Search results

  1. TrickStang37

    351w with a c4/c6

    wanting to know if the flexplate is the same for running either tranny. Im buying a 351w with a c6 and want to swap it for a c4. so is it the same?
  2. TrickStang37

    Those running 351's and c4's

    Which type of c4 are you running? case filled or pan filled? I want to run longtubes (1 3/4) and have read that pan filled can cause problems on "some" vehicles, was seeing if the mustang fell under the "some" category. If you run 1 5/8 please post too, i would rather have some info than none. I...
  3. TrickStang37

    Bronco C4 in my 68 Mustang

    i just want an auto for it, I want something more for drag racing. and the t-5's are weak, i use to have a semi-fast t-5'ed mustang, so i'm no stranger to that. if i was gonna run a 5 spd in this car, it'd be a 3550 at the minimum, probably most likely a TKO. thanks for the link, I'll check it out.
  4. TrickStang37

    Bronco C4 in my 68 Mustang

    Im getting a 351w and C4 from a bronco and will be putting it in my 68 mustang. What would need to be done to the C4 to work? the bronco is a 4x4 so Im assuming they are different, right? I currently have a 3 spd in it std. (which i do not want in there anymore).
  5. TrickStang37

    69 I6 SWAP TO V8

    i think he'll need a different accelerator padal assembly as well.
  6. TrickStang37

    Transmission Crossmember

    thanks. as for the c4, i think im gonna line up a trade for my 3spd.
  7. TrickStang37

    Anyone want my Holley 4160 carb.

    learn to spell. you didnt add anything either, practice what you preach. I on the other hand dont mind keeping this thread alive or and I didn't mind what the subject matter was at first or now.
  8. TrickStang37

    Transmission Crossmember

    easy question i hope. does the 3spd manual transmissioin share the same crossmember as the C4? Im going to be switching out my 3spd to a C4 but cant find any info on transmission crossmembers.
  9. TrickStang37

    69 I6 SWAP TO V8

    do it do it. do it.
  10. TrickStang37

    Anyone want my Holley 4160 carb.

    quit complaining and let the mods do whatever they want, if they choose to do anything at all. with every post you make you helped keep this thread alive. as for setting the jetting and stuff, i dunno. I dont know anything about carbs really. lol
  11. TrickStang37

    High horsepower guys

    btw, its for my 68.
  12. TrickStang37

    High horsepower guys

    For you people running about 500+ hp, what fuel sender did you guys use? You would have to upgrade from the stock fuel line, right? Still using the stock tank? How bout radiator? And electric fan? Just trying to get an idea of what Im going to be needing eventually.
  13. TrickStang37

    What is the symptoms of a burnt valve?

    title says it all.
  14. TrickStang37

    ULTIMATE sleeper combo????!!1

    anything that runs slicks is not a sleeper imo
  15. TrickStang37

    need a 9in. for the new motor

    is currie the only one that sells the housing?
  16. TrickStang37

    car broken into!

    welcome to the club!!
  17. TrickStang37

    Radiator for 68 Restomod

    ok, im back. the fox body radiator is 2 3/4" thick X 19 3/4" tall X 30" wide. So no, it wont fit, unless i notch the frame. looks like the widest that will fit is 27". the width and height is fine. unless others have some info that i dont know nabout, there it is. anybody have an aluminum...
  18. TrickStang37

    Radiator for 68 Restomod

    good point, might as well go measure. I'll tell you guyst the results in a few...
  19. TrickStang37

    Radiator for 68 Restomod

    so am i gonna be the first to attempt whats never been done before?! i find that hard to believe.
  20. TrickStang37

    Radiator for 68 Restomod

    ok, posted earlier about a 9" swap for my 68 earlier, i think i got enough information for now on that, thanks a bunch. well, onto another subject, will a radiator from 87-93 Mustang work on a 68 mustang? I will be throwing in the EFI motor (in sig). Its a nice aluminum radiator/electric fan...
Top Bottom
Back
Forums
Menu