Search results

  1. 98bluevert

    just got my rebate check...time for some gears

    if you don't do alot of highway driving get 4.56's unless you plan on getting a supercharger or something. i don't care what anyone else says on this forum i love them. pulls hard in every gear and with a decent set of tires i have no problems hooking up. i had 4.10's and they where alright. I...
  2. 98bluevert

    how to find out if you have gears?

    Some 98's came with 3.27's from ford.
  3. 98bluevert

    Is 4.30 gears too much?

    I just had 4.56's put after my 4.10's chucked a ring bolt. i have a 98 and i love them i just need better tires now. also have PI cams and intake. not a d/d. right at 3000 rpms in 5th at 70 mph.
  4. 98bluevert

    D/S ???

    Does anyone know if an aluminum driveshaft out of a fox will fit a 96-04 gt. Someone told me all you have to do is change yokes and your good to go.
  5. 98bluevert

    Rear End Problem???

    Found out they didn't use locktite on mine
  6. 98bluevert

    Parts Question

    a friend of mine sent it to me. it was an ebay post. no name brand that i could see. thought it was strange. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230231458546&ssPageName=ADME:B:EF:MOTORS:1123
  7. 98bluevert

    Parts Question

    Application: Ford 8.8, Standard rotation, Rear differentials, (Requires notched cross pin, $31.99) Requires notched cross pin??? for a 4.56 rear gear. has anyone heard of this.
  8. 98bluevert

    Just installed an o/r prochamber and have a few problems

    i think it might be a series of prochambers that where made because i got mine used was told it would fit my 98 and the o2 sensors are not long enough. i had a leaking problem to but i took everything loose, then just tightened each part of it slowly. do one side till its snug(but everthing...
  9. 98bluevert

    Rear End Problem???

    What are the chances of of a ring bolt shearing off or backing out. took it into the shop today and they said one bolt was completely missing(ground up probably) 2 where out just floating around and a couple others where backing out. Its been 4 years but only 15,500 miles since my 4.10 was...
  10. 98bluevert

    sniper tuner

    they have it for 400 now. do you know how i can get it for 350
  11. 98bluevert

    Headers Question

    sorry to hijack this but it might be a question he has too. I have a prochamber that seems to me would be a short prochamber for longtubes and it has extension tube to get to the stock manifolds. Now will any LT header bolt up to it or just the macs. Whats the diffrence in power from MAC LT and...
  12. 98bluevert

    upgrade injectors???

    he has the whole zex kit with window switch and everything. if he goes with the 175 shot will he need bigger injectors,MAF sensor???
  13. 98bluevert

    Need help after replacing pushrods.

    Ding! Ding! Ding! u have the right answer. the rotor was pointing at the number one cylinder when i started with torqueing them down, but come to find out the cam had been replaced. Guess they didn't get the distributor back in exactly how it suppose to because tdc for 1 the rotor was at 8...
  14. 98bluevert

    Need help after replacing pushrods.

    When i torqued down the rockers i did it how the haynes manual said to do it and torqued them down to 23 ft/lbs. It said 18-25. if this is it is there anyway to check it without taking it back apart.
  15. 98bluevert

    Need help after replacing pushrods.

    After i replaced the pushrods and put everything back together, the engine turns over and doesn't start. any ideas. strong gas smell from exhaust, if i push on the throttle it acts like it wants to start, but doesn't.
  16. 98bluevert

    need help with a part!!!

    Ok i was putting the intake on my car the other night and i got mad and moved the egr tube out of the way by slightly bending it, when i did so i noticed something behind it snapped off and i just want to know what it is, does and how much for a new one.
  17. 98bluevert

    Pi intake swap numbers?

    i know its worth it (so are the cams)but do the adapter plates make a difference under the curve. smooth anything out maybe more power under the curve because of it, or are they just a waste of money. so should i just use PI gaskets and rtv around the coolant passage.
  18. 98bluevert

    Pi intake swap numbers?

    Ok i was wounder what the swap numbers are under the curve for a npi intake to a pi intake. i know its like 17 peak rwhp. but does anyone have a dyno graph or just numbers all the way through the curve for the difference? Also what about those adapter plates i have read about. peak to peak...
  19. 98bluevert

    $130 Plastic Elbow! Pics.

    Here's a pic taken after my intake crossover cracked.:mad: :mad: :mad: i'm guessing it's the same as the newer mustangs Also try mpsautosalvage.com
  20. 98bluevert

    Does anyone still cover the cracked non-pi intakes?

    i just tapped the hole and have the drill bit and tap i'll sell ya real cheap. just IM and i'll get back to ya
Top Bottom
Back
Forums
Menu