Search results

  1. 0

    98 cobra with an '03 6 speed????

    easiest way is to buy the conversion kit. try ddperformance.com
  2. 0

    Cobra Spoilers

    [URL=http://]www.thefordsource.com
  3. 0

    Nos Switches

    its a wot switch. yeah it alll works together. the wot switch only powers the nitrous at wide open throttle and the window switch uses set rpms, so with the two together you need wide open throttle and be within the set rpms. it makes the nitrous use safer.
  4. 0

    How much PSI?

    with forged internals and upgraded drivetrain you could run 10-15psi depending on the tune.
  5. 0

    Big Problem, Need Advice

    .612 lift? have never seen a 4.6 with that high of lift before. haerd it required too much work to accomplish. but your only cure is to either bore the block you have if the scratches arent too deep, or find another one. .30 over may not fix the scratch seeing that your block is .20 over already.
  6. 0

    Nos Switches

    a remote bottle opener is usually run on its own switch not the arming switch. a window switch is an ignition safety feature that many people use. it is installed to safely use nitrous by allowing a set of rpms that the nitrous is to be used. you set an rpm to activate it and an rpm to shut it...
  7. 0

    Adjusting exhaust pipes...maybe bending

    i doubt you will be able to bend it with anything less than a pipe bender.
  8. 0

    POWER shifting

    its not worth trying to do. it should really only be used by serious drag racers. it helps lower et(a few tenths) but can be costly on stock cars destroying a clutch, breaking transmissions.
  9. 0

    Really stupid coolant question...

    fill it like suggested with the front end raised on jackstands. fill it then start the motor and fill as needed.
  10. 0

    Cobra Times

    it is possible for a high 12 but i would invest in an intercooler before running it hard. 9psi without an intercooler is a alot of boost especially for stock powdered rods and weak factory pistons. does it have the vortech aftercooler?
  11. 0

    New exhaust is in order

    if you want more of a Nascar sound then either the slp loudmouth or the borla stingers sound the most like it. but they do so with more of a price.
  12. 0

    Ss Vs Bullitt

    well with the right tune and good driving it will be a close race. he may have an edge because of his closer ratio gear box.
  13. 0

    Ss Vs Bullitt

    try a diablo predator. its a handheld tuner that can be used to tune over and over. way better than a chip. yeah a tune is what you need. our cars need them if not your motor and everything done is not doing anything because the computer is running it as a 281 and not a 310. the 310 can use more...
  14. 0

    Need info on free flowing, straight through design mufflers

    the loudest mustang i know of with a full exhaust is a 03 mach with bbk lt's, bbk o/r x-pipe and the borla stingers. its loud, raspy, and yet very intimidating and aggressive sounding.
  15. 0

    Ss Vs Bullitt

    i say you may have an edge. do you have head and cam uprades? you have the lower end and gearing but still a little vague with your mods. displacement is good as it helps but realize you have a 5.1 he has a 5.7. you have steeper gears he has 3.42's. so it may be very close.is he a manual or auto?
  16. 0

    What are all the parts needed for a rear gear swap

    a rear ring and pinion swap is one of the most difficult jobs to get right.aside from parts there are specil tools needed to do the job so if you have never done one before take it to a shop that is equipped to do so. it is more involved than shoving everything in and marking the teeth with...
  17. 0

    cats removed....

    Cheapest way is o/r h such as a mac and a set of mil eliminators. that about 200 plus shipping. if not find a salvage yard with a wrecked car that you can get a stock h pipe from
  18. 0

    Please guys & gals......where can I get this bumper??

    you can buy the 03 wing with the lights. as for the bumper unsure where it can be found that one may be one with filled in letters.
  19. 0

    tire sizes on a 99 GT with mach1 rims

    a 275 will fit with a slight bulge. i have stock rims(17x8) with 275's that fit ok.
  20. 0

    I need blower advice !!!

    your in luck Muscle Mustangs and Fast Fords magazine just did this blower install on a 2v gt motor. so it can be done and the kit is designed for a 70mm t-body. but they ran a test of the stock t-body(65mm) vs. the 70mm one. so you can reuse your stock one if you had to.
Top Bottom
Back
Forums
Menu