Search results

  1. FastmanGT

    oil in the upper intake

    Those look like the ones I have on my car. They have been on there for about a year now and no leaks what so ever from them.
  2. FastmanGT

    Nitto DRs vs BFGoodrich DRs

    I will be in the same situation you will be once I get some drag radials. My track is about 35 miles each way, which is reason I am looking into the Nittos.
  3. FastmanGT

    Just installed goodies, but have some probs

    The length of the belt can be a little different but I haven't heard of going as small as you have just to delete the smog. It almost sounds like your tensioner is starting to go on you.
  4. FastmanGT

    Just installed goodies, but have some probs

    How small did you go on belt sizes for the smog delete?
  5. FastmanGT

    oil in the upper intake

    Well, it could be a PCV problem, when was the last time you replaced the valve, rubber grommet, and the breather filter that is below that? Have you checked the rubber hose coming from the PCV to the intake, if there is a rip in it, that could allow blow-by oil to spray on stuff.
  6. FastmanGT

    oil in the upper intake

    If your problem is actually a leak, it has to be the gaskets. Sometimes the rear gasket for the lower intake leaks if you dont get some RTV in the corners. When I had to replace my intake gaskets about a year ago, we used a Fel-Pro gasket kit from Pepboys, it came with these blue rubber seals...
  7. FastmanGT

    oil in the upper intake

    I have this problem as well, the oil blow-by into the upper intake. I run the same intake as Eric does, but I havent gotten around to "fixing" the problem.
  8. FastmanGT

    B&M Hammer Shifter

    Well, I will be the one installing mine. Honestly, I cant see it being too hard.
  9. FastmanGT

    Radiator Cover is Finished!

    If any residue is left, rubbing alcohol should remove it just fine...
  10. FastmanGT

    B&M Hammer Shifter

    Anytime man.
  11. FastmanGT

    The best AODE

    The Mickey Thompson website says something about a 17 in. ET Street, but I really dont know anything about it. If I was going to get a set of rims for daily driving, I would get the normal street radials we all run. For a set of wheels for the track, I would just get some Weld Pro-Stars for...
  12. FastmanGT

    B&M Hammer Shifter

    With a full manual valvebody, yes.
  13. FastmanGT

    The best AODE

    Nitto NT 555R Drag Radial 205/55R-14 $92.00 P245/45R-17 94V $160.00 245/50R-16 $140.00 275/40R-17 $160.00 P275/50R-15 101V $156.00 275/60R-15 107V BLK $143.00 305/45R-18 110V B $242.00 315/35R-17 102V $185.00 BF Goodrich Drag Radial Comp T/A P215/60R-14 $126.00...
  14. FastmanGT

    B&M Hammer Shifter

    You have to wire up a switch for OD. You hit it while you have the car in 3rd to go into OD.
  15. FastmanGT

    Radiator Cover is Finished!

    Looks really good!
  16. FastmanGT

    The best AODE

    Nitto Drag Radial... BFG Drag Radial... ET Street... You should be able to see why the ET Street wouldn't be fun in the rain, but would hook very good at the track.
  17. FastmanGT

    The best AODE

    Well, the drag radial is going to a better street friendly tire. You can drive on them just like a normal street radial. When you just up the drag radials, you got to get them nice and hot and then you can rip some decent 60' times. Nitto and BFG are the major makers of them, MT has some out...
  18. FastmanGT

    The best AODE

    I have not done a ton of research on a suspension setup that I will want to go with just yet. Maximum Motorsports and Lakewood seem to make some of the best products out there. I do like the cost of the Strange shocks/struts from Jegs, I just haven't heard of anyone using them yet. Our tracks...
  19. FastmanGT

    The best AODE

    Well, with our cars I have seen good results from just using drag radials or ET Streets. But doing suspension will make it hook better. It just depends on how far you want to go, upper/lower control arms, struts/shocks, and springs. Anything that will help with weight transfer, will help you...
  20. FastmanGT

    Tranny cooler.

    Thanks RC, I will look into the B&M products as well. So far I just have all the parts sitting beside me, the rebuild kit, valvebody arrived on Thursday, and converter arrived yesterday. The biggest enemy of the auto tranny is heat, if the fluids temp gets too hot, it can start to burn up and...
Top Bottom
Back
Forums
Menu