Search results

  1. 3

    does the new 302 boss block use canted heads?

    You must use pistons specific to the C302/C3 or aftermarket Cleveland heads.
  2. 3

    K member bolt kits?

    TeamZ also has these kits. teamzmotorsports.net
  3. 3

    Pro-comp Heads?

    What Joel said. I am a happy Pro Comp cylinder head owner. Happy I sold them after correcting everything that was wrong with them and buying larger, port volume cylinder heads for my 302 based RR setup.
  4. 3

    Spark in one cylinder

    Check your "salt and pepper" connectors at the firewall. Or at least that's where they used to be located in the 86'. Just unplug them and clean them up.
  5. 3

    what would cause a valve to look like this??

    fuel additive.
  6. 3

    HARMoNIC BALANCER?

    If it's a stock rebuild than 50oz. If it's an aftermarket build, you will need to know if the crank is externally balanced to 28oz or 50oz.
  7. 3

    HARMoNIC BALANCER?

    What year engine to be more specific?
  8. 3

    Can't figure this out, really need help.

    Your clutch is pushing the crank into the thrust bearing!
  9. 3

    what are the things that can make a fox body wander around on the road?

    Poly/Urethane bushings squeek. It's the nature of the beast. You still have to check your "toe".
  10. 3

    what are the things that can make a fox body wander around on the road?

    Poly bushings squeek. It's the nature of the beast. You still have to check your "toe".
  11. 3

    what are the things that can make a fox body wander around on the road?

    Push left/right on the front. Do the same on the rear. If you hear popping/clunking... you need to check your fasteners and bushings. You didn't mention "toe"... if it's toed out, you'd have the same symptoms.
  12. 3

    Carb help for 408 stroker

    Is that "wet" flow????
  13. 3

    cast iron vs aluminum

    If you're not "class" racing, a good set of aluminum cylinder heads is the way to go... hands down. Aluminum will allow you 1pt up in compression for its ability to shed heat. Inline and < 15* valve angle such as World Products Man O' War 10* heads promote very good performance. Twisted...
  14. 3

    Are these Trickflow heads?

    Sonny Bryant, Fred Carillo, Jr. Arias, and maybe TFS would be uncomfortable with the power and ET/mph this machine puts down. And I agree... to post "sounding" like an expert at making 400rwhp is embarassing when you have what "you" have in it.
  15. 3

    302 Engine Block Q's

    Post up pictures... that is an uncommon area to crack.
  16. 3

    Are these Trickflow heads?

    TFS cylinder heads keep making improvements with every generation they put out with the Twisted Wedges. IMO, yes, the newer style perform better than the older ones. TFS now makes the "Fast as Cast" version of the TWs. There are also the "Porters Cast" heads, which can be made far...
  17. 3

    Are these Trickflow heads?

    If there are no no logos etched into the ends, it's an older set of TFS TWs.
  18. 3

    Are these Trickflow heads?

    I believe even the older TFS heads had the part number on the end of the head. btw... you're pretty close to me too.
  19. 3

    Rear end rocks side to side?

    I assume you used the old factory bolts? If so, the grip length is probobably correct, but I try not to assume anything. Hell, I wouldn't even assume the hole diameter in the replacement UCAs are correct. If you installed your own bolts, you may want to check for their grip length. If you...
  20. 3

    Rear end rocks side to side?

    The upper control arms assist in setting pinion angle AND... keep the chassis centered over the rear axle fairly well without a Panhard or Watts link. If you have noticeable movement, you definitely have an issue with the UCA's and/or their supports. I just have to ask... do you have the...
Top Bottom
Back
Forums
Menu