Search results

  1. back2fox

    Looking for notchback pics

    Here is mine
  2. back2fox

    Lowered car pics please

    Here is a couple H&R Sport, Bilstein Rear Shocks. Eibach Sportlines.
  3. back2fox

    Shock and Strut Removal and Installation

    I just installed new springs and shocks on my '86 last month. I used this method from the site listed below. It seemed very safe without using a spring compressor. It took me all day, but it was well worth it. http://www.mustangmotorsport.com/springs.html
  4. back2fox

    Back in the Saddle...finally (pics)

    OK...This is weird because I just picked up an 86 coupe and I also have a Legacy GT. Good luck with everything. I've started on my project as well.
  5. back2fox

    Window Motor Replacement

    I have an aftermarket one, but I just removed the bolts holding the motor on, disconnected the wires, support the window as you pull the old motor out.
  6. back2fox

    My 86 project begins...

    I posted last month about my wrecked 86 GT. It was going to cost way too much to fix so I found an '86 notch that I'm going to bring to life. Here are some pics to show the progress.
  7. back2fox

    Found '86 Coupe

    After a month of misery since wrecking my '86 GT, I finally found another one. It's an '86 coupe with full 89-90 5.0 driveline including dash and other interior parts. The guy got tired of it. I guess he had a problem with the body guy doing work on it. Anyway, I'm happy. Now I can start to...
  8. back2fox

    nitrous spark plug..

    I just use autolite 24's, set the gap at 35. I've used them for over a year and no problems.
  9. back2fox

    new stang...horsepower goals

    Here is what I did with my H/C/I and the power I got out of it. Stock '88 short block Thumper heads, upgraded springs to match cam CI custom cam from Jay Ported lower and upper stock intake from Tmoss Put down 265 rwhp and 297 rwtq I added 75hp NX wet shot to get me in the 335 rwhp...
  10. back2fox

    Lowering springs ! Need help !

    H&R Sports It took me all day, but I got them in there. Before After
  11. back2fox

    What springs you runnin w/17's? Post em up!!!

    I have h&r sport springs with bilstein shocks. 17x9's up front gave me some rubbing issues so I have 17x8 front and 17x9 rears. I was happy with the ride quality.
  12. back2fox

    hci installed, need tuning help!

    Mine did the same thing after my h/c/i. I had my distributor out of wack. If you have another mustang handy. Look at their position of the dizzy and try to get it as close as possible. Then set the timing. And of course the maf has to be calibrated for 24lb injectors.
  13. back2fox

    1988 LX 302 with high speed vibration

    I had the same vibration around 80 and above. I have new aluminum driveshaft, and 3.73 gears. New bearing kit installed along with gears. The tires were balanced the day of my road trip. I can't figure it out either. I guess I never will. I totaled my car last weekend anyway. Hopefully you...
  14. back2fox

    Professional products throttle body

    I've been using one on my car for the last year. No problems. It looks good and great price. This is a great site. I used them a lot while I was doing my H/C/I. http://www.cnc-motorsports.com/product.asp?ProdID=8002&CtgID=19321
  15. back2fox

    Wrecked the stang

    Here are some detailed pics of the areas you needed. I hope these work. I'm still waiting on estimates to straighten the rear quarter panel and door hinge area. Maybe too much to save this thing. Door latch area Rocker panel near seat bolt in area Pinch weld area near rear seat bolt...
  16. back2fox

    Wrecked the stang

    Thanks again BK. Tomorrow I will remove the seat so I can get close to duplicating the pics. I'll post those up by Weds.
  17. back2fox

    I got a 1990 Mustang GT with something unbalanced

    I went through this last year. After I changed the tranny mount, driveshaft, flywheel, harmonic balancer. I finally checked the motor mounts and one was loose. Lesson learned. Check for loose nuts and bolts first.
  18. back2fox

    Got My Saleen SC Wheels

    I had the 17x9's up front but too much rubbing so I went to 17x8's. I have 245/45 up front and no rubbing issues with h&r sports.
  19. back2fox

    Wrecked the stang

    This site is awesome!! Thanks BK for your help. I hope I can fix it. I have so much time in this car that it would be hard to let it go. It was hit by an old datsun pickup. My hip was bruised but thats about it. I saw the flash of his headlight right before the impact and moved my body...
  20. back2fox

    Wrecked the stang

    I was in Bradenton for the NMRA event. I was driving around downtown in which I wasn't familiar with. It was rainy, windy, and dark out. I turned down a one-way street and thought I had enough time to turn into a store parking lot but no...wham and that was the end of my weekend. Dumb...
Top Bottom
Back
Forums
Menu