Search results

  1. D

    spec vs. Centerforce

    Not to be rude but do a search on this site. When I was looking at replacing my clutch I found a wealth of info on these clutches by doing a search and ALOT of reading. I ended up going with a Spec 2.
  2. D

    rear abs sensors damaged when doing gears??

    just like 67coupe said very common problem when doing gears. And those sensors aren't cheap either.
  3. D

    Info on Rear wheel bearing

    Yeah , you'll have to remove the diff cover and the carrier shaft retainer bolt, then the shaft itself. Reomve brake assembly and rotor. Now you have top remove the abs sensors. After you get the retainer bolt out. Take some channel lock pliers and carefully wiggle the sensor back and forth...
  4. D

    Got my VIN and build date

    Depending what kind of person you are, the excitment must be unbearable. I know how excited I get just waiting for new parts to arrive, nevermind a new STANG!:nice:
  5. D

    Richmond Excel 3:55 Gear Install Questions

    Quick answer, No, they are for FMS gears only. All of your questions will be answered at 8.8 Axle Gear Install Did anyone mention you should install 4.10's JK:rlaugh:
  6. D

    Tint

    ^^ Exacly what I was thinking. Not every vehicle seals perfectly and water can get onto the inside and run down the inside of the window. Normal washing wouldn't do it, but not everyone is normal:D
  7. D

    Richmond Excel 3:55 Gear Install Questions

    A dial indicator is not a dial caliper. If you have .008-.014 backlash then it's good. As far as the paint markings they look good. The first test drive will tell the tale. good luck.
  8. D

    Why was this cut?

    That's good you found the problem and that you posted your find and fix. What or who would have cut this? I mean was it in your garage or a garage you work at? Two batteries that's not cheap.
  9. D

    Richmond Excel 3:55 Gear Install Questions

    Anywhere from .008 to .014 is acceptable, but like was already said .010 is near perfect. You do have a dial indicator right?
  10. D

    new pics with new look

    Car looks good, but I would put something where the grill was. With nothing there it looks like it got smashed out and you never replaced it.
  11. D

    Do I have everything I need for my gear install?

    Are you doing it yourself? All it takes is time and patience don't be in a big hurry to get it done, take your time measuring, and tightening everything. That 'S' spring for the traction lock is a bugger, I compressed it in my vise then tightened a hose gear clamp around it. It then went in...
  12. D

    new clutch and fly wheel

    Hey Suzukikid, Your best bet is to do a search on this forum as far as replacing your clutch goes. The best flywheel and clutch setup depends totally on who you are asking and what their preference or experience is. I just installed a spec billett flywheel and a spec stage 2 clutch set-up...
  13. D

    Ever seen a Convertible/T-top 82 stang?

    Honestly, what is wrong with people?
  14. D

    Where does the jack go?

    Thanks boys that is the exact info I needed.:nice:
  15. D

    Where does the jack go?

    Hey everyone, Since i bought my car last year, the jack for changing the spare has been just floating around in my trunk. I have tried to see where it secures to but haven't been able to find where. I would have looked in the owners manual but it didn't come with the car:rolleyes:. Could...
  16. D

    Is He Missing Anything?

    Depending how many miles are on the car and how it looks, I replaced my pivot stud and release lever also the clutch cable. For the amount of money these things cost I think it is worth it. Also don't forget to put some high temp grease on the TOB shaft and a little on the face of the TOB...
  17. D

    Please help turn signal fuse keeps blowing

    From what I can tell the fuse only controls the turn signals or flashers. You obviously have a short to ground. The problem is at the switch or the flasher. Make sure your turn signal and hazards are turned off before you try another fuse. Check wiring under the dash for any wires that might...
  18. D

    Toyota recalls - People are STUPID

    All the car companies have had their share of bad press, recalls, defects, etc. It's just Toyotas turn for a while. Next month it will be something else, at some other companies expense....God be with the families affected by this issue.
  19. D

    More pic whoring.. sorry!

    don't be sorry, always love pics, that's a nice one.
  20. D

    Bad Luck

    Glad to hear everything ended good for you. So many times all you hear about are all of the rip offs out there. Good to see a company out there who still has "customer service":nice:.
Top Bottom
Back
Forums
Menu