Search results

  1. 0

    Just Picked up an 03 Cobra.. What should i do to it?

    Pro charger http://www.apten-us.com/performance/03cobra/procharger.asp Thats on pump gas. I know a company that will sell and do the complete install for 3,500 and its in stock.
  2. 0

    1/8 mile times....

    Slicks Slicks should take .2 off your '60 and get you in the 8s. See if you shift just before the trap. Also, a 26 inch ET street is taller than a stock tire,it will allow you more speed before your car needs to shift into the next gear. This was an issue with my car in the 1/4 mile...
  3. 0

    Rubber intake for flowmasters

    Anyone???
  4. 0

    Power Estimates on new setup:

    Woa Hold on, dont get upset when you put it on the dyno. You should expect to gain between 40 to 60 rwhp. On a"mustang dyno" it will be between 30 and 50rwhp. If your over 280 at the rear it was money well spent!!!
  5. 0

    Rubber intake for flowmasters

    Where can I find the stock rubber intake for my mustang; you know the large rubber hose that goes from the throttle body to the mass air meter. My stock one has a hole in it from the nitrous spray nozzle. I would like to have a backup. I would be willing to give up a pair of used 40 series...
  6. 0

    White powdery substance/puddle...what is it?

    You can say no to a double dog dare, but not to a triple dog dare. Sorry you got to do it!!! If it tastes like salt, your ok. If your tongue starts to bleed, its battery acid. If you pawn your car to get more of it , then its crack.
  7. 0

    Brake best

    I purchased 2 pair of "Brake Best" pads from Oreillys Auto parts. One for the mustang and the other for our expedition. I turned the rotors used brake quiet and greased the slide pins. Both cars squeek like crazy. I have done lots of brakes and have been able to stop squeeks in the past...
  8. 0

    White powdery substance/puddle...what is it?

    powder Put your tongue to it..... I triple dog dare ya!!!
  9. 0

    went to the track this past sat.

    Gears and slicks Gears and slicks will get you to low 14 or a very high 13
  10. 0

    My First Mod

    void
  11. 0

    My First Mod

    HUMMMM? HUMMMM What to get? I can think of 150 things, most of them in a NX bottle!!!
  12. 0

    Spintech

    packs I changed out my packs for flowmasters because the packs kept popping like a truck. The spintech mufflers fit great on the magnaflow catback system. Its getting a richer sound now after a few days of driving.
  13. 0

    Spintech

    opening up My spintech mufflers are starting to open up a little more today. They seem to be getting louder . I'm starting to get more of the raspyness I wanted. I'm very pleased with the sound. People are starting to look around. How is the best way to recort a sound clip?
  14. 0

    Car idling funky... :(

    change pipe I would change back to the old pipe and see if you still have the problem. I have a feeling it will still act up with the old pipe; somthing may have gotten moved or is not connected right. Start there! If it runs fine with the old pipe then you know what the problem is!
  15. 0

    Spintech

    Put the spintech pros on today. They are kinda of tame with my x-pipe and cats. Great sound but would sound better without the cats. I was hoping for a litle more raspy sound at low RPMS. Deep rumble like flowmasters at low rpms. Sounds great after 2000rpms more like borlas or bassani.
  16. 0

    Synthetic Oil

    Cost Buy the most expensive oil you can find. Its the best!!!
  17. 0

    Installing gears myself this weekend.

    Dont fool yourself. I know guys who do this for a living and they pray after each install that it wont wine. If you need a manual to do the install, your might re-consider. Its more of a "feel" rather than a process.
  18. 0

    Running Lean, will I hurt numbers by fattening my A/F out?

    lean Bro your not lean for a NA car. Your number are fine; even the 15.5. Your times are better with a lean condition. Yes 12.2 is to lean for a blown or sprayed car. The extra fuel is used to keep the cylinder temps down because it difficult to retard the timimg.
  19. 0

    Major Track issues

    Your choice Are you holding it back with the brake at 1700rpm??? or are you simply hitting the gas. Your time is about right with your mods, you could dump .2 off your 60' with gears. That would put you at low 14. Gears will stop the bog. Your gears a too long, hence...
  20. 0

    Hawk Pads. SQUEAKING?

    noise The reason brake pads make noise is vibration. Here is the cure for brake pad noise. 1. Have the disks turned or sand them 2. Remove the glossy paint from the sides of the pads(sand or grind) 3.***Grease(thick and heavy) the two adjustment pins on each calliper and slide them...
Top Bottom
Back
Forums
Menu