Search results

  1. kboy262

    Louisiana, Anyone Interested in a Mustang Dyno Day??

    I am never going to see that car down here. :shrug: Anyway I was down at the dyno day for a couple of minutes. I was dropping off a cam tool for Coramprat. I got to see the 05 GT dyno. Pretty nice.
  2. kboy262

    Cam swap...what else should I do?

    I would think maybe to replace the whole motor. Are you at the airport right now?
  3. kboy262

    Cam swap...what else should I do?

    What made you decide to change the springs? I take it the mileage?
  4. kboy262

    Installing a tach in a 98 Mustang

    You do not need a tach drive in the 96-98 Mustangs. I use to have a tach in mine. All you do is pull the guage cluster out and splice into the wires. It has been so long since I did it. The source, power, and lighting can be hooked this way. I do remember that you you use the right side...
  5. kboy262

    anyone in Louisiana ?

    Kraw and I will be making it. I just hope it does not rain.
  6. kboy262

    best mod you've made?

    cams and a SCT tune by Tim at Modular Powerhouse
  7. kboy262

    PI intake adapter plates

    I have the adapter plates on my car. My main concern was that I plan on putting a blower on my car in the next few months. I want to have the best seal possible. I just cannot trust RTV sealant under some sort of boost. It just depends on what you want to do with your car.
  8. kboy262

    Installed 1-chamber flowmaster's

    Flowmaster are a chambered muffler. There is nothing in it for it to "break-in" unlike Borla, Magnaflow, and Dynomax.
  9. kboy262

    guys with cams come in.

    Cams are one of the best mods to do to these motors. It made a big difference to my slow NPI car. Install took only roughly 2 hrs with an extra set of hands and the Anderson Cam tool.
  10. kboy262

    PI Intake Swap 98 With S/C

  11. kboy262

    Installed 1-chamber flowmaster's

    I had the 1-chambers with my o/r H-pipe and lets just say I changed them out for my MAC Flowpaths 8 hrs later. It was loud and sounded very untuned. Kinda of like just running straight pipes out the back. They do not have the signature mustang sound. I like loud, but I like it to sound good...
  12. kboy262

    Flowmaster or Mac

    MAC Flowpaths all the way. Had the Flowmasters went right to the MAC Flowpaths. They sound great with a cammed motor.
  13. kboy262

    anyone in Louisiana ?

    I am going to try and make it out there.
  14. kboy262

    Gears or cams???

    I say do the gears first. I have Comp cams in mine with the stock gears and just feels like it takes forever to get into the powerband of the cams. Go for the 4.10s.
  15. kboy262

    98 GT Bottom End?

    List your mods for the NPI motor. i.e. cams, PI intake, etc. I would like to know how you are getting 335 if you are still using the stock cams and intake.
  16. kboy262

    96-98 KB Available!!!

    Yep. A couple other forums are talking about it. Just have wait and see if it is actually true.
  17. kboy262

    can anyone explain the sound of flowpaths?

    Definetly go with the MACs. I had Flowmaster, Spintechs and Bassani. The MACs have more rumble to them and also get louder the harder you are on the throttle. To me the Flowmasters seem to mellow out anything above 3500rpm. The price is great for them and never had a bit of trouble with...
  18. kboy262

    squeaky,creaky front end on my 03gt?

    Mine squeaks and it is coming from my ball-joints. Time for some new Steeda X2!
  19. kboy262

    H Pipe

    They make 4-chamber mufflers?
  20. kboy262

    spark plug change problem

    I just did mine yesterday on my 98. On one plug I had to unplug the fuel injector harness from the injector to get to the plug. I forget to plug it back in and it ran rough. Just some ideas that maybe you forgot to plug everything in. Also check to see if all your sensors are plugged back...
Top Bottom
Back
Forums
Menu