Search results

  1. A

    Roller rockers?

    no, there was a thread on this recently where a guy lost some power, the heads dont flow enough, and neither does the stock intake imo
  2. A

    Headlights don't work.. what to check?

    i've had the headlight switch go out on me on two different stangs, and after 30K miles the second one is starting to get sketchy on my stang now, i would certainly check that
  3. A

    The 306 Dyno Challenge.

    i'll bet 5000$ he doesn't do it all motor, and to do that on spray is nothing special, i know a guy who put that number down on a stock bottom end with cast iron heads!
  4. A

    stang 60ft questions

    i'm not really expecting the car to 60ft well on street tires and stock gears, i just dont want to do something that will make it worse than it already is since it already leaves the line so badly
  5. A

    stang 60ft questions

    so you dont think that the bbk springs will stiffen the front up that i can take the sway bar off? keep in mind that my rear springs are just stock. coud i just disconnect one end of the swaybar and drive around without fully taking the swaybar off just to see how much it affects my handling?
  6. A

    stang 60ft questions

    i got the bbk springs for free, so i was thinking that i could remove the swaybar and then install the springs since my rear springs are stock, the car should handle about how it does stock, but look cooler, be about 15lb lighter and maybe launch better what do you guys think about this? if...
  7. A

    stang 60ft questions

    all stock suspension with polyurethane isolators and poly control arm bushings, 1989 GT, 5 spd, street tires, stock gears, all bolt ons, 100 shot of nitrous, MAC lower control arms question is: 1. will installing BBK 1.5 inch lowering springs in the front only make a noticable difference...
  8. A

    pics of welded lower??

    http://www.tmossporting.com/Community/Forums/tabid/330/view/topic/postid/157/forumid/47/tpage/1/Default.aspx#190 here is a pic of tmoss's welding on his ported stock lower intake
  9. A

    3.73's and highway speeds

    this post is starting to get pretty silly, 2 points i'd like to make 1. the "theoretically possible" life of a mustang motor if properly maintained is many hundreds of thousands of miles, my first lx had 175K miles, everything stock, never even had the headers off, didn't burn a drop and had...
  10. A

    Share Your Setup and Help with mine!

    there is a lot of big talk on here for a car that just wants strong 12's, all these combos here will get 12's but i have friends with nothin more than gears/exhaust/fewbolt ons and a 100 shot of nitrous or a 6 psi blower that rip 12's all day long and are super fun on the street, i say just...
  11. A

    Anyone else burn up their cap and rotor a lot?

    weird, i change mine often cause i like to waste money, but never 5 in a year! i go through a cap and rotor every 5K miles MAYBE... thats with nitrous shots here and there also :cheers:
  12. A

    Best intake for slightly worked GT40P's?

    :D typhoon intakes are cheap and should flow about the same, i see em for 200$ all the time on the corral classifieds, possibly a bit too big, but good if you go for nitrous or a blower later, maybe tmoss can chime in, hes the intake jedi!
  13. A

    which thermostat do you recommend?

    i run a 180 down from the stock 192', helped my car run a tad cooler, mr gasket thermos rule also! much better than kragen brand :mad:
  14. A

    pics of welded lower??

    bump, why moved?? this is for a 1989 GT 5.0 5 spd, btw
  15. A

    Port&Polishing intake

    tmoss has his own website with all the answers you need, he is the intake porting yoda www.tmossporting.com
  16. A

    Exhaust..two questions

    i barely noticed anything also, i suggest nitrous! i noticed that for sure! i have heard gears are good for seat of the pants, you should notice heads and intake swap also, i notice a good difference after i lightened my car up and ripped out about 200lbs of stuff, and that was freee....
  17. A

    pics of welded lower??

    pics of welded lower intake?? whats up yall, after starting to port my stock lower for my 1989 GT using a 1986 lower, i'm now deciding to weld it a bit to let me get more out of it since i have a friend who is learning to weld and will do it for free :banana: anyone have any pics or links...
  18. A

    Custom Ramcharger fan harness questions...

    bump, i ve been thinking of doing this and would prefer to do my own harness for the same reasons, bizzump
  19. A

    1.7 rockers make motor sound "cammed"?

    kind of trivial question, but i was told my car had an E cam in it when i bought it but am skeptical, the car deginately has less torque than my old lx had (though that car had the 3.27 gears, vs the 2.73's i have now) is there any way to tell for sure if a car has a cam in it? what about if...
  20. A

    86vs87-93 lower intake...any difference

    i agree! tmoss was actually the guy i was refering to when talking about people making beasts with the stock intake! tmoss, your the lower intake porting yoda: are the 86 lowers the same as the 87-93??? they look identical to my untrained eye but maybe they are thinner or thicker in critical...
Top Bottom
Back
Forums
Menu