Search results

  1. FastGT94

    makeing some money

    Good deal, thanks!! All I've managed on stock 16" tires is a 13.1 @ 107. Any Rear End upgrades done at all? (aside from gears I mean) Ya know, could you PM me? We shouldn't really be talkin on this thread since we keep bumpin it up :bang: :bang: my bad
  2. FastGT94

    makeing some money

    stangfreak, were you using drag radials on that run?
  3. FastGT94

    makeing some money

    Send all your money to me.. Bye bye spammer.... :bang: :lock:
  4. FastGT94

    Stock car + cobra intake = total loss of low end ??

    Also a good idea, it seems like a pain but its worth a day or two of wrenchin to have a drivable car.
  5. FastGT94

    Stock car + cobra intake = total loss of low end ??

    If the timing has been verified, then the distributor is fine. The tooth off thing is just another way of saying to double check the timing. If he didn't remove the distributor during the install, it may have made it more difficult to line up the intake and gaskets w/o shifting a gasket...
  6. FastGT94

    Stock car + cobra intake = total loss of low end ??

    Ok, You made sure to put a gasket on each side of the intake spacer right? Did you reinstall all the stock electronics on the new TB? All new gaskets too? Did you verify the TPS voltage? (Essential on pre 1994 cars). Is the 70mm C&L made for 19# injectors or 24# injectors? That can...
  7. FastGT94

    O2 Sensors, Which to get???

    Walker, Denso or Ford? The Denso ones have more holes in them which (I'd think) would give more accurate reading due to more of the exhaust gas being sampled. But I don't know how good they are compared to Ford OEM. Please help me choose...
  8. FastGT94

    5.0 cam install

    Oh and BTW, you can actually change the cam with the intake on. Will take some extra tools but it can be done. I agree with waiting till you can do the whole package as a whole though.
  9. FastGT94

    5.0 cam install

    I have a similar setup as him. Here's a clip with open headers... http://www.mustangworks.com/cgi-bin/moi-display.cgi?3451
  10. FastGT94

    Stock car + cobra intake = total loss of low end ??

    Check timing and injectors. All else fails look for a vacuum leak.
  11. FastGT94

    Good Street / Strip Springs?

    That was my thought exactly. With the adjustable strange shocks / struts (10 way) I could stiffen up the front a bunch when daily driving to balance it out and adjust it once at the track for the launch. I guess I really won't know for sure unless I try right lol. Thanks!
  12. FastGT94

    Good Street / Strip Springs?

    Also, anyone have experience with the Strange Adjustable shocks / struts? I talked with a rep and they are supposed to be adjustable as far as near 80/20 but yet have good street performance as well.
  13. FastGT94

    Good Street / Strip Springs?

    No problem, since I'm looking for the best of both worlds (near stock handling and good launch), I'll probably give those eibach's a shot. Thanks to all for the advice!
  14. FastGT94

    Good Street / Strip Springs?

    Ah, sounds good thanks for that. Should I use the Eibachs for the back as well too?
  15. FastGT94

    Good Street / Strip Springs?

    But are the eibach's good for the street? Don't those make the car's ride height like a truck? I've heard things about the 4 cylinder springs, I may have to look into that. I'm confused about one thing though. I thought you want a higher spring rate up front to help with the lift...
  16. FastGT94

    Good Street / Strip Springs?

    I may be fixing up my suspension this winter and wanted to know what a good street / strip spring is for our cars? I'm going to go with Strange 10 way adjustable front struts and rear shocks and need a spring to go with them. I'd like something close to stock handling but yet good weight...
  17. FastGT94

    Vibration is still there!!! Please help me before I give up and sell the car!

    The rolling vibration is gone, aluminum DS solved it!!! I'm having the balance checked on the flywheel tonight and I'll report back with the findings!
  18. FastGT94

    Trans makes bad squealing type noise after cruising at 75-80mph for extended periods.

    I replaced it once already but intend to again since I'm in there.
  19. FastGT94

    Trans makes bad squealing type noise after cruising at 75-80mph for extended periods.

    Sorry I also have a new aluminum driveshaft so its not the U-Joints. That is, if you were referring to me. :D I'm begining to suspect the trans as well but any particular part to start looking at or just bearings in general?
  20. FastGT94

    Trans makes bad squealing type noise after cruising at 75-80mph for extended periods.

    I don't think its the TOB since its brand new and this noise happened before on the old one (110,000 miles). I've recently replaced: -Bearing Retainer -Throwout bearing -Pilot Bearing -Clutch -Pressure Plate -Driveshaft All are new and are functioning fine as far as I can tell.
Top Bottom
Back
Forums
Menu