Search results

  1. Mustangless

    stock log

    Does anyone have a log file with spark, rpm, mph, and load? the reason I am looking for this is trying to get a good idea of spark. I looked at a log from I was stock and was hitting 49, but did not log load. I only see 43 now, and I am running 93 vs 87 back then
  2. Mustangless

    Problems w/ the Neighbor

    open headers at 2:00am :rlaugh: According to Decibel (Loudness) Comparison Chart City traffic inside car is 85db
  3. Mustangless

    Vortech kits on sale!!!!

    4FG218-020S is around 200 cheaper at summit
  4. Mustangless

    high idle

    I was having a high idle problem, and found out my iac did not work. Got it replaced and I still have a idle problem. When the car is not in gear, it is idling around 1100. When I put it in gear, it will go down to 900. I don't think I have an vacuum leaks. The iac was working when it was...
  5. Mustangless

    How Did You Mount Your Rear Seat Delete

    How is your bottom part held in? My bottom part has a big gap in the middle where it does not go flat on the carpet. This is because on the outsides wires under the carpet raise it up.
  6. Mustangless

    How Did You Mount Your Rear Seat Delete

    I have mine mostly finished, but the bottom part is not in good. I have the back of the bottom part with velcro on it. I was going to velcro the front part to the car's carpet, but the velcro does not stick to the carpet. This might help you 1999-2004 Hardtop Mustangs Seat Delete-...
  7. Mustangless

    what is this

    I borrowed this picture from somebody on corral.net That red line that is just sitting there, mine is like that too. What does that go to and could that be a vacuum leak? edit: Ignore the drawings. He is having a noise he is trying to figure out.
  8. Mustangless

    Guys with widebands... what is your cruising AF ratio?

    my afr is all over the place at cruise. High 13s to mid 15s.
  9. Mustangless

    boost and pcv

    I read over that link you gave me. I am thinking about running just one breather and plugging the pcv hole on the intake. Do you know what size breather goes in to the oil fill? I was also looking for some baffles to help with the oil. All what jegs has is 1 1/4" do you have oil smell...
  10. Mustangless

    boost and pcv

    Some where on the board somebody said put a breather on the oil fill, and one on the lower intake where the pcv line goes. Then cap of the pcv. Does this sound like this will work, and what size breather is it? maybe not even a breather on the lower intake. Just plug it... Won't that work?
  11. Mustangless

    boost and pcv

    can't I just tap in right before the TB? Isn't that how the line is ran on the foxbodys?
  12. Mustangless

    Are valve cover breathers a big vacuum leak?

    I don't want to pull my VC off. I am really thinking about just running a breather on my oil fill. Could I put a breather on my lower intake instead of the pcv valve or would that still be a leak?
  13. Mustangless

    So the RSD got a makeover today!

    What is holding up the back of the bottom part? What are those black tab things on the front of the bottom part?
  14. Mustangless

    New Best in the 331....

    what rpm are you crossing the line at and what size tires do you have?
  15. Mustangless

    boost and pcv

    I found this on svtperformance i i took my V.C. breather and installed a toyota supra (metal) pcv vlave upside down, inside it - so that when the engine is at cruise the vlave is sucked shut, so theres no vacum leak. however IF the crankcase gets boosted/pressurized then the valve unseats and...
  16. Mustangless

    boost and pcv

    I don't want anything but clean air coming through my turbo. I have been told there will be oil residue(sp) and gasses that will come through. That would get on my maf sensor and it would have to be cleaned. The breathers sound good, except I don't want to cut up my other valve cover.
  17. Mustangless

    boost and pcv

    I was thinking about using this setup but, I don't want the line running from the oil cap to the "inlet side of the blower". I am using a blow through setup, so whatever gets pass the oil separator would get on my maf. I thought about using a breather on the VC, but then I would have a...
  18. Mustangless

    sweet rear seat and rims

    where did you get the carpet and what is holding the bottom part up?
  19. Mustangless

    Anybody seen/have these wheels?

    That wheel looks the same as the American racing rebel. 94gtlaserrc has those wheels
  20. Mustangless

    Black interior.....how common?

    I have all black with leather. I think I might have seen an all black with cloth GTS :shrug: maybe not http://www.motortopia.com/album/view/p/cars/t/vehicle/v/859/a/1129/i/interior_and_trunk/po/0/pl/1
Top Bottom
Back
Forums
Menu