Search results

  1. clement

    Engine What Cam? 289

    accell has some decent wires for $40ish. the msd wires are awesome but cost twice as much.
  2. clement

    Engine What Cam? 289

    I used to think this same thing before I bought an AED. Holleys metering is all jacked off. the CORRECT non holley double pumper for the combination wont have those issues. I would check the plug wires with that low rpm high load stumble. Ive had wires do that and then all of a sudden clear up...
  3. clement

    351w Help

    could be a big cam and low static compression. could be the valves adjusted wrong.
  4. clement

    Losing Coolant 1990 5.0 Gt

    check the coolant for carbon monoxide. it could have a blown HG.
  5. clement

    Changed Plugs, Now Running Like Crap

    ive had some of those wires have issues after removing them from plugs.
  6. clement

    408 Stroker Runs Hot!!! Help!

    what fan is on it? it could be that there is scale in the blocks water jackets. I would flush it completely. it could be sucking air because of the copper HGs. they are kind of a pain in the ass to seal. and the stuff you seal them with clogs the radiator. is there a spring in the lower radiator...
  7. clement

    Changed Plugs, Now Running Like Crap

    those ford 9mm wires are garbage. that's probably the problem.
  8. clement

    Changed Plugs, Now Running Like Crap

    Did u lay a plug wire on the headers?
  9. clement

    Engine What Oil To Use In 89 W/ V2 S-trim

    If you are gonna run this thing on pump gas I would run as cold of a cheap copper core plug as you can and use a champion if possible. if not run an autolite. the cheap ones. not because they are good but because they are garbage and come apart if you look at them. which is a good thing with a...
  10. clement

    Buying A Mustang

    im in TX, so cars don't rust here. That being said: I know of early cars that have lived there whole life in DFW and have rust. Since the factorys started using galvanized metal in the 70s there was no more rust in cars from this area unless there was a brake line issue or something. I would run...
  11. clement

    Help Me Decode This Vin - A Real Cobra?

    there were no convertible cobras in 93. so its a GT. they are just calling it a cobra because they put cobra rear valance on it.
  12. clement

    Help Me Decode This Vin - A Real Cobra?

    That vin is for a is a GT ragtop. 45 = convertible. so did someone stick a gt convertible vin on a hatch and try to pass it off as a cobra?
  13. clement

    Frustrated...

    The new cars are nice, but they are missing the death trap feel of the fox body. I guess that's a hard thing to sell new car buyers on now. I guess I should count my blessings, my 93 rarely gives me any trouble. Probably something to do with only driving it about 200 miles a year and the car...
  14. clement

    351 2v Weiand 7516 Intake Blowing Front And Rear Gaskets

    if you aren't running breathers or the pcv is plugged that can blow out gaskets.
  15. clement

    351w Efi Intake In A 67-68

    14lbs on a little set of heads running 9s is pretty serious. from what im told, the min cross section of that head is 2.1".
  16. clement

    Engine 1973 Mustang 351 2v Cleveland Carb Question

    that should work pretty well.
  17. clement

    351w Efi Intake In A 67-68

    ok, I thought we were talking about a less serious combo. id put a super victor on it since you are going to push it hard. if you want an efi intake put a TFS R on it, its got runner length and cross section. I don't think the rpm 2 will run as well, especially with the longer stroke. out of...
  18. clement

    351w Efi Intake In A 67-68

    he is running 2 61mm turbos, which is a lot of compressor for a 3.4" stroke. with a 3.25 gear. exactly what is your combination and goals? because I was running a t64 and making well over 500rwhp and running 10.60s@131 mph and the short runner didn't hurt a thing. are you building an 8 second...
  19. clement

    351w Efi Intake In A 67-68

    a gt40 will go into port stall. everywhere. it advances the whole curve. with a 3.5" stroke itll be more than fine with an ootb vic jr. the problem with runner length under boost is that the longer runners create more friction. friction creates turbulence and you get enough turbulence you...
  20. clement

    Too Much Mileage For Head Swap?

    a new set of heads wont make the shortblock burn oil. if it does it was going to burn oil anyway because it was hurt. that being said, back before I figured out how to make power all motor I ran a lot of power adder stuff. and I have replaced quite a few sets of head gaskets on my cars as well...
Top Bottom
Back
Forums
Menu