Search results

  1. 2badazzstangs

    CARFAX please

    Had a few left. Emailing now.
  2. 2badazzstangs

    NJ inspection

    Thanks everyone, I will throw a stock catted pipe on there and hope for the best.
  3. 2badazzstangs

    remove the power steering?

    I bought the summit manual steering rack kit and put it on last weekend. It's not bad at all. It's definitely easier than turning compared to having the power steering rack on without the pump hooked up. It's not my daily driver so I don't mind it.
  4. 2badazzstangs

    NJ inspection

    I used to live in PA up until a couple of years ago so inspection wasn't a big deal. The car is a 90 GT that doesn't have cats or smog pump on it and I'm guessing it won't pass an inspection. I'm thinking about applying for a collector car sticker. Does anyone have any other ideas? Thanks
  5. 2badazzstangs

    Electric Fan question

    Another vote for flex-a-lite, I'm not sure of the model number but it is a dual electric fan, it definitely works.
  6. 2badazzstangs

    how much would you pay for this roller?

    Car is a 1989 mustang LX 5.0 Pro's: Car has a 5 lug conversion with 00 V6 wheels on it Cons: No motor or drive shaft Trans doesn't have 3rd gear paint is terrible a few rust spots on the hatch interior is beat and its porno red 155,000 miles on body they are asking $500, what do...
  7. 2badazzstangs

    mustang stereo tech ?'s

    i have infinity kappa 6.5's in the door and they fit fine, you should be able to fit most speakers in there, just use a spacer
  8. 2badazzstangs

    Remote Entry/Alarm Wiring Questions

    yeah you need relays or a 451m, their cheap, real cheap like a few bucks, let me know if you cant find them, i might have a 451m in my garage some where
  9. 2badazzstangs

    Remote Entry/Alarm Wiring Questions

    you need to cut your factory door lock wires and use relays to make the locks work. This is a 5 wire setup, it can be accomplished with part number dei 451m, or you can use two relays and make your own. Do a search on 5 wire door locks and you should be able to find a diagram fairly easy.
  10. 2badazzstangs

    Procharger p600b...any good?

    get it, i have the p600b and have no complaints, you should probably be able to pick it up for pretty cheap. i have track heat heads and intake and am making 440 hp at the wheels with an 11 lb setup.
  11. 2badazzstangs

    Static in system when engine is running.

    the quick fix they are referring to is called a ground loop isolater. They are fairly cheap, check ebay, should be around 10 bucks.
  12. 2badazzstangs

    Help with Fox Body Stereo

    The factory radio should take a minute to get out with bending a hanger or there is also keys for this. The harness you probably need is metra 70-1770, the dash kit is definatly metra 99-5025.
  13. 2badazzstangs

    Help!!!!!!!!! Ford Alarm/keyless entry

    it does seem that vehicle has the ford factory security in it. I don't believe the wire under the hood is for a siren as factory alarms rarely have sirens and usually just use the horn honk and flash the parking lights. Also on the steering column the led may be factory or that may be a dummy...
  14. 2badazzstangs

    hard alarm thing Q

    the 5 wires you probably have are power, ground, ignition and 2 starter wires. Your starter wire is probably cut and each wire out of this module goes to each side. Just cut this module out and reconnect the starter wire. This sounds like one of the most basic types of starter kills out there.
  15. 2badazzstangs

    Subframes

    Another vote for Maximum Motorsports
  16. 2badazzstangs

    Gauges

    I've got oil pressure and water temp in my vent location, go with those 2 gauges.
  17. 2badazzstangs

    speakers questions here?

    you need a crossover to accept the signal from the amp, radio and then out of the crossover there are two feeds, one for the tweeter and one for the woofer
  18. 2badazzstangs

    Just bought a GT w/ Alpine Head Unit...No Bass?

    no you would not use the stock amps to power them. you would use each 60w output from the alpine for each speaker.
  19. 2badazzstangs

    help with 460 & subs

    you will not loose the sound from the rear speakers, you are just tapping into them for the source(input) signal for the amplifier.