Search results

  1. bmo37

    Which Fluid is the BEST for the T5

    thats what i have in my tko, you can actually buy a pennzoil equivelent called just plain synchromesh.
  2. bmo37

    mother of god i think the steering took a crap

    yep sounds like the ps motor is low on fluid, manual rack isn't that expensive think around 400 bucks with a new steering shaft.
  3. bmo37

    Speedo Drive gear

    nope the stock tranny in a 93 (assuming this is the car your talking about in the thread) has a 8t drive gear so you'll need a 23 tooth speedo gear, there is no need to buy a drive gear only the speedo gear. also the gear is white.
  4. bmo37

    votech baseline blower

    thats what i have on my stang and i threw a boostmaster powerpipe on there and netted me 2-3 extra lbs of boost. I do suggest getting another discharge tube that has a provision for a bypass valve, otherwise you may have idle and or deceleration issues. I was very happy with my v1-sc I paid...
  5. bmo37

    Installing typhoon intake...having problems...vacume lines???

    here's one i did. actually there's no right or wrong way as long as you connect everything someone and nothing is left open or not connected
  6. bmo37

    What causes A-Pillar Cracks?...picture

    how about the engine chassis brace that connects the 2 strut towers
  7. bmo37

    Anyone with Tremec 3550 knowledge

    pretty sure the tremec tko is a 7t
  8. bmo37

    5.0 is an expensive engine

    reason number 1 I live in new jersey reason number 2 I live in new jersey reason number 3 I live in new jersey believe it or not thats a great rate around here for that car. its not uncommon for people to have to pay 3 even 4 grand a year for a mustang or any sports car for that matter. And...
  9. bmo37

    Anyone with Tremec 3550 knowledge

    can't remeber if its a 7t or and 8t for the speedo drive gear, I just bought one for mine, a red one cause i have 3.73's
  10. bmo37

    Car wont shift..

    rule of thumb is the tob should be 1/8 inch from the pressure plate arms, and the firewall adjuster should be about 1/4 inch gap adjusted out, but that can all vary depending the cable, and other tolerances
  11. bmo37

    5.0 is an expensive engine

    800 bux a year more for the stang for me, seperate on its own policy its 1600 year for me here in jersey
  12. bmo37

    Running Rich!!! But Why??

    o2 sensors may be going.
  13. bmo37

    Pressure plate bolts

    very simple tap 3 dowel pins into the flywheel, align pressure plate onto the dowel pins and the bolt locations are right there.
  14. bmo37

    which supercharger is best?

    I persoanlly think the prochargers are the best but with that comes more money, they are over priced if you ask me. I went with vortech and like it, whether or not its the best is another question, same with paxton. It all depends on what your looking for and will suit your application.
  15. bmo37

    T5 to TKO or C4 swap

    i went the tko route and am very happy with it. the tko 500 comes in to models the 26 spline input shaft or 10 spline which is stock, so if you just bought a stock clutch and don't want to shell out andother 300+ for another stage 3 I'd get the 10 spline (thats what i did). the bellhousing is...
  16. bmo37

    Just got a Tremec TKO 500!!!

    i actually like the 500 shifter, I bought a upr aluminum lever widened the holes a small amount and it works great.
  17. bmo37

    Will my blower combo be a dog N/A?

    like stated if you have smaller valves that will help with the lowend and torque down low but if its some big heads than its going to be slow, ever see the rated hp for a new crate 351w with 8:25.1 compression its like 210hp.
  18. bmo37

    Ceramic or chrome headers ???

    mac hts isn't a ceramic coating just a tacky like heavy duty paint. go with the ceramic they will last opposed to chrome ones that will turn blue in a few weaks and rust like there's no tomarrow
  19. bmo37

    Will my blower combo be a dog N/A?

    will run like a truck on the street but no beast with that compression. I have close to 10:5.1 with a blower about 9lbs of boost
  20. bmo37

    Just got a Tremec TKO 500!!!

    yep but the extra splines on the tko make it stronger, you and can also get the input shaft on a tko with a 10 spline stock style clutch or a 26 spline which is even stronger. I ened up paying $1550 for my tko500 and spent another $200 for the slip yoke and bellhousing. Also the tremec takes...
View older results
Top Bottom
Back
Forums
Menu