Search results

  1. T

    Taurus ECC-IV in the stang?!

    My turbobird has one from a taurus. Atleast it says it on the gray factory tape :shrug:
  2. T

    Hows this look?

    Im porting with carbide bits now. I just wanted to know if im heading in the right direction. Do i need to remove more in the ports or should i leave what i have alone? I will have better pics today. Thanks guys
  3. T

    Hows this look?

    I started this tonight and will be sand roll'n it with 80 grit. If anybody sees anything that needs work please let me know. Any help would be good. *Light isnt the best, i'll have better pics tommorrow*
  4. T

    1g dsm bpv?????

    I put one my stang and when i start the car it stalls out. Hers what i did..I mod the 1g with the vaccum port for quick release. I then put it on the turbocoupe ic on the turbo side. Then ran a hose to the vaccum tree. Now it wont start. :shrug: Im not sure what im forgeting. For the quick...
  5. T

    does any one know this guy

    When things break you learn. :D
  6. T

    WATS THIS? 2.3L ***S! U GUYS ARE GAY

    BAN THIS MOFO PUNK! I dont know if it was the fact that a 2.3 guy screw'd his girl or the fact that she is pregnant Hahahaha bitch go away.
  7. T

    WATS THIS? 2.3L ***S! U GUYS ARE GAY

    Bring your car down and i'll introduce you to my wifes car. Sounds as if a 2.3 mite of spanked him and now hes pisssst.
  8. T

    Boost guage reading

    The car fills like it falls off but picks it back up. Its a free sunpro guage and i know its bad so i order'd a new auto meter guage. Another thing when the car idles it has a bad bump or miss to say. Can you guys give me any thoughts. I ran a 14.8@98 with a 2.599 60'. This was on small 225...
  9. T

    Boost guage reading

    What gear is best for reading the boost? When im in 4th gear and full throttle until it red lights it shows 16psi and if i do it in 2nd gear it will hit 18psi and then the guage flickers.
  10. T

    I do not what to do

    Hell yes im happy and you will be to. Do the swap you wont regret it.
  11. T

    Fast idle

    Theres time when i can hear alittle miss. I ran it friday with 18 psi and ran 60'=2.499 330=6.475 1/8=9.72 mph=75.87 1000=12.493 1/4=14.80 mph=97.91 I know this is off topic but it was ran on 225-60-15s.It pulls hard and when idles fine it is fine. I just thought maybe somebody had the...
  12. T

    Fast idle

    I start my car and it will idle around 1100rpms thats ok. The thing is when i go down the road and come to a stop it will idle 2500+rpms[its a five spd]Now if i turn the car off when driving down the road and restart it the car idles fine. Any body have the problem? If so please help.
  13. T

    88 TC 2.3T into my 86 coupe Wiring nightmare or ??

    Go to Stinger performance. He has all you nedd and more. I followed his steps and never went wrong. My car kicks ass. No more 5.0 for me
  14. T

    Cleaned up garage does anybody need anything?

    How much for the ranger roller? How much fot t30?
  15. T

    87 red turbo notch forsale in classified

    Im selling my turbo notch. Got some mods and new stock parts. Go look in classified.
  16. T

    worthwhile mods for a NA 2.3?

    Full exhaust,gears,good clutch,lots of porting,cam,slicks and lots of nitrous[300 shot] :nice:
  17. T

    what gearing does everyone recommend??

    I got t-5 with 8.8 and 3:73s and drive it on the highway.
  18. T

    Damn Follower

    Well i thought i was screwing up the timing marks and that wasnt it. So i moved to the injectors and that wasnt it. Now im like wtf car starts but has a bad miss and lopey idle. So my brother say tear off the valve cover and see if anything is wrong in the valves. Off came the cover and long...
  19. T

    What to do with $500?

    Just buy my turbocoupe. Dan P wanted to buy it but never got back to me. So i'll try to sell it again. 86 tc t-3 5spd with new struts,shocks,heatercore[still in box],endlink kit,water pump and thermostat. Also gillis valve and mac air filter. I drive this car during the week. $550 takes it...