Search results

  1. Hizzle

    393 stroker stock block?

    I've had it for a long time, it was either a 78 or 79. I'd have to go out and find the numbers off of it, will do this afternoon.
  2. Hizzle

    393 stroker stock block?

    I was going to freshen up the 5.0 in the 'Stang but I have a good portion of the parts to make a 393 stroker. For the 5.0 I purchased pistons, rods, AFR205 heads, and a new cam. I know I will have to use the 351w rods for the stroker. I have a late 70s 351w block that was just cleaned and if it...
  3. Hizzle

    Read this post about Mustangs on a Dodge forum. Called us RICE

    My buddy's ex-girlfriend's dog's original owner's cousin's 2nd cousin had a 80s something mustang that got beat by a Dodge D50 blah, blah, blah. They're all talk. I have no problens with rednecks, but they seem like the ones that give them a bad name. It's not even worth it to stoop to there...
  4. Hizzle

    Fox diet... and what do things weigh??

    mine was a lot louder when I pulled all the insulation and sound deadining stuff out even when it was the stock exhaust. Now with mac long tubes, pro chamber, and mac mufflers, I got rid of the cd player and speakers.
  5. Hizzle

    Is a Pro Chamber worth the $$$??

    if it's in the budget go with the pc. like 85 said, it's like a fat x. 100 isn't bad at all, heck I'd buy it if I knew where it was for that much. I have one on and know some guys who want one.
  6. Hizzle

    Does a K&N filter add 170hp???

    he must have the quad cam, tri-rotor, twin supercharged motor with the rotary forged chromoly pistons that was an option for that year.
  7. Hizzle

    86 earlier 1/4 window on 87+

    What he said, I was trying to figure out how to word it and Bingo! If you go the glass drilling tape 'em on route, they are gonna stick way out, too. I still have the glass, moldings, and sail panels off of mine if you want to try it.
  8. Hizzle

    86 earlier 1/4 window on 87+

    Nooooo. Definitely not.
  9. Hizzle

    86 earlier 1/4 window on 87+

    found my pics of doing the swap. Not all of the inside holes are pictured below, but you'll get the idea. Hope this helps. The older glass is installed from the inside and is pushed out with clips, the '87-93 glass is instaled from the ouside and screw in with studs on the glass...
  10. Hizzle

    86 earlier 1/4 window on 87+

    good luck, I put the '87 glass in my '86. You can do anything you want, it's just how much effort you want to apply. I'll go out and try to take some pics of mine and show the differences, it may be too dark. Then you can pull off your interior trim panel and take a look.
  11. Hizzle

    t-5 whine

    Ahhhh yesssss. I'm an idiot! :stupid:
  12. Hizzle

    t-5 whine

    ???:shrug:
  13. Hizzle

    t-5 whine

    If it's doing it when you push in the clutch, it's probably the throwout bearing even though you just replaced it. As far as when it's in 1st or reverse, mine started doing that a few weeks before it popped out of first gear when I stepped on the gas from about 5 mph. It's done that twice. My...
  14. Hizzle

    Another 5 lug swap question

    alrighty then. didn't want to pass up the deal "in case." Not a bad price for all that stuff, should be able to get it back
  15. Hizzle

    Another 5 lug swap question

    What about putting the '06 spindles on the car? This is probably a difficult topic because these parts are so new. I don't want to do any "clever engineering" (for lack of a better term) to get these to fit. I want it done right. I just couldn't pass the deal up and may sell the stuff.
  16. Hizzle

    Mass Air flow Conversion Please help

    Check the instructions posted in the link further up on the page, that's what I went off of for mine. Worked fine. As far as those pins, go to Auto Zone, they have them in stock in their electrical section. The 4 wire Harness I got already had them on it. You may need them if you do the...
  17. Hizzle

    Do you ever lie to impress people. Has an idiot ever lied to impress you?

    It's easy, you run chevy valves and forged rotary chromoly pistons. :rlaugh:
  18. Hizzle

    Another 5 lug swap question

    I know there are several threads about this topic but I am having a problem finding info on the brakes I got. I picked up some rotors, calipers, brackets, lines, and mounting hardware off of a 2006 GT. I want to do a 5 lug conversion on my '86 GT. I have checked several threads and sites and...
  19. Hizzle

    How do you all think this exhaust will sound?

    I'm not sure how set you are on BBK LTs but when I had mine they hung down a lot more than others. There are some posts on here saying the same thing. I DESTROYED mine on a speed bump that I used to be over to go over just fine with the factory exhaust. My Macs are up a lot higher and from what...
  20. Hizzle

    Have you seen me?!

    I saw it in a preview for Fast and Furious 3. Nope, haven't seen.
Top Bottom
Back
Forums
Menu