Search results

  1. G

    Small Video I put together

    Yes, that was one of the funnest parts of owning a DSM, seeing a stock C5 and other V8 guys face after he gets walked is priceless I loved it. The upkeep on a DSM is pretty high and the body had a lot of rust(Previous Owner drove it in Ottawa winters) I would have loved to keep the TSI is was...
  2. G

    Mangaflow vs Magnapacks

    Well I like my Magna Packs they sound F-Great IMO The link below is when I first installed the Magna Pcak on the car with Stock H and Headers. I loved it, hope this helps http://video.google.ca/videoplay?docid=-3624704614690121769
  3. G

    ADVICE& HELP NEEDED URGENT!!!!

    I am not sure about the oil pan thing mine seems to be holing up good so far If I did not break the dip stick and have an issue with the 02 sensor this job is doable in 1 day although breaking it up into 2 days is a better idea, I am in Ontario so it like -20 out here and the garage is not...
  4. G

    ADVICE& HELP NEEDED URGENT!!!!

    Well I ended up having to push whatever is left of the dip stick into the oil pan like suggested and I am going to drain the oil and pull it out this weekend. I have a few other issues also, The 02 wire extenders summit sent me don't fit the grooves don't line up, I am going to send them...
  5. G

    Small Video I put together

    01 yes that was for the video but I wanted it to go out a bit more lol but did not quite work out Benny the best I ran with that was a flat 13 it was on the same day I ran the Z06 on the video. The following season I had stage 2 cams but crappy clutch so did not break into the 12's with it...
  6. G

    Small Video I put together

    So I put a small video of my cars the DSM's and now the mustang. This is my first time putting something like this together so wont be the best but I am going to share it any way. http://video.google.ca/videoplay?docid=-6682083719888734059 Later
  7. G

    ADVICE& HELP NEEDED URGENT!!!!

    :lol: the way I see it if that works, the crappy smell for a bit it way better than the headache that I am going through right now. :)
  8. G

    ADVICE& HELP NEEDED URGENT!!!!

    I will give that shot this week some time, proll Tuesday or Wed night. I was thinking of trying to tap into that piece and pull it out, but the concern in metal shavings in the oil pan. <--- any thoughts on this
  9. G

    ADVICE& HELP NEEDED URGENT!!!!

    I would spray some of the penetrating stuff when you start the the job and do it a few more times till you get to that point where it has to be pulled out. That might help a bit. The job is not that hard( just follow the instructions form the last post), honestly we started working at...
  10. G

    ADVICE& HELP NEEDED URGENT!!!!

    Sorry I will clarify . The piece is stuck in the bottom end. The dip stick goes in a hole in the block (squeezes in) well the part that squeezes in the block is still there where the rest broke when we where trying to pull it out of the block so its not in the oil pan
  11. G

    ADVICE& HELP NEEDED URGENT!!!!

    Hey So I was in the process of installing BBK LT's on my GT got everything out there was ONE last thing to do and it to take oil dip stick thing out. While trying to get that POS off the bottom TIP BROKE :mad: in the MOTOR 2X :mad: :mad: :bang: Now its stuck in there and we...
  12. G

    Considering a mustang, have questions

    Well if gas mileage is an issue for you (Student Understandable) maybe a STANG is not the best car for that. Unless you don't have to drive a lot and you live close to school. Then Do IT I use to have an 88GT when I was in school and loved it even though it put nice dent in my $$ flow gas...
  13. G

    Header gaskets and Spark plug recommendations

    Cool Thanks :nice:
  14. G

    Header gaskets and Spark plug recommendations

    Now what does Installed correctly exactly mean?, I have some good instructions on how this process is going to go http://www.fnsweet.com/garage/lt_install/index.shtml They don't say what Spec Torque specs to etc. If I use the Stage 8 Header Locking bolts, will in be needed to Heat...
  15. G

    Header gaskets and Spark plug recommendations

    Laser I have an Xcal 2 Tuner so I am going to get the tune form them. which one do you use? Like steveb24 , should we use Loctite :D
  16. G

    Header gaskets and Spark plug recommendations

    Hey Guys So in the next week or so I am going to be Installing the BBK LT’s and I was wondering the following 1- what is the recommended header gaskets to put on this application? 2- I also read that I should use some kind of gasket sealer when I put the LT’s what is recommended here...
  17. G

    VRS O/R X, Prochamber, or BBK H

    BBK has cated X pipes also, I just purchased them today off Summits site Not sure if you want to add that to your poll
  18. G

    bbk or ford racing

    LOL Yes, I saw that after.. Thanks for the tip just ordered them form Summit Operation LT will start this weekend...
  19. G

    bbk or ford racing

    Sorry for the crappy edit but thats the best I can get it
  20. G

    bbk or ford racing

    So which one is better as far as collectors and flang thickness ? is thinker better ? BBK-1541 VS BBK-1533 Collector Attachment : 2 Bolt Flang Stock Flange Thickness(in): 3/8 in 1/4 in Primary Tube Gauge: 16 Guage...
Top Bottom
Back
Forums
Menu