Search results

  1. 6

    67 Convertible Vin #??

    on the top of the front fender on the drivers side, the buck tag (if you have one screwed into the same fender), and the build sheet (also if you have one). I found mine taped to the wire harness next to the steering column
  2. 6

    new intake, cam, and carb?

    will these valve springs wook well http://store.summitracing.com/default.asp?target=partdetail.asp&autofilter=1&Ntt=99839%2D16&N=0&part=CRN%2D99839%2D16&autoview=sku&Ntk=KeywordSearch ? And what are your opinions on this carb...
  3. 6

    new intake, cam, and carb?

    thats good to hear because the edelbrocks are another $200 less hahaha. I like to save money. with this set up can I expect worse gas mileage or will it be about the same. I get 9 or so mpg cruising around. And 6 or 7 when I have more fun. and an estimate of HP and TQ gains
  4. 6

    new intake, cam, and carb?

    Yeah i know... the originals are a lot more. How much better is it then the edelbrock? Is it worth the extra $215+? so I should be good with the edelbrock preformer rpm intake and the crane cams energizer 272 cam, and a 750cfm carb? is there much diffrence between a edelbrock750 and a...
  5. 6

    new intake, cam, and carb?

    I saw 400 for something. oh well I dont think the rest of the engine will handle 6k the tach only goes to 6k so my guess is that redline is 5,000 or so.
  6. 6

    new intake, cam, and carb?

    D.Hearne is this the cam, http://store.summitracing.com/partdetail.asp?Ntt=Crane+cam&N=400078+4294908331+4294840105+4294925084&autoview=sku&part=CRN%2D134052&Ntk=KeywordSearch ? do you recommend upgrading the valve springs too? Also were can i find the blue thunder intake? The original 428 pi...
  7. 6

    new intake, cam, and carb?

    thank you for you reply 5.0ina66 I still dont know what I am looking for when it comes to the cam? On summit racing I only saw the XE for a chevy and it was just under $400, too much for me. It seems to be a little overwhelming. The stock lift is .481 intake and .490 exhaust, I don’t know the...
  8. 6

    new intake, cam, and carb?

    I want to upgrade the intake cam and carb on my 390 . The performer looks better on paper (with the stock heads and carb) for me then the performer rpm. I drive around 1,500rpm (3,000 on the highway) and shift between 3,000 and 3,500 RPM, the highest it has seen is 4,500. I have heard that the...
  9. 6

    Making a subwoofer cover

    HUH?? I use my back seat. I have a vert. I don’t want to ditch the 12’s, my friend and I worked hard on making that box. All I wanted was someone with some artistic ability (not me) to draw a grill that I could feasibly make and would look cool.
  10. 6

    Making a subwoofer cover

    yeah im with xxbulletsxx i dont like that idea. I was hoping for something that would look good on the box that i made, to finish it off.
  11. 6

    Making a subwoofer cover

    I dont want to put a plastic grill over the sub. Would like to make a nice looking grill/cover to put over the sub. I would like it to incorporate the mustang logo. I will use either aluminum or stainless steel.
  12. 6

    Making a subwoofer cover

    Artists welcome: I would like to make a cover for my subwoofer. If anyone has a good drawing any suggestions would be appreciated. They are 12” Thanks
  13. 6

    Stuck bolt. How do I get it loose?

    Heat can work wonders Try and heat the area around the bolt
  14. 6

    Radio for 1968 Coupe

    If you don’t have vents you could do something similar to what I did. You still have the appearance of a stock radio.
  15. 6

    two-tone Interior?

    http://www.consolecreations.com/storefront.asp?pgID=15 The turquoise one. My pics look light from the sun. I think you might have to have it done custom anyway. I dont remember ever seeing white and blue.
  16. 6

    two-tone Interior?

    I do in my 67. I get many complements about the two-tone.
  17. 6

    Car production number and value?

    I know it’s a standard convertible. But that’s not what makes it rare, it’s the options that it has. Thats what i can't find any information on.
  18. 6

    Car production number and value?

    I was wondering if anyone could tell me how many 67 390 GT convertibles with a 4 speed were made. I was looking online and could not find a number. I don’t want to pay a lot to get a number either. An estimate would be fine as well. Also, I was wondering about a rough value of the car. It is...
  19. 6

    Build sheet codes?

    I found my build sheet, and was wondering if anyone has any information on the codes. Thank you
  20. 6

    How to tune the autolite 4300 carb?

    Ok, I will try that. I don’t know what I should expect for gas mileage I though 9 or 10 miles a gallon. But it seems to be really bad right now.
Top Bottom
Back
Forums
Menu