Search results

  1. F

    SUMMIT Radiator Doesn't Fit

    I have one and it fits fine its not a direct fit but In my opinion its better than the Mishimoto .I know of a couple people already complaining about it and the reason why is that its the same design as the fluidyne the main problem I discovered is the lower radiator support mounts and the ABS...
  2. F

    Difference between Cobra and GT distributor

    They are the same I have a cobra and I bought the GT distributor because thats the only one they had in stock.
  3. F

    Summit vs. Mishimoto

    I bought the universal Summit one for 160 and it only cost 3 dollars for the mounts to get it on there from home depot .And it holds more water than the Mishimoto radiator and the fluidyne.I had the fluidyne and it started to leak after 3 years I was more inpress with the summit one the welding...
  4. F

    no brakes pedal to the floor. NEED HELP ASAP

    my money is on the master cylinder if it starts off a little stiff or it feels spongy and its starts going down slowly its the master cylinder
  5. F

    Need to slap someone!!!!!!!!!!!!!

    LOLOLOLOLOL that awesome
  6. F

    buckling when under load

    UPDATE 11/26/07 The problem turned out to be the autolite spark plugs.This is the second set that has given me problems and they are under 6,000 miles used .I replaced them with motorcrafts which have last me more than 10,000 miles and the car was instantly better and my gas mileage got way...
  7. F

    buckling when under load

    I put a extra thick ground cable a couple of months ago just because the old one looked bad everything else on the car works 100 percent except for this problem I changed the wires same result I'm going to double check the gap and change out the cap and rotor since I notice all the contacts were...
  8. F

    buckling when under load

    The cap and rotor were replaced at the same time as the wires which is leading me to believe I have a bad set of wires since chytar is right about the wire resistance I run .50 gap and been running it like that since I got the car with no issues
  9. F

    buckling when under load

    My cobra has been buckling under load the past two weeks and I've tried to solved this problem the past week and I found two things.One two of my spark plug wires were glowing and arcing these are ford racing wires and they are only 7 months old which I'm mad about .Second my coil for some...
  10. F

    Anybody see the SoCal fires on the news!!!!???

    I live in riverside and work in Tustin I was really close to the canyon fire They almost wanted t evacuate us because of the Smoke it was really thick
  11. F

    i probly sound dumb askin this

    the rotors should side off after you take off the caliber and the caliper bracket
  12. F

    should i be burnin this much oil?

    what weight oil do you use?If you use the thinner weight (ie 5w-30 10w 30 ) it would burn up that much if you were driving it really hard I had it happen the first time I really romped on my cobra the previous owner still put 5w 30 oil in it with 85,000 miles and it burned about the same that...
  13. F

    replacing cobra ignition module

    You can buy the stock one from the autoparts store and it will run without a problem
  14. F

    Camry brakes?

    its pretty easy all you have to do is take off the caliper and the caliper bracket off and the rotor should just slide off.Or get them resurface I got my expedition's rotors resuface for 15 bucks for both .
  15. F

    idle problem

    FYI For anybody who lives in Cali Pepboys has the idle motor valve for 59.99 and it works like oem
  16. F

    99-04 gauges in our cars?

    Hey blackvert sorry to hijack the tread how's your car running did you get the tranny thing fixed?
  17. F

    idle problem

    Hey man you nailed it it WAS the stupid IAC valve I bought another one and bam the air noise went back to nornal and its idleing where its supposed to before I bought it.I took the intake off and blocked off the hole for the idle motor at the front of the inner throttle body and it idled normal...
  18. F

    idle problem

    I cleaned the maf twice I had a spare working tps and idle motor sitting in my garage its not a vacuum leak I checked all the hoses and spayed brake cleaner to see if the idle changed and nothing I belive its a fuel issue since the mass air controls the fuel also and there was a strong smell of...
  19. F

    Dyno Numbers in on a Gt40p setup...

    Hey man where in riverside do you live ? I live in moreno valley I'm trying to see how many other stangers live in riverside
  20. F

    idle problem

    My cobra started to idle at 1,800 rpm for some reason.I changed the idle motor tps sensor (I had spares) with the same result.The other thing I did notice the intake sounds louder I mean the sucking air noise is really noticible at idle something it didnt do before.As a trouble shooting step I...
Top Bottom
Back
Forums
Menu