Search results

  1. I

    Cable Clutch

    I Used A Piece Of That Spiral Aluminum Wire Conduit To Insulate The Cable. Its Flexible, And I Polished It To A Chrome Like Finish And Clearcoated It. I Used The 1-1/4 Inch Size. And Ran It From The Front Of The Block Where Cable Started All The Way Back To The Scattershield. I Also Put Heat...
  2. I

    driver's side window

    U Take The 3 Screws Out That Hold I To The Frame Then U Have To Take Out The Roller Piece In The Back And All The Glass Stopss. There Are Three Attached To It All The Adjusting Plates The Round Ones With Allen Head Holes Got To Come Out Too. And There Arew Screws Under That Rubber Pice On Door U...
  3. I

    Rough N Tumbly

    Its An Older Engine With Great Compression N Vaccum 170 Avg N 20 Vaccum .rebuilt Carb ,performer Manifold ,all New 2.25 Exhaust+h Pipe N Hooker Supercomps.advance Im Not Sure The Pointer Is Hidden Behind The Edelbrock Water Pump ---passenger Side Inlet--i Had The Initial At About 16 And The...
  4. I

    Rough N Tumbly

    I Just Got My 302 Running And It Seems To Load Up I Am Running An Edelbrock 600 . I Am Using The Third Heaviest Springs In It . And I Am Running A Billet Msd With The 25 Degree Adavnace Stop And Second Fastest Advance Rate Springs In It. The 302 Is Stock Internally And An 85yr. Any Suggestions...
  5. I

    Anyone Looking for a Rare 1967 Mustang?

    Run Forrest Run!!!!
  6. I

    Anyone Looking for a Rare 1967 Mustang?

    Medic, Medic ,someone Get A Medic Over Here!!!!!!
  7. I

    Speedo

    Thx Dh Im Terrible At Maff But Ill Try :)
  8. I

    Speedo

    What Is The Proper Speedo Gear To Run With A T-5 .3.55 Gear Ratio/p 2.45/50 R 16 Tires.also Does It Use The Auto Gear Or The Toploader Gear?or A Special T-5 Only Gear?.
  9. I

    help 95 5.0 engine, do i need a different oil pan

    You Need To Get A Front Sump Oil Pan .different Dipstick.and Make Sure You Have The Timimg Cover Which Has Hole For The Dipstick In Front . If It Is Not There You Got To Drill It Out With A 3/8 Bit . It Will Have A Flat Spot On The Passenger Side Which Is A Round Area That Is Where The Dipstick...
  10. I

    Headlights

    Kewl Now Thats Some Infos I Can Use. Thank You All !!!!
  11. I

    Headlights

    Yeah Lol That Would Help. I Dont Know What An Hid Is Either .i Know U Can Get Replacement Bulbs But. I Am Looking For A Brand Name Of Lens And Where To Buy Would Help Also I See Tri Bars Which Im Assuming Are All For Looks N Not Performance .and Some Xenon Things. If I Could Get Brand Names Of...
  12. I

    Headlights

    What Are The Brightest Long Reaching Headlights Available For Classics That Are Street Legal ?.the Originals Just Dont Cut It Hate Outdriving The Lights On Country Roads With Animals On The Prowl.
  13. I

    Can't maintain 175 psi in cylinder

    Wow Looks Like I Lucked Ot Then My Temp Motor A 302 .i Just Put In From A 85 Merc Cougar ,tested At 165 Lowest And A Flyer At 185. Avg 170and It Had A Few Hours On It. Got It For A Hundred Bucks ---the Whole Frickin Car Lol .it Did Run Like Crap When I First Put It In Tho.and That Stumped Me...
View older results
Top Bottom
Back
Forums
Menu