Search results

  1. B

    Progress Thread Beating A Dead Horse.... My $500 66 Mustang Coupe Build.

    Thanks guys I have not welded new perches on yet, but I did buy some from Summit. Right now I have the springs on the stock perches, and the front spring eye bolts in, just so I could rotate the rear up and check for tire clearance issues. Now I need to weld on the new perches, clean up the...
  2. B

    Progress Thread Beating A Dead Horse.... My $500 66 Mustang Coupe Build.

    OK. Only had 3 hours today to work on the car. I was able to rip out the old 6cyl rear end, and wheel the new 8.8 under it. Looks like I might have lucked out. I was expecting to be a hair too wide, and was planning on slitting the rear quarter flare and pulling it out an inch. Looks like I...
  3. B

    Progress Thread Beating A Dead Horse.... My $500 66 Mustang Coupe Build.

    Ok, Got some tires delivered and mounted So today I narrowed my rack, mounted up the front tires, and pushed her out of the garage, and spun her around so that I can start work hanging the new rear end. Once the rear is hung, I will work on firewall and cowl.. then I can do floors and start...
  4. B

    Progress Thread Beating A Dead Horse.... My $500 66 Mustang Coupe Build.

    I was finally able to finish the right side frame rail, and mount the suspension on that side, along with the rack and pinion.. Fenders are just resting there, next up is cleaning the firewall, and the dreaded Mustang cowl repair
  5. B

    Progress Thread Beating A Dead Horse.... My $500 66 Mustang Coupe Build.

    Thanks guys. For the kit, I got a speedway motors crossmember kit, I also got the rack and pinion, and springs from them. The tubular control arms are from ebay, as was a 2" drop spindle and disk brake kit.
  6. B

    Progress Thread Beating A Dead Horse.... My $500 66 Mustang Coupe Build.

    If anyone is interested in something other than Mustangs, here is the truck that took priority over the Mustang.. and No, it's not getting painted.. lol
  7. B

    Progress Thread Beating A Dead Horse.... My $500 66 Mustang Coupe Build.

    This is what I found under the front fender.. little rough, but once I scraped away all the undercoating, it was actually not too horrible.. The whole time I had been trying to decide what to do for brakes.. I thought about just rebuilding the stock front end and adding a disk kit, but the...
  8. B

    Progress Thread Beating A Dead Horse.... My $500 66 Mustang Coupe Build.

    A little back story.. (or you can skip ahead to the photos) Back in June I went to look at a 57 Chevy. The car was not what it appeared to be in photos, and at the cost of 57 Chevy parts, required more than I was willing to deal with at the time. The guy had a few other vehicles in the yard...
  9. B

    New Camera, New Dib Mustang, New Parts, New Photos

    Lol, Thanks anyway I need to get out more and play with it, and need a zoom lens for sure, but so far it is a big leap forward from what I had ;)
  10. B

    New Camera, New Dib Mustang, New Parts, New Photos

    Finally got a DSLR camera!! So this weekend I got up at the crack of dawn and went to take some photos. Car is my 2013 Deep Impact Blue Mustang, so far I have tinted windows, tinted marker lights, blacked out grille surround, blacked out horse, blacked out trunk emblem surround and replaced...
  11. B

    Post Pics of Your Mustang

  12. B

    My 2013 With And Without 2010 Scoop.. Thoughts?

    Thanks :) I liked the scoop on the Roush... that's what made me try it, but now I am not sure... I could go either way
  13. B

    My 2013 With And Without 2010 Scoop.. Thoughts?

    That is my 74, was a 400 - 4-speed car that was dark brown with tan interior... now it has a fuel injected, aluminum head 383, 4-speed, pistol grip, 3.91's in an 8-3/4 rear.
  14. B

    My 2013 With And Without 2010 Scoop.. Thoughts?

    ok, so I was wondering if the 2010 - 2012 scoops would fit the 2013s since the hoods are different.. No one knew, so I decided like the spoiler, to try it.. It fits! Ok, so now should I bolt it down? **Note: gasket is keeping it raised off the hood a hair in the crappy cell phone pics...
  15. B

    Check out what we did this weekend :)

    That 502 is awesome!!! Ours came about because we had an engine with no car, and a car with no engine... Sooo :)
  16. B

    pic of my new tattoo...

    Nice.. Here is my newest one :)
  17. B

    Check out what we did this weekend :)

    Shhh.. :p This is my friends car that we decided to get running :D Some of you will be able to spot what's wrong with these photos :shock:
  18. B

    official 4.6 liter Mustang photo thread

    A few updates from Page 4 :D Reminder of the car New Photos
  19. B

    official 4.6 liter Mustang photo thread

  20. B

    Show me your gauge setups!

Top Bottom
Back
Forums
Menu