Search results

  1. P

    Kook's LT's, what mid pipe.

    I love my Kooks. They are great. I made a mid pipe out of my Basanni x with cats. When I got my headers they didn't make a mid pipe with cats. JDM is in Jersey and they are a dealer. I think Kooks is in the area too.
  2. P

    Any Cobras with kooks?

    I have heard problems with the BBK's, :notnice: weld slag is still in the pipes and people sucking them into the motor and ruining it. Do a search on BBK LT problems.
  3. P

    Any Cobras with kooks?

    I love my Kooks. They are easier to install. I modified my Basanni X-pipe with cats to fit them. They are fully coated but they are coated with the collector on. It is bare steel under the collector. That is the only way to make them fit together nicely. If they coat them before hand they wont...
  4. P

    Shift lite install?

    I bought an Auto Meter pro shift lite and have a question about hooking it up on my 97 Cobra. I bought the model 5340 which is for regular ignitions. I have a ground and power wire which is fine. Then I have a green wire to hook up to the coil negative or electronic tach terminal on an...
  5. P

    Vortech for 97 Cobra ?'s

    I was looking at a tuner kit from Vortech for my 97 Cobra and I don't want to run an FMU. I have a couple questions. What size injectors should I run? I was looking at 42's, is that too big? Is a 255 in the tank pump big enough? What size and type of MAF unit do you guys recomend? I was looking...
  6. P

    Production of the Lightning Concept?

    SVT is stopping production this year. They are taking 2 years off to set up for the new body styles. 2006 they will be up for sale.
  7. P

    03 Cobra kook long tubes leaking

    My Kooks fit fine and I don't have a leak at the collector. My collector fit on to the tubes really hard. I had to line up the tubes and then tap the collector on with a piece of wood so I don't dent it. The heat coating made for the tight fit.
  8. P

    nothingbutperformance.com

    Are they a good company to deal with? I stumbled across them and their prices seem pretty good. http://www.nothingbutperformance.com
  9. P

    What do stock Lightnings run in 1/4?

    My cousin has an 01 Lightning. When it was stock it ran a 13.7 at the semi-local drag strip. Now we put a couplr of mods on it and are hoping for around 12 in the spring. It responds to simple mods very well. It is a blast to drive, the torque is awsome. :nice: As for the MPG I believe he...
  10. P

    Best bolt-ons for LOW-END power on a 4v

    The Mach 1 cams are the same as the Nav. 5.4. I found them at www.fordpartsnetwork.com. The intake was changed a little to fit the shaker. I just found out about the compression ratio difference (9.85 Cobra and 10.1 Mach 1). The Mach 1 also comes with an iron crank instead of a steel like the...
  11. P

    Best bolt-ons for LOW-END power on a 4v

    There is no horsepower boost from the Mach 1 cams. The engine has the same HP numbers as the 99 - 01 Cobras. It gets you more lower end torque and a better torque curve.
  12. P

    Best bolt-ons for LOW-END power on a 4v

    I put on LT headers and I got a very flat torque curve through the rpm range. But they did hurt the torque up top. Look up (went to the dyno on friday) in the past message board for the results. Also the Mach 1 cams are supposed too give you more low end torque too ( I don't know the exact...
  13. P

    Att'n Pacific Green owners

    I love my Pacific Green Cobra. It is different. Great too see a few here.
Top Bottom
Back
Forums
Menu