Search results

  1. I

    NEED SOME EXPLANATION ON WHEEL OFFSET AND BACKSPACING

    I THINK I RAN A 4.5 REAR BS AND A 3.5 FRONT BS TO GET 16X8 WHELS AND TA KDWS TO FIT WITH NO FENDER ROLLING AND NO TIRE RUB IN REAR EVEN WITH PASSENGERS IN BACK . SHREDDING TIRES --SUX LOL 245-50 REARS 225-50 FRONT
  2. I

    Insurance

    Yes was same for me 5k thats how they keep the costs down lower miles lower risk. they assume you are weekend cruising and shows etc.they have to do it that way to make any money. if you have a daily driver your better off finding a regular policy.
  3. I

    Insurance

    CHRISTINE Here she is hope picture went thru?
  4. I

    Insurance

    Hi all been a year or so since i been here. anyway. i restored a 68 mustang fully drove it 2700 miles then was rear ended. my car was in paint again for nearly a year,so we dropped the insurance. now it is finally done and in storage and covered again but i cant remeber what the issues were...
  5. I

    1967 Rear Window Trim??

    I Just Reid My 68 But If I Remeber Right They Make Em All Except The Lower Piece Which I Had To Restraighten . If U Use Hard Wod Blocks And A Hammer And Maybe A Punch To Work The Blocks Into The Tight Areas U Can Reshape Em Pretty Good. Then A Trip To The Polishing Whell With Some Rouge And Ur...
  6. I

    Upper A -arms

    Cool Ill Try That H.p Thx Lots . Have A Good One !
  7. I

    Upper A -arms

    Hi Everyone I Am Running Grab A Trac Front A- Arms (polyurethane )anyway I Have Not Been Able To Grease Them Since I Installed Them Grease Shoots Out Of Everything But The Bushings. Is Mt Only Option To Drill Holes In Shock Towers And Put Straight Grease Fittings On Them ? Or Can I Get A Kit...
  8. I

    how can i lock my hood shut?

    Hows About Installing A Rectangle Steel Piece To An Actuator. And Lacthing It From Interior Mounted Swith Electrically And Cutting An Opening In Hood Pice That Mathches The Actutaor Pads Shape?
  9. I

    Engine Questions/new Block

    Hello All I Am Going To Get A Dart 4 Bolt Main Block To Build A Stroker Engine And Supercharge It. 1st Question Does The Block Come Ready To Build --not Need To Be Bored?2nd Question If It Doesnt Need To Be Bored Which Im Assuming A New Block Doesnt. Then U Arent Actually Building A 347 Or 331...
  10. I

    Front and rear window questions

    I Used A Angled Heavy Putty Knife To Pryem Out They Can Be In Their Real Hard .slip It In Slide It Over Till U Hit A Clip Then Pop Em Out . . Going Back In I Used A Flat Screwdriver To Press Em In With A Sharp Tap At Each Pin. Hope That Helps .
  11. I

    Block Search--302

    What Is Your Opinion On The Stroke Keep The Angles Minimal At 331 Or Go For The 347?that Is My Worry If The Extra Wall Loads And Rod Angles Will Come Back To Haunt Me Lol. And Thx All For Advice --fimnally Gettin Somewhere8^)
  12. I

    Block Search--302

    I Am Not A Ford Man By Any Means Have Had Chevy All My Life Till Now. Thus All The Questions I Know The Chevy Info Lol Four Bolyts Are A Dime A Dozen Hehe. Anyway I Looking For 550 To 600 Hp Stroke Of 331 Or 347 . All Parts Will Be Forged .the Power Will Come From A Paxton Enclosed...
  13. I

    As promised- MOTOR pics of my 66 fastback restomod- w/ supercharged 5.0

    Sweeeeeeeeeeeeeeet! N Neat. Good Job
  14. I

    Pics of Procar/Scat seats in a stang

    I Love Mine But Have A Hard Time Getting In Em .with A Small Grant Steering, Wheel Seats All Back ,and At Lowest Setting .i Have To Work Over Side Bolster . I Am 5 10 170 Lbs So Im Small .i Guess That Why They Put In Removable Steering Wheels In Race Cars Tho Huh Hehehe.i Just Posted Pics Of...
  15. I

    Block Search--302

    Hey Tom Is Your S/c A Pressurized Or Are U Running A F.i Motor?i Will Be Running A 331 Or 347 Stroke And The Enclosed Paxton. I Need Help If U Got Answers For Me Lol . Please!!!!!!!!!
  16. I

    Block Search--302

    Hi All Its Now Time To Start My Engine Buyild . Firt Item Ill Be Needing Is A Four Bolt 302 Block. If You Know Of Any Can U Please List A Name Of Company Or A Url Please . Thanks In Advance !!
  17. I

    Reproduction Fenders - Mustangs Unlimited

    During My Repaint I Came Up With This Info . As Of Right Now Only One Place Makes Every Fender U See Anywhere And They Are All Chinese Made. I Have A 68 And Was Able To Get The Rear Quarters With The Marker Indents After 2 Orders But The Fake Air Inlet Part For Rear Brakes Was Wrong. And It Was...
  18. I

    Electrical Nightmare

    well thats a good question what was the problem i never found any but created some when i started cutting out un-used plugs. after i was done everything worked it just worked at the wrong time hehehe. i had the reverse lights hooked to the rear tail lights and i had cut the front turn signal...
  19. I

    Electrical Nightmare

    Finally Got It All Working. Lol A Friend Came Over N After Trial And Error Found All Problems And Im Now Dring Her Again Yipeeee. Thx For All Advice Tho Everyone .
  20. I

    paint pic=done

    1 Last Angle
Top Bottom
Back
Forums
Menu