Search results

  1. 7

    4-lug wheel spacers?

    :lol: That would be sweet, driving down the highway at 70mph,and all you see is a rim pass you by. know it's your rim before the ass of the car drops and you start running the brake drum into the pavement.:rlaugh:
  2. 7

    Turbo question

    If they are water cooled this means they are ball bearing turbos. they will have both oil and water lines ran to them. Ball bearing turbo are better than a normal turbo, but not needed. People do not normal going this route because they come with a little higher price tag. I'm in the...
  3. 7

    Ceramic Ford Racing Headers

    Here is a pic (took today) of the ford headers I installed on my brother-inlaws car about 2 years ago. Its is not a daily driver, only gets drivin in nice weather. They could use a little polishing up. click to exspand for a larger picture, and you can see they have a few rust spot...
  4. 7

    4-lug wheel spacers?

    Yes, I would not go with spacers either!
  5. 7

    Most boost you can run on an vortech A trim ?

    CORRECT CORRECT You may get around the 300hp mark with the stock 3.33 pulley.:nice: I due believe if you try to surpass the 10lbs you will be spinning the compressor too fast and it would not be very efficient. I have ran a 2.95 pulley and gotten around 8lbs before.;) You can...
  6. 7

    A- Trim

    I ran a SC-trim on a stock 5.0 two summers ago, With the smaller pulley you could get 8lbs of boost and maybe get close to the 12's like real low 13's. than with a few more mods and pactice you could get into the 12's With a all stock motor and the sc-trim at 5lbs I only ran a best of 13.9
  7. 7

    Ceramic Ford Racing Headers

    I installed a set on my brother-inlaws car. They seem to pit fine. But they are a little on the pricey side. you could get a different brand for half the price. Like maybe BBK. I have install Borla header on my stang in the past they fit fine too. only thing I hated about them was when you...
  8. 7

    94 Cobra or 93'

    keep yours. Ive sold 3 different stangs in the past, and every time I do I hate my self for it. I still wish I had my orignal all black 88gt I had in 97'. what hurts me the most is i see it around town once in a while, and the guy who has it now trashed the *@!# out of it. Plus the cobra...
  9. 7

    my fiance wants to get a mustang tattoo

    I think we need to see pics of the spots she intends to get it on, you know to better access the problem:lol:
  10. 7

    *regurgitates violently*

    I do remember the car in Musclemustang& fast fords. last year or maybe late 2004. If you think that the outside is terrible you should check out the write up in the mag. and see the inside of the car. the green is carried through out the cars inside.:barf:
  11. 7

    351C Engine Swap

    I have a 351c backed by a toploader. Are you talking about a 2valve or a 4valve 351c. Because i don't think the 2v would be worth the effort.
  12. 7

    reverse rotation water pump

    correct! It just means that you belt is routed from the other side of the pulley than a standard 302 making the water pump pulley turn the opposite direction.
  13. 7

    Anyone have a bumpsteer / adjustable tie rod kit?

    They are the tappered kit, The bolt through kit will need drilling of the spindle to be installed. I did not want to go that route. whether you install a bump steer kit or a drop spindle you are doing the same thing to the suspension. why go the more exspensive route. I don't think the...
  14. 7

    help me select a proper head gasket

    Than I think I will stick with the with the 1152 graphite gaskets without the lock-wire that I have on order for now. Because my block is not o-ringed, and I have plans on buying a 306 shortblock next winter. I will get the 306 o-ringed at the time of purchase.
  15. 7

    wont start unless tb blocked PLEASE HELP!!!

    It sounds to me like a Mass air problem, The car should not start or run with the mass disconnected
  16. 7

    help me select a proper head gasket

    SO what you telling me lock-wire means O-ringed. Why two different names for the same thing.
  17. 7

    installing a new oil pan

    I guess I will repeat my earlier post71swing
  18. 7

    timing chain cover seal replacement, with timm cover on??

    I just replaced my seal yesterday, but my motor is out of the car. It could be a pain with the motor in the car because my seal wasn't the easiest thing to get out. With the timing cover removed I had to use a socket the same size as the seal and hammer it out from the back side. The seal...
  19. 7

    help me select a proper head gasket

    My setup is a stock short block with arp studs, and trickflow intake. I will also be installing a turbo kit this winter, would like to run about 8lbs boost. All my how to books recommend felpro graphite gaskets, so I ordered a set of the graphite 1152 1152 link...
  20. 7

    Granatelli lower control arms

    Also they have fallen off the mustang scene alittle, But HPM makes a great control arm. I have owned all of there suspension products and would recomend them over and over again. http://hpmperformanceproducts.com/ They are also the supplier/makers of the ford racing control arms, which...
Top Bottom
Back
Forums
Menu