Search results

  1. Chern_889

    Electric or mechanical Autometer water temp guage, whats more accurate?

    Dont you guys get nervous running coolant/oil into the interior with mechanical gauges? whenever i decide to buy a couple gauges, they are going to be electric
  2. Chern_889

    Dropping the T5 - Pull the bellhousing with the tranny or separate?

    I had to chuckle when i read this, ive done my fair share of tranny pressin' Ive only ever pulled the tranny seperate from the bell housing, its only four bolts. Just make sure you support the bottom of the engine before you start un bolting, or else it will put all the weight of the motor...
  3. Chern_889

    Intake Vac Line Questions Need HELP FOR THE AM!

    Thats this one, but i dont know where the other half of those Ts go??? Also, most of my hard lines from the smog stuff leaked, i capped off the AIR lines, as i elimanted that smog stuff, and i re-did the EGR line with rubber hose, my only good line was the red one, as you see in the pictures
  4. Chern_889

    Intake Vac Line Questions Need HELP FOR THE AM!

    . The Big line from that T goes over to the vaccum tree by the Brake booster, the one on the back, in that picture, goes to the FPR, and the one on the top, that looks like it is block off, is actually the vac source for the emissions **** hidden underneath the pass. side fender. That line...
  5. Chern_889

    Intake Vac Line Questions Need HELP FOR THE AM!

    Im really not sure, i suppose you could, you have enough empty ports. I dont know how a fox is set-up, but you should try and mimic that i guess:shrug:
  6. Chern_889

    Intake Vac Line Questions Need HELP FOR THE AM!

    Thats how i set up my edelbrock, i think the PVC needs a two good vac sources, and hoses are pre-formed to fit that way
  7. Chern_889

    Intake Vac Line Questions Need HELP FOR THE AM!

    Best i could do with paint, and using a combo of you pics and my own car EDIT: Damn, you beat me to the punch, o well Where it says not sure, thats actually the line supply for the HVAC controls, it goed into the FW right by the Air conditioning tubes, in the rubber grommet that...
  8. Chern_889

    Which tires? What do you run?

    Thanks for the opinions, im gonna have to go down to Kal tire here one day soon, and get some prices
  9. Chern_889

    Which tires? What do you run?

    I wouldnt say i Drive in TONS of rain, i just want something that can be predictable for when i do get caught in the wet
  10. Chern_889

    Which tires? What do you run?

    Well, i finnaly realized this morning that my tires are past thier prime. I got caught in a rapid downpour of a storm on my way to work, and it was sketch-tastic. I was hydro-planing all over the place and had trouble maintaining 90 in a 110 limit(KM/H). So needless to say, im in the market for...
  11. Chern_889

    PIC needed, Keyless entry, please help

    well i looked again, and i dont have ANY of that big fat bundle that runs along the trunk pan in your picture, all i have is one small harness that leads to the tail lights/fuel pump, and thats it. So unless that bundle is hidden somewhere good, stock keyless entry is no longer in my books, dang.
  12. Chern_889

    P heads and SMOG

    He doesnt have to leave any of that stuff on the car, The GT40Ps have no provisions on the back of the head for any recirculation of anything, so it renders all of the Air pieces useless and just taking up space, you wont be able to make it properly function. Not sure what you mean by...
  13. Chern_889

    P heads and SMOG

    Thats what i did, works just fine, screw in a screw, and wrap some electrical tape around it:shrug:
  14. Chern_889

    P heads and SMOG

    Gotta love Canada for that reason, **** the enviroment:canada:
  15. Chern_889

    P heads and SMOG

    arent you running an offroad H-pipe? just remove the tube all together, its only to heat up the cats, which you dont have
  16. Chern_889

    P heads and SMOG

    why bother keeping the smog, if your going to be bypassing it anyways? if your worried about a visual inspection, just leave it in there until you get inspected, then pull it out. It cleans up the engine bay so much, and makes plug access so much better.
  17. Chern_889

    PIC needed, Keyless entry, please help

    thats wicked man, thanks alot, ill have to get that whole plastic holder thing, as i dont have one
  18. Chern_889

    Official Adam95gt Pictorial Progress of Swap / Clean Up

    We have a place in Canada called princess auto, similar to the american Harbour frieght, i think. They sell welding cable by the foot, in all sizes, which would work perfect for that, or you could buy a 4gauge Stereo Amp kit, although you will prolly pay out the a$$ for that
  19. Chern_889

    High idle, crappy fuel mileage. Solution?

    Use this With this Checking your Ford Mustang computer codes PS:Those connectors are located on the pass side in the engine bay, between the shock tower and firewall
  20. Chern_889

    Anybody for a little NOS?

    Haha thats pretty funny, all of those additives are such a rip off. I like how the one guy said "put a NOS sticker on a bag of dog ***** and people will buy it". Its so true haha Edit: HAHAHAHAHAHA i just got to the part where he realized it wasnt a fuel additive, oh godddddd, im killing...
Top Bottom
Back
Forums
Menu