Search results

  1. lenko

    New bumper doesn't align with fender

    My 2006 rear bumper cover had a small gap from new. I read somewhere to give the bumper a smack from below. I did that and it clicked into place. Maybe that might work on the front bumper cover.....??
  2. lenko

    Expired WTB Saleeen Series VI.5 Mustang Supercharger Housing 2 piece like below for 2006 Mustang located in Lethbridge, AB Canada.

    Looking for a two piece Mustang Series VI.5 Supercharger housing (case). If anyone has any information on one please let me know.
  3. lenko

    Hi From The Uk And Help Please!

    Looks like the other thing new as I read in your post is the Ford Racing intake manifold. These sometimes tend to flex out with the added volume of air (pressure) from the Vortech - could be your problem. causing some sort of leak or vacuum irregularity. A couple of years ago before I...
  4. lenko

    Hi From The Uk And Help Please!

    Check for a cracked spark plug. Could be very minute and not noticeable.
  5. lenko

    Another 70mph Vibration Question

    The first time I changed gears in my rear end, I had a vibration about that speed. Somewhere on the forums I read to add a washer to one of the pinion flange bolts, which I did and I eliminated the shimmy or shake.That was back around 2006 just after I got the 2006 GT when I installed 373s...
  6. lenko

    Engine High Rpm Cold Start

    Need to work with your tuner guy to correct this.
  7. lenko

    Ring And Pinion Gear Pattern

    From a post I put on another site: Look up James Adkins instructions on gear install. A honed out used pinion bearing really helps. Do the master housing dimension exercise. Measure your old pinion head in a number of placed and do an average for the measurements. Measure your original pinion...
  8. lenko

    05 Mustang Gt Diagnosis Help....hard Fix!

    The XCal2 was 7 years old, obviously warranty was long gone. I took it apart and saw that the green wire on the obdII cable had broken off the fecp solder point. Re-soldered it and now the loader works again. If anyone has the "Turn key on Do Not Start" flashing until the power up times out...
  9. lenko

    05 Mustang Gt Diagnosis Help....hard Fix!

    Haven't installed it yet but will see after that. Right now it runs great except for a failing alternator (it seems). The SCT Xcal2 I've had for 7 years seems to have packed it in. Possibly from this P0340 code or failing alternator. Can't load tunes and am researching that.
  10. lenko

    05 Mustang Gt Diagnosis Help....hard Fix!

    Not my theory, but that of the author. Looks like being a mechanic and putting a lot research into this you were able to circumvent the need for a tune. You have the equipment and knowledge to figure all this out - more power to you. I already had a tuner when I installed my deletes and...
  11. lenko

    05 Mustang Gt Diagnosis Help....hard Fix!

    This seems to be the best explanation: Originally Posted by Preston951 TacoBill's tech thread to the rescue, once again!!!! Mod: Charge Motion Control Valve Deletes (aka CMCV Deletes or just Delete plates.) Tune: ALWAYS, Car will go into limp mode without one. Why: The intake manifold of the...
  12. lenko

    06 Gt 3.73 Install Nightmare

    You should have measured the pinion head you took out and then the new head and with the difference and the original shim, you could have calculated what size shim you need. Just to say the fitment looked good isn't very exacting. Look up an article by James Adkins...
  13. lenko

    Comp Cams Hard Start?

    Shouldn't have to pump fuel injected car. Have comp cams 127300 VSR for close to 3 years it starts by simply turning the key.
  14. lenko

    05 Mustang Gt Diagnosis Help....hard Fix!

    If you changed the cmcv plates by taking the flaps(manifold runners) out, then you need a tune for this. You essentially made delete plates which require a tune.
  15. lenko

    2006 Mustang Harmonic Balancer Removal

    Driver's side at front of transmission is where the rubber boot can be pulled off to get at the torque converter bolts, or you might be able to get at them by removing the bottom inspection plate (two bolts) from under the front of the transmission. You'll need help for someone to hold the...
  16. lenko

    Dropping the rear axle - does anyone have any tips?

    Try this site, you do not remove brake lines, you remove and hang (with support) the brakes. http://iihs.net/fsm/?dir=94&viewfile=Axle%20Housing.pdf
  17. lenko

    Auto Trans Issue. need help

    Reinstall your tune. Oil change wouldn't affect it unless they didn't put oil or drain plug back in
  18. lenko

    Spark Plugs for 06 GT

    Bought mine from RockAuto about a year ago, one plug the little cone slipped over the spark area (brand new in box). Rock Auto wouldn't warranty their sale and had to go to Champion Canada who arranged to replace locally. The past few weeks my 06 Mustang GT has been driving me crazy, running...
  19. lenko

    New hood on a 2006 GT, now engine is running lean

    You'd think with the cooler air coming in it would run better. Computer and oxygen sensors work to some degree to adjust fuel. A tune adjustment is likely required as it shouldn't be that finicky just for more cooler air.
  20. lenko

    rear gears

    I did 373 in my auto and it made a large difference in "fun driving" - quicker more nimble. Lost a little gas mileage - maybe 1 or 2 mpg. Then I did 410s and it was even better for driveablility. Again lost 1 or 2 mpg. Definitely makes the car more responsive and accelerate better, but will...
Top Bottom
Back
Forums
Menu