Search results

  1. R

    Is the Kenne Bell blowzilla too small for a 351?

    KB 2.1 will not keep up with a 351W beyond say 8psi. waste of money. ........... slap a couple turbos on her. and yes, lower that compression a lot if you want to run boost. Even with 113 octane E85 you will have detonation concerns. E85 plus water/meth injection would probably get you by though.
  2. R

    Power Steering MIA

    2 groove pulley ?? V-Belt ???????????????????? Ford racing makes a $60 bracket to mount stock p/s pump in stock location on a 351W into a Fox mustang using stock serpentine belt. You can also use GM Type II p/s pump with remote reservoir with custom bracket if space is an issue.
  3. R

    Fox guys with 351W and longtubes..need help

    Long tubes on a 351W are a nightmare. Had to modify my steering shaft and grind on bellhousing a little to make my BBK's fit. Even then they had to be installed from the bottom with the motor lifted up off the engine mounts. have fun ............................ :D
  4. R

    help finding sn95 spindles, and 5 lug questions

    www.ebay.com I got complete 1995 spindles with rotors, calipers and brake lines off ebay for little over $200. Then get the SN95 ball joint swap kit from 50resto.com and have machine shop swap them out on your control arms for you. Excellent write up http://www.stangnet.com/tech/lug.html
  5. R

    THE 331 WENT ON THE DYNO TODAY!!! *VIDZ**

    You just need better "stroker" cam. I run 24's on my 357ci and make 350rwhp, yes runs a little lean at 6,000+rpm, but how long and often you holding 6,000rpms? 30's would be better, but I wouldn't sweat it that much. and yes, your computer knows air temp going into engine from the Air Intake...
  6. R

    351W in a 89 Fox.. Lots of questions

    You live california you cant legally do the swap anyway since it never came in the car from the factory............................
  7. R

    351W in a 89 Fox.. Lots of questions

    Vortechs require bracket to be shipped off to be modified to fit 351's in a Fox. just get a turbo on it.
  8. R

    Tremec T-56 Swap

    www.ddperformance.com sells complete T-56 swap kits with the right bell, d/s and x-member, prices vary on how strong you want it. ....... Regular or Viper Spec
  9. R

    How to make 350Hp to the wheels

    See Sig below .............................
  10. R

    Convertibles

    They should, new edge was still on Ford Fox chassis. all mustangs until the new S197's are still really "Fox Bodies" Thats why the late model dashes fit, and center console and can even swap over the Terminator IRS rear ends. Ford used the "Fox" unibody on a TON of different cars for a...
  11. R

    a/c or no a/c?????????

    You only lose hp when the a/c is on. otherwise you're losing maybe 1hp to just spin the compressor when its not running. Keep it
  12. R

    Convertibles

    Looks good, Black on black with some more black, lol thank god you didn't put black wheels on there, I hate that. Sharp ride, nice and clean and its a '91????? I thought those were '87 tail lights?
  13. R

    ecm?

    The ECM ground is right next to battery on fender well. make sure it has good firm conection
  14. R

    I think someone is trying to SCAM me trough the stangnet classifieds !

    First word that popped into my mind. You guys want a good laugh? Read this ....... "Scamming Nigerian Scammers" :rlaugh: :rlaugh: http://www.ebolamonkeyman.com/Ablert_Fred1.html
  15. R

    Convertibles

    Thank You Paint Code: 2H
  16. R

    Convertibles

    Paint Code door tag reads: Body: 66B VR: M Intr Trim: PY Tablet PC is plugged into my AEM computer running AEM Pro's "Dashboard" feature. My top is tan, not white.
  17. R

    Convertibles

    Well I dont have any Convertables, but I do have a Convertible
  18. R

    BBK SSI intake setup ????

    I had one, they suck, don't waste your money. Get a Trickflow R or Holley Sys II intake for a 347
  19. R

    New Cobra R's - PICS

    Thanks everyone
  20. R

    New Cobra R's - PICS

    50resto generic Silver Cobra R clones 17 X 9 with 245/45R17 up front Mickey T Street E/T out back 26 X 11.5 R 17 (basically a 265-275 tire) Stock ride height, zero clearance problems. HOLY COW these Mickey's grip, tried couple of normal street launches and it just bogs like a mo-fo, I'm...
Top Bottom
Back
Forums
Menu