Search results

  1. Dagz

    Cam question with supercharger Need help ASAP

    I am just putting my motor together today and this is what I found. I need to know what you guys think of this cam with a charger. Here is what I have. A fox short block with forged stock pistons. the block have never been decked, .40 head gaskets, edelbrock performer aluminum heads 170cc...
  2. Dagz

    Cam question with Supercharger

    I am just putting my motor together today and this is what I found. I need to know what you guys think of this cam with a charger. Here is what I have. A fox short block with forged stock pistons. the block have never been decked, .40 head gaskets, edelbrock performer aluminum heads 170cc...
  3. Dagz

    Supercharger setup questions

    what do you guys think of this cam. Wasn't really sure what was in this short block to begin with. How do you think it will work, it's pretty big. here it is ENGINE: FORD 289-302 V8 RPM RANGE: 1500-6500 Duration at 0.006" Lift: Intake: 298° Exhaust: 302° Duration at 0.050" Lift...
  4. Dagz

    Canton oil pan fitment

    no tubular k member yet, but I might just say screw it and buy one as well as coil overs front and rear before I'm back together this year. It's a kick out style Canton
  5. Dagz

    Supercharger setup questions

    thanks pro killer
  6. Dagz

    Supercharger setup questions

    right on man your awsome. I only have one problem, I am at work right now and the network is filtering the picture. If you have time to post the number that would be great. Thanks for all the help
  7. Dagz

    Canton oil pan fitment

    Hello again. In case everyone hadn't noticed by the mass amounts of posts lately I'm getting close to installing my new engine and putting the car on the road for the summer. Has anyone with our year of car running a canton 7 qrt. pan out there? I heard from an egine builder the other day...
  8. Dagz

    Supercharger setup questions

    man you guys are awsome. 275 with a basic tune doesn't sound so bad. It would give me a good place to start. Also much cheaper than the tweecer route, and if I decided to go that way later on then I could always sell the sct. Do you have the name of the shop and I wonder if they would be...
  9. Dagz

    Supercharger setup questions

    right on that is what I thought. Seems to me that most of the sct stuff is 96 and newer. Harder to find stuff for our cars from what I can tell. but definatley something to look into
  10. Dagz

    Supercharger setup questions

    I was hoping for 400 to the wheels, and more is going to be bad a$$. How much is the hard where for a sct tune. I have heard and seen some things about tuning this way but really unsure. Also what is all needed to go this way Thanks again, I am new to the supercharged applications. I have...
  11. Dagz

    Pro m Questions

    I am currenty building a spuercharged setup and was concidering using a set of 42lbers instead of the 30's i originally got. I have a 80mm blow through pro m meter calibrated for 42's that was originally part of a twin turbo set up I bought for a fox car. my question is will this meter...
  12. Dagz

    Supercharger setup questions

    ok so I searched and found out that the pro-m will plug in no pig tail is requried. I will double check next time I go to the shop. However is the maf going to agree with the 94/95 computer. I know our cars are picky and really rely on the maf. I understand a stock fox meter will...
  13. Dagz

    Supercharger setup questions

    Once again thank you to everyone. Prokiller, so just to clear it up I can run the 42's and a maf, without the fmu while only manipulating the variables I have with no chip? Is there any need for the btm here? Do you think it will run well? Also I'll do some searching but the maf I have...
  14. Dagz

    Supercharger setup questions

    Anyone want to guess horse power and wheel horse power?? Just for fun. Thanks
  15. Dagz

    Supercharger setup questions

    right on guys thatnks so far. The Mustang, i have an fmu cald. for the 30's and the maf is the same way. I have a set of 42's and another maf for them but need the new fmu disc. I was worried about driveability with them though as I have heard they can have issues. With your tune are...
  16. Dagz

    Supercharger setup questions

    Ok, I searched and never found exactly what i was looking for so here it is. I have a fox short block with forged stock pistons. the block have never been decked, .40 head gaskets, edelbrock aluminum heads 170cc, edelbrock upper and lower/intake and elbow, 75mm throttle body, stock rails with...
  17. Dagz

    Head/Intake gaskets with Vortech

    Thaks for the reply, I guess I'm headed in the right direction then. Time to put it all together and see what happens. I know I should start a new thread but anyone want to guess some rwhp numbers on my combo with a 5 speed and 3.55's. thanks for the help
  18. Dagz

    Head/Intake gaskets with Vortech

    bump. anyone else?
  19. Dagz

    Head/Intake gaskets with Vortech

    Thanks for the replys I've also been told 1011-2, and felpro 1250 for the intake. Anythoughts on those.
  20. Dagz

    What to Keep, Move, or Delete... ENGINE BAY QUESTIONS!

    thanks man that's actually where i found that info a long time ago. I was searching this site and I found him and his info. Fancy how much that search stuff helps somedays
Top Bottom
Back
Forums
Menu