Search results

  1. G

    For the love of God PLEASE HELP Stumped!!!!

    ok so i got under my dash and seen that when i depress the pedal the quadrent isn't moving. The clutch cable seems to be stuk so I am guessing that a tooth or something broke off. My question is how the hell can i get my meaty paws in there to get the old quadrant off? Will i have to take the...
  2. G

    For the love of God PLEASE HELP Stumped!!!!

    :shrug: I am stumped. So I changed my clutch cable because the pedal would go to the floor and the cable looked frayed. I hooked up the new clutch cable and still the same, the pedal has a little resitance then clicks little resistance then clicks. What coulcd that be. For a while i could at...
  3. G

    BBK 70mm TB, should I buy from Ebay/Classifieds, or New?

    DOnt seem bad to me
  4. G

    Help me achieve 300RWHP

    Maybe upgrade the cam to an f. It sounds wicked and provides great top end power
  5. G

    Need guage help quick please!!!!

    You can put it on any wire that would only have juice going to it if it were turned on. Get a test a pick out a few wires then test them with the car off then with the car turned on. ( not necc turned on but the key turned all the way with out actually kicking over) Which ever wire gets juice...
  6. G

    Need help with exhaust setup

    You would need to know a very trustworthy mechanic. Without cats not many at all will mess around because the fines are now ridcoulous at least up here in pa. The fines are up to $10,000 and a revoktion of the liscense to inspect. Pretty hefty! I would recommend getting a good shop to setyou...
  7. G

    Gauges

    Possiably the 93 cobra r? Don't quote me on that one though.
  8. G

    Gauges

    A whole new gauge cluster my friend. Check the yardss
  9. G

    Rev limiter fuel or spark cutoff?

    I know the 01's cut fuel and it is quite shocking the first time it happens.
  10. G

    wtf is car and driver smoking

    Wait for a 5.0 or mm&ff test drive. They know how to drive them and will get the ral #'s. If anyone is an avid reader of mm&ff you will remember in 2002 they ran a bone stock 02 gt 13.71.
  11. G

    Installed RPM Extender, questions???

    Hey i dont know but I didnt want your thread to die
  12. G

    what is the proper wheel lugnut torque on a 91 lx 5.0

    I like to just turn till I can't turn the lug nut wrench anymore. whats torque? This is just a sad attempt at humor
  13. G

    What Temp Do You Guys See With Stock Temp Gauge?

    Yes you are correct sir. This is all because some people if they noticed the slightest change in the gauge reading would bring the car back to the dealer to be looked at
  14. G

    300 RWHP and over

    Well I am not at 300 My best dynoe was 291hp with the mods in my sig I avg around 284-287 with the 291 being somewhat of a anomoly Also that is of course without the nitrous
  15. G

    Heeelpppp!!!!! My baby is down

    damn skinny gf hates me working on my cars long story
  16. G

    Heeelpppp!!!!! My baby is down

    Ok so i know I need to replace the clutch cable, problem is I can get the damn thing of the clutch pedal. There's absoultly no room :bang: I am a big guy so I even took out the driver side seat to free up some room and still no luck, any one have a way of doing this or an easier way, my poor...
  17. G

    Axle Leak!?!?

    Wow good directions this is going on my how to file for when/if it happens to me
  18. G

    Clutch Cable

    Did you get any pics yet? i am having a hard time removing the cable from the clutch pedal. I am to big, i took out the seat and tried to get under there and i still can't see anything. Any help would be greatly apprciated.
  19. G

    Will a Mac H pipe bolt up to stock catback?

    I disagree, the aftermarket h-pipes allow for a much louder sound. At least on my 98 gt it did.
  20. G

    THE FRIGGIN FUMES ARE KILLIN ME!!!

    bassaini = expensive. Catco = cheap. best bet if you want to do it on the cheap, pick up a pair of catco hi-flo cats, go to a shop that welds, mieneke - speedy - midas and ask them if they will weld on the cats. Some wont touch it others will if you slip them a $20. Better even if you...
Top Bottom
Back
Forums
Menu