Search results

  1. 7

    Granatelli lower control arms

    I run the PRO3 weight jackers that are sold right here on stangnet and there are the same as the MM & the granitelli, But cheaper. NO complaints here. Would put a link in for you, but I don't know what happen to stangnet store. It doesn't appear to have that many product listed anymore...
  2. 7

    Mustang Tech Book

    Here are links to all the ones I own. the first two are great for a beginner. They will show you every step by step for all the basic bolt on and upgrade. They show everything from how to tune the car for max performance to the popular performance parts and bolt-ons. You don't need to get...
  3. 7

    Looky what i get in the near future....

    SRT-4's are fast and they do beat plenty of mustangs at the local track on fridays, But I'm not carzy about the ricer decals. get rid of the decals and gain some respect from the domestics. Also I hope it doesn't have a loud mouth tip on the back.
  4. 7

    wont start unless tb blocked PLEASE HELP!!!

    I too would check the air bypass valve on the front of the thottle body they do get carbon build up on the inside, and do go bad once in a while. They are not cheap to replace. They will run you about 80$new. I also take it your car is non-mass air equiped (pre 89) if you are covering the...
  5. 7

    installing a new oil pan

    You took my idea. This would be a good time to install a aftermarket k-member if you desire one in the future. If not I would just take your time and pull the engine to do it right. Also address anything else that is needed at the time. maybe motor mounts.
  6. 7

    Need some help

    water coming out of the lower bolt hole is normal, The lower bolts bolt into the water ports. Just make shure when you re-install that you put some sealer on the threads. just clean her all up and re-install heads with felpro graphite heads gaskets part number #1152. 25$ each. how did the...
  7. 7

    Cobra Replica Intake

    I would find the source of the problem before investing more money. What if it is not the intake. Then you just bought a gt40 lower which is the same as the one you have for nothing. would be a waste of a few 100$. FOR EXSAMPLE: back in day when I was rebuilding my motor out of my first...
  8. 7

    Summit Racing Wheels

    here are a few more pics, the second picture makes the rim look greenish because the camera's flash was on
  9. 7

    Summit Racing Wheels

    here comes the picture whoring, My baby & the summit rims
  10. 7

    Worst mistake ever in my life!!!!!

    I put those heads on my first mustang when I was 17. Didn't know it at the time. They did seem to kill the power in the upper rpm range alittle never had the car dyno'd, but they felt different. I was 17 working at walmart at the time making only 6$ an hour. I had pulled the motor to...
  11. 7

    Summit Racing Wheels

    I have these rims and will get some pics for you as soon as I get home. Right now I'm trapped at work. I purchased them for slicks for my baby, a (71 dodge dart). 15x8 in the back and 15x4 for the fronts. The rims seems to be good quality, only problem is they are going like hotcakes and...
  12. 7

    Tall Valve covers, will they fit?

    :banana: Those tall valve-covers will look really sweet with no intake on the car.
  13. 7

    Turbo kits?

    No, that may have been a different Rick. Rick never work at HPM. They contracted out to him for work. For exsample: HPM doesn't do there own tranny work. They may offer the service but Rick was rebiulding all there trannys for a while. I may have worded that wrong to begin with, please...
  14. 7

    Anyone have a bumpsteer / adjustable tie rod kit?

    I also converted to the coilover springs & and C/C plates at the same time so yes I did have to get it re-align. But If you clearly mark the thread (maybe with white-out) were the sleeve needs to be srewed up too, you could get away without re-aligning it. But if you miss the mark by a...
  15. 7

    Anyone have a bumpsteer / adjustable tie rod kit?

    here is the pic I promised:nice: This was take before I switched the spacers around now I run a large & small spacer on the top and just a small spacer on the bottom.
  16. 7

    Anyone have a bumpsteer / adjustable tie rod kit?

    will get some pics later but, the spacers will depend on your cars ride height. Idea is with the car on the ground and it at the proper ride height, the tie rod should be parallel with the ground. I personally run a HPM kit. I think I have two large spacer on the top, and a small one one...
  17. 7

    Best bang for buck: SC or heads?

    For best bang for the buck,lets brake it down. Heads: will cost you about 1500$ for a set of heads, R/R's, gaskets. You can get about 40 hp on a set of heads on a stock motor. 1500/40=37.5$ per horse Supercharger: A standard but not the cheepest ( s-trim 8lbs boost ) you can find for...
  18. 7

    Turbo kits?

    Hey, just noticed your sig location is in Omaha. I also live in Omaha, And Rick that I mentioned above also is from Omaha, but just moved his shop out to Vegas for better business growth. He still does out-sourced work for HP Motorsports on giles here in Omaha.
  19. 7

    Turbo kits?

    A buddy of mine (Rick) owns a shop (TNC HotRods) that is currently working on my turbo setup. He is more than fairly priced, and the work is top quality. He's is a Percision Turbo dealer and does sells parts, not just kits so if you want to piece one together yourself. Check out the link...
  20. 7

    hertz shelby pics

    Heres is what most people will see.
Top Bottom
Back
Forums
Menu