Search results

  1. Pbum5

    ET Streets Drag Radials....WoW

    what is the wear like on those?
  2. Pbum5

    help me work out glitches in my new 306

    make sure all of you vacum lines are pluugged or conected on the carb.
  3. Pbum5

    Run-on; Engine doesn't shut off

    Check your timming. It might be to far advanced. You also might have a just have a bad tank of gas.
  4. Pbum5

    What is my clutch size?

    If anyone is interested I am selling a New Hays Billet SFI Steel Flywheel. I was going to do a tranny sway this summer but decided to put it on hold. It is listed in the classified section.
  5. Pbum5

    Turbo Classic Track Times.

    How about some dyno #'s of that motor?
  6. Pbum5

    14x7's and 67 coupe -- best tire size?

    I have Cragar 14x7 wheels with BFG Radial TA’s 215/60 in the front and 265/50 in the back. They did rub but I went with a narrower 1959, 9" inch rear it took care of that. Now when I upgrade to a bigger wheel can run a larger tire with the right backspacing I would say 245/60 would be a good...
  7. Pbum5

    Something about the interior i never knew...

    after you clean off any suface rust and other junk wipe it down with laquer thinner and run a tack cloth over it before spraying.
  8. Pbum5

    FOR SALE – NEW HAYS BILLET STEEL FLYWHEEL

    A new Ford 289, 302, 351W - Hays Steel Flywheel SFI 1.1 approved 157 teeth, External 28 oz. Balance – 11” Part # HAY-12-535 Summit Racing sells it for $279.88 You can have this one shipped to your door in the US 48 for $ 225.00
  9. Pbum5

    1967 Hood.

    Still Available. Email me for pics.
  10. Pbum5

    Replacing rear springs

    I like my Maier Racing 165 Leafs. I think it is the perfect drop for the rear. I also went with the Heavy Duty Shackles and Poly Bushings
  11. Pbum5

    Mallory Unitlite Distributor - Can it be worked on?

    They should come with a little plastic Key that you use to change the advance rates. That is what mine has, but I have had it for 15 years. The new ones may be different.
  12. Pbum5

    Bolt in or weld in?

    I have CE Bolt In Connectors. They are bolted and welded in. They are the best bang for buck when it comes to sub frame connectors. They also have great clearance.
  13. Pbum5

    [Pics] Smooth Firewall

    Looking good. where in MN are you located?
  14. Pbum5

    Tremec 3550/TKO and Lakewood Bellhousing

    Yup got that covered. My new flywheel is a 28oz.
  15. Pbum5

    Tremec 3550/TKO and Lakewood Bellhousing

    Just wondering if the newer style Bellhousing is the way to go with a Tremec 3550/TKO Swap. I was thinking of going with the Lakewood Scattreshield part # 15202 It is listed for 79-95 Fords. Will it work on 67 289 with no problems. I just bough a Hays Steel 157 tooth flywheel...
  16. Pbum5

    Shoulder Belt Conversion

    Could you just post the write up on this thread with pics if you have them.
  17. Pbum5

    What is my clutch size?

    Lonn - if it turn out I need a 10” clutch I’ll PM for the CF kit. Fastback – yeah no telling what’s under there after all this time. I plan on swapping out the flywheel for a Steel one from Hays. I guess that would also change the clutch size? If it can accept different sizes is it better...
  18. Pbum5

    What is my clutch size?

    Have a 67 289 with a toploader 4-speed. Just wondering what size clutch I have. I think it’s a stock type and I am looking to upgrade when I do a 5 speed swap. I plan on keeping the original bellhousing and clutch setup. Just want to know if it’s a 10” or 10 1/2”. Do I have to stick with that...
  19. Pbum5

    T5 5 Speed, Where did you get yours?

    Thanks for the replies. 66Runt. If my current 3.25’s are to steep after the swap I can always trade them out. Realmongo- thanks for the link. Fairlane. I think I found a local guy he rebuilds them at a reasonable cost. Sicarius428. I think I would rather spend a little more now on the...
  20. Pbum5

    T5 5 Speed, Where did you get yours?

    My car is a street ride. No open track stuff for me. So a good overdrive gear would suit me well.
Top Bottom
Back
Forums
Menu