Search results

  1. SVT98Snake

    Where can I find 2003 Cobra Chin spoiler??

    Well...I heard Chris Hanson was after you for donkey punching your sister....:rlaugh:
  2. SVT98Snake

    Where can I find 2003 Cobra Chin spoiler??

    Holy Moose! 115$$? I will keep my beat up one! My 3 FRPS's were only $200
  3. SVT98Snake

    1/4 mile estimates

    please post times!!!
  4. SVT98Snake

    long tube upgrade

    pain in the rear... like said above drop the K, get 3 jacks....1 for the motor, one for the tranny(safety measure) and one for the crossover on the midpipe(IMO)...plan on a weekend job. As far as power on a N/A 4v....I gained 14hp off the start....with a tune I made 294 with LT's, o/r mid, mac...
  5. SVT98Snake

    Cobra modifications

    what mph? My take- If you want to get a few lengts on a STOCK LS1.... 4.30's JLT CAI Steeda UD's LT's OR H MAC cat back SCT tune I made right at 300 with that on my 98...you have an 01 with better heads and intake, so you should be 310-315.... that will get you mid 12's with good driving.
  6. SVT98Snake

    Dyno numbers

    since this is old brought up, give me some detailes...I tracked my portet/low power gremlin for almost 6 months. Give me this. timing what cai what exhaust
  7. SVT98Snake

    Where can I find 2003 Cobra Chin spoiler??

    probably be cheaper just to buy a new car....
  8. SVT98Snake

    Where can I find 2003 Cobra Chin spoiler??

    like a Jay Leno chin?
  9. SVT98Snake

    04 cobra shifting ? and 1/4 mi time

    And that makes you smart? Ok...sorry UM..I had to get the last word :)
  10. SVT98Snake

    1/4 mile estimates

    20 degree range makes a difference since humidity generally goes up with temp.... My 98 with an OR X pipe and Mac 2.5 cat back with a KN ran 13.70 @ 104....stock gears. Keep in mind that my car pulled my buddies 99 with exhaust and 3.73's about a half car. If you have the 'fix' you should run...
  11. SVT98Snake

    2.5" vs 3" cat back exhaust 03 Cobra

    With a 99-01? Did you lose a lot of TQ? Not slamming, just curious. My buddy had a 99 and put a 3" flowmaster cat back on and lost torque and his ET went from 13.40's to 13.50's.
  12. SVT98Snake

    04 cobra shifting ? and 1/4 mi time

    you are an idiot. Powershifting gets lower ET's....this guy's post was asking about times, and powershifting. Meaning he knows powershifting gets lower ET's, but was concerned about rumors saying the cobra isn't capable of that.... Are you 16?
  13. SVT98Snake

    2.5" vs 3" cat back exhaust 03 Cobra

    I gained a little(5-7 hp) with mine...I love it though.
  14. SVT98Snake

    Freakin T/As

    you have a high 12 sec car....he is probably the same. He is making upwards of 290 at the tires and you should be arouns 285-295. If he has dr's and a stall....it will be tough for you.
  15. SVT98Snake

    New Time....

    Any bidders? I am going to TRP (Tulsa Raceway) this Fri. Here are the mods. 2.8 upper 2# lower Steg IV JLT CAI BBK OR X (2.5) MAC 3" C/B IRS BRACE (meaning I will launch hard:)) MT 15/8 slicks (Before I will run on my Nitto 315/17 DR's for comparison) SCT RAPTOR tune: Will run...
  16. SVT98Snake

    Anyone here running 10's in the 1/4?

    Poser. lol.. Damn...what if I weighed 3080 with 519 hp??? mid 10's???
  17. SVT98Snake

    Shifting hard????

    WOW.. "It's better to be thought a fool, then open your mouth and reveal all doubt!" QFT :D
  18. SVT98Snake

    MGW T-56 short throw

    Word of advice....you WILL not utilize the port with just an upper. The ported blowers only increase airflow....with the upper you are already pretty much maxed out. You need to up the boost to take advantage of the extra flow from the port in order to see the $$ worth. For example: Here...
  19. SVT98Snake

    Shifting hard????

    hmm...I must be lucky. I haven't had any problems.
  20. SVT98Snake

    03 cobra k/bell noise?

    it is to an extent. at idle, all roots/screw blowers have a bit of a whistle/howl.
Top Bottom
Back
Forums
Menu