Search results

  1. bdazzgt

    Help with my overheating problem, not the typical problem

    that combo also 200 dollars more and doesnt include the relays i need then i had to spend, i may send the electric fans back and get something else i dunno, i will see how the radiator runs first, then install the fans i do like that advice
  2. bdazzgt

    Help with my overheating problem, not the typical problem

    Well since yesterday was my birthday, my mom and dad bought me full length sub-frame connectors and dad got me a 3g alternator last year. im excited as hell about all the new parts. my only question is will the two fans be enough for the new motor?
  3. bdazzgt

    Help with my overheating problem, not the typical problem

    the fans pull 1000cfm each, i figure that with a new radiator that's plenty of cooling. anyone care to chime in on this? my buddy has a 306 that runs them on a stock radiator and it cools it so i hope i didnt waste my money lol here is the fan statistics i got a new shroud and two of these...
  4. bdazzgt

    Hate it or Love it .. 89 Notch 421 726HP Build Thread

    honestly im not a big fan on the ford chevy-chevy ford swaps but as i get older i realize that i like anything that doesn't sound like a pissed off blender going down the road. props on the custom build man i wish i had the room for something like that
  5. bdazzgt

    Help with my overheating problem, not the typical problem

    That is what i figured, not only is the radiator not big enough but its at the threshold, now just keeping it at 200* then you add summer coming and the use of a/c, it will be too much especially since i have a 180* thermostat. I just bought this 1986-93 Mustang 5.0L Complete Aluminum Radiator...
  6. bdazzgt

    Will this electric fan cool my motor?

    I was digging through my uncles shed and i found this electric fan, i dont know how many cfm's it will pull but i was wondering if it is capable for cooling my motor. the Part number is F8C6-8C607 it looks like its off a mercury tracer/ford escort.
  7. bdazzgt

    Best HCI combo NA?

    I love my TF TW upper engine kit, i bought a comp 270xe cam and it runs great lots of low end torque, then around 3k they really wake up. couldnt be happier
  8. bdazzgt

    Your project cost?

    The current car counting motor was 1900 then 1600 for h/c/i/ gears injectors, then 800 for the last few new parts i bought. then you consider labor/blood/sweat/ i have way too much. i can say though im the only nurse at work with grease in my nails but gotta support my habit
  9. bdazzgt

    What did you do for your Fox today?

    i watched mine overheat on the way home, then i kicked the fender extension and parked it in the garage
  10. bdazzgt

    Post your favorite pic of your car.

    this is the car after i painted it, it looks ok for my first paint job. everyone says im too critical.
  11. bdazzgt

    Help with my overheating problem, not the typical problem

    its just a stock 90 5.0 radiator, i had it cleaned a few years ago but im not investing any more money in it
  12. bdazzgt

    Help with my overheating problem, not the typical problem

    Im just worried about having the radiator boiled/cleaned out and it still not being able to cool the new motor since its a little more beefy, i just don't know how capable the stock radiator is on cooling a hopped up motor
  13. bdazzgt

    Help with my overheating problem, not the typical problem

    air dam is installed, never had the problem before, but then again it was a completely stock motor before also. the only change in the cooling system is i went from a 190* oem thermostat to a 180* mr gasket
  14. bdazzgt

    Help with my overheating problem, not the typical problem

    hey, well i got my car lined out so i thought, i put a new Trickflow twisted wedge h/c/i new pistons, on the car. I got the idle lined out and the starter fixed so i'm driving the car through all over town it runs around 180-190* and runs great. About 10 minutes of highway driving the temp...
  15. bdazzgt

    what psi do you set your fuel pressure to?

    it has trickflow twisted wedge heads, street heat intake, comp 270xe cam, 10:1 compression,24lb injectors, 76mm mass air meter, 190lph fuel pump, 1.6 roller rockers. the reason i replace it is because i thought my old one was bad initially and the car could just just a bit more fuel at idle...
  16. bdazzgt

    what psi do you set your fuel pressure to?

    rick is that normal for a modified car?
  17. bdazzgt

    what psi do you set your fuel pressure to?

    i just put an adjustable fuel pressure regulator on the stang, the paper said stock psi was 44 so i set mine to 48 is this too much pressure? the car seems to run better and idles a whole lot better.i just want to make sure im not going to run pig rich and stuff? thanks guys
  18. bdazzgt

    Why do I keep going through starters?

    so would i be better off switching to a 92+ starter?
  19. bdazzgt

    Why do I keep going through starters?

    The starter wiring is prob 2 years old i replace all wiring for the alternator, starter and battery cables and ground with new 2g wiring, the battery is a new one and is in the engine compartment. I am running the big SOB lol the standard fit for a 90 gt i guess:shrug:. any ideas are appreciated
  20. bdazzgt

    Why do I keep going through starters?

    well last friday the 29th i put starter number 5 on my car, i do admit they are the new orielly's starters for the car but it seems that i constantly have to replace them, last time i broke down and bought a heat shield this starter lasted until yesterday. They start to drag slowly then wont...
Top Bottom
Back
Forums
Menu