Search results

  1. stanglx2002

    Megasquirt Digital Dash

    That is no problem with the customization of the dashboard. The logo is just a background image that can be removed and then you can change the gauge background color and dashboard background to anything that you want. I try to have the gauges point straight up too just like you want by...
  2. stanglx2002

    Megasquirt Digital Dash

    I have been working on this one for a while, and is modeled after the LaFerrari dashboard. I have made the center section of the RPM gauge color changeable, so I have the classic yellow for Ferrari along with the red. Curious of everyone's thoughts on this one?
  3. stanglx2002

    Megasquirt Digital Dash

    Everything above is correct in only needing (3) main wires of batter, ground, and ignition. The dash bezel is also a direct replacement of the factory unit, so no need for fitment to install it in your vehicle.
  4. stanglx2002

    Megasquirt Digital Dash

    New Ford Racing Dashboards that we built
  5. stanglx2002

    Megasquirt Digital Dash

    We are projecting to have a release in the next 2-4 weeks and will have the published 6-week build time as the standard dash's. Since you are on the mailing list you will get an email as soon as its released as we are on the final stages now. We are not able to talk pricing, but you can PM me...
  6. stanglx2002

    Megasquirt Digital Dash

    We just finished that dashboard up, so either send me a PM or email at [email protected]
  7. stanglx2002

    Megasquirt Digital Dash

    This is a dashboard that we are finalizing that will become available to all DD-EFI customers
  8. stanglx2002

    Megasquirt Digital Dash

    I am glad that you are enjoying your dash. If you would like the history tail (the arrow/needle on your RPM and Speed gauges) to go away you can disable it under dashboard designer
  9. stanglx2002

    Progress Thread New Guy First Mustang

    The dented framerails I would just get a set of full length subframe connectors and cover them up. Then you get the added benefit of the stiffness it provides.
  10. stanglx2002

    Megasquirt Digital Dash

    This is the GPS Configuration on the dash
  11. stanglx2002

    Megasquirt Digital Dash

    The GPS is already pre-configured on all the dash's. Our default dashboards come already pre-setup using the gpsSpeedMPH input channel, but based on your previous post you look to be using the PIMP default dashboard. You will need to right-click on the dashboard and enable Designer Mode. Then...
  12. stanglx2002

    Build Thread Dustys has a new friend

  13. stanglx2002

    Progress Thread Therapy Car-- Freshening Up the Lower Intake

    Dry up everything and then place a paper towel over the above circled area. Then pressurize the system like you did before. If the paper towel is soaked then that is were its coming from. If its dry and the puddle is still on top of the timing cover then at least it rules that out. You don't...
  14. stanglx2002

    Progress Thread Therapy Car-- Freshening Up the Lower Intake

    It is typically pretty rare the cover itself has any issues, and you should be able to just replace the gaskets. I did this on the car before and do highly recommend lifting the engine to drop the oil pan down to put the cover on. Aligning the cover to the dowels with the pan in place still...
  15. stanglx2002

    Poll: Burnout video of the Gilamonster (1978 Fairmont)

    Since a double dog dare and possibly a triple dog dare might not convince Mike to give us our highly requested burnout video. Then maybe a poll of all of us might sway him to use those Chinese GoPro's to give us the much needed entertainment we are all asking for...
  16. stanglx2002

    Progress Thread '88 GT Hell Horse - All over the place

    I have gotten some additional work done, but much picture wise to really show. I gutted out the rest of the items under the car AOD transmission, driveshaft, and rear half of the exhaust. This did also include a lot of vacuuming of spider webs and nests after it sitting for almost 3 years now...
  17. stanglx2002

    Progress Thread '88 GT Hell Horse - All over the place

    Yes, I used a stud gun that I got from Harbor Freight to remove the last bit of dents that I was not able to get from inside the cowl area. The majority of the work was done with a ram press on a hydraulic ram pump from inside the cowl area pushing up while using body hammers to shape/flatten.
  18. stanglx2002

    Progress Thread '88 GT Hell Horse - All over the place

    I have been making progress but very slow progress due to needing to tackle a section of the car that I have been dreading since its been parked. The hood flew up 3 years ago now smashing in the cowl area. I didn't want to have it all cut out and put in a new one as I knew that I could fix it...
  19. stanglx2002

    Build Thread Enola- Finishing touches

    When you jump into the mustang over your "normal" vehicle just to do errands or go to work. I say driving 2-3 times a week, which makes your a "daily" then.
  20. stanglx2002

    Scarlet Rose Fckery.......

    ahhhhh... do we even dare ask from what then?
Top Bottom
Back
Forums
Menu