Search results

  1. 5.02GO

    Blower cam

    :OT: Myke86GT, what size injectors are you running? I am thinking about purchasing a 347. I am running 30's right now. I think that i will need to upgrade to 42's. I have been reading about the tweecer and pms but dont really want to get involved in messing with the computer. thanks......
  2. 5.02GO

    Dropping stock h-pipe from 92 auto....collector bolt size? Tips?

    I assume you still have stock headers. I believe they have the same thread as BBK, Mac and most other headers. Its been almost 10 years since i have even seen stock headers so i'm not gonna promise you this is right. I am almost positive the thread is 12mm-1.75. If/when you get new...
  3. 5.02GO

    Blower cam

    I am running an E cam with a novi at about 6-7 psi. How can you figure LSA? That is lobe seperation. Right? E cam = 220/220* , .498/.498 lift @.50 F cam = 226/226* , .512/.512 lift @.50 I'm not sure if i can run an F cam. Too much lift? Going by what was said about lower...
  4. 5.02GO

    Blower cam

    Alright, how bout this..... What the hell makes a "blower cam" a blower cam ? I am getting ready for a stroker, i need to figure what cam i need.
  5. 5.02GO

    So who has went from shorties to longtubes? What gains did you see? dyno? track?

    If figured the sound of your exhaust would be alot louder. I have an E cam in mine now. I can hardly hear the cam. Of corse, i am running a stock h pipe with bbk ceramic shortys. This i believe is covering up my cam. Hopefully going with longtubes and two cats will allow the cam to be heard.
  6. 5.02GO

    So who has went from shorties to longtubes? What gains did you see? dyno? track?

    actually, i am wondering if my motor might run slightly cooler when i take two of the cats....
  7. 5.02GO

    Anyone sorry they bought a tweecer? Lots of head-banging going on..

    Why can't things be simple? :bang: I defenitely appreciate your information. Thank you!
  8. 5.02GO

    Cooling parts questions........Come on in!

    thank you...
  9. 5.02GO

    So who has went from shorties to longtubes? What gains did you see? dyno? track?

    Well this similar but yet maybe not. I had some shortys once and i added an off road h-pipe with NO cats. Honestly i felt like the car ran like crap. Not to mention sounded like ole farm truck that drives up and down the road where i live. Needless to say, the pipe came off and i sold it...
  10. 5.02GO

    Cooling parts questions........Come on in!

    Thanks for all the help hissin...I appreciate it! :nice: Also i was thinking about the "factory temp gauge not being accurate" theory, so i started looking thru my summit book. I may install a 2 pod gage cage in the AC vents. May put a temp gauge there and maybe a fuel pressure gage beside...
  11. 5.02GO

    Anyone sorry they bought a tweecer? Lots of head-banging going on..

    So what your sayin is that i would be gambling if i got some 42's and no tweecer or pms.......Right? Maybe would have problems............Maybe not.......Right? Reguarding the comment about the 24's, i have 30's now and havent had any start or run problems that i can remember. Maybe i can...
  12. 5.02GO

    Cooling parts questions........Come on in!

    "Police Service" fan clutch installed........ "Mr. Gasket" 180* installed....... COOLING STATUS: Much better. The gauge barely moves up at idle. When i start down the road it drops. Temperature is much more consistant now. Oh, i can actually hear my fan now. Almost forgot what it...
  13. 5.02GO

    Anyone sorry they bought a tweecer? Lots of head-banging going on..

    So with the twEECer, you actually write YOUR OWN program then and write it to the EEPROM? Umm, what happens if you need the STOCK or FACTORY settings again? I am wanting 42lb injectors and i have read that i may have to have a twEEcer or that PMS thing. Is that true? Is there a way to...
  14. 5.02GO

    bent cam???

    Doubt its bent. I am sure they are made from hardend steel. Chipped maybe.
  15. 5.02GO

    Cooling parts questions........Come on in!

    I heard of that block tester. That could come in handy. Heard it was like $50. I have heard of other members drilling a hole or two into there thermostat. Should i do this? Thanks again.......
  16. 5.02GO

    Cooling parts questions........Come on in!

    Dont worry bout that. I know of people saying the stock gauge being inaccurate. And perhaps it is, but i have had this car with the same motor for 10 years. 7 of those 10 years i have ran a supercharger. I know when i look at that gauge if the motor is cooling properly or not. I am just...
  17. 5.02GO

    Engine running like crap...pulled codes.

    I am guessing about the 31o. But i think it is the canister that the fumes from the gas tank go to and recirculate it back thru the intake. Just a guess though. 41c - Your car is running lean for some reason. I dont know your mods or motor but check injectors, fuel filter, regulator. The...
  18. 5.02GO

    Cooling parts questions........Come on in!

    Actually, my motor does run hotter while driving. It runs midway and goes further occasionally. That motor NEVER ran that hot. I mean NEVER. It starts climbing at idle. And climbs quick. I hate the smell of antifreeze. I hate the look of antifreeze. I hate getting antifreeze on...
  19. 5.02GO

    Cooling parts questions........Come on in!

    I may consider a radiator. It depends on what happens with the fan clutch. I purchased that radiator a few months ago. It is an autozone junker but i just cant see it not doing the job. I dont think there is much blockage on the coils. The car just doesnt get driven much. However, i am...
  20. 5.02GO

    Cooling parts questions........Come on in!

    Thanks for chiming in again....... Well.......I bit the bullit this morning and ordered a "police service" from mustangs unlimited. I read alot of complaints about "noise" coming from some off/brands. I finally read some information about the block tester. You take a sample from your...
Top Bottom
Back
Forums
Menu