Search results

  1. N

    Thermactor Thermastor Solenoids neccessary?

    Are you talking about the air pump?
  2. N

    Thermactor Thermastor Solenoids neccessary?

    I have a mild 306. No cats no egr no smog pump. I'm trying to tie up some loose ends. I am not sure if I need these two solenoids, and if they should be plugged in or deleted and have the vacuum plugged. Any suggestions?
  3. N

    Bleeding my power steering is not working

    anybody?
  4. N

    Bleeding my power steering is not working

    How do I tell if the pump has pressure? Also I am guessing that the cap has to be off the pump? And should I be looking for big or little bubbles?
  5. N

    Bleeding my power steering is not working

    I recently put my car back together. The power steering pump was taken off as well as the steering rack. The steering on the car was super tight after this. I started the car a bunch of times and then read that I have to jack the car up and turn the wheel back and forth. Yesterday I did...
  6. N

    Pic Request 96-97 Cobra Wheels on Red LX

    ok I think I'm sold. Does anyone make replicas or do I have to find oems? I want the ones with black inserts.
  7. N

    Pic Request 96-97 Cobra Wheels on Red LX

    I'm looking to see if anyone has a pic of a red lx with 96-97 cobra wheels. If not any other color. Thanks
  8. N

    245/45/17 fit on my 5 lug conversion?

    ok thanks thats good to know. Now how wide of a wheel can I run front and back?
  9. N

    245/45/17 fit on my 5 lug conversion?

    I did my 5 lug conversion using sn95 spindles. I have a set of 245/45/17 tires. Will these fit ok? Will the stock width 94 -04 wheel fit? Thanks
  10. N

    Car runs fine one day next day backfiring?

    I went to check timing today and my timing light was broke. SO I have to get a new one. The car wasnt backfiring today. It did a few times but then it was ok for the most part. One thing I did notice is that the pcv valve had popped out of the intake. I guess if it is not backfiring all the...
  11. N

    Car runs fine one day next day backfiring?

    I bought the motor used. I put the rockers in and the intake and the pan. Motor had about 500 miles on it. It is a 306 11.1 compression. GT40 intake, windsor jr cast iron heads. It has 24lbs injectors and the maf is calibrated for it. It has the 70 mm throttle body. Stock style breather...
  12. N

    Car runs fine one day next day backfiring?

    I started my car the other day. Its a mild 306 GT40 intake heads. The car has started and run perfect at idle and reving it up. The car has not been driven yet. It has been run up to temperature and moved around the driveway. So I start it last night, and everytime I hit the gas its...
  13. N

    What size bolts for mid pipe to cat back?

    I just ordered my flowmaster catback. There are no bolts to connect it to the mid pipe and my mid pipe has no bolts. Anybody know what length stud and bolts I need to connect the two? Thanks
  14. N

    Having trouble with brake line to caliper bolts leaking

    I put sn95 brakes on my fox with the fox stock length axles and north race car brackets. I got a set of 1994 rear caliper brake lines to bolt to the calipers. Not sure of the year of the caliper its between 94-97. However the single banjo bolt is very tight into the caliper but it still leaks...
  15. N

    Vermillion Red Porno Red Interior what color carpet?

    I am putting my 93 LX back together. It is going to be Vermillion (Bright Red) and has a red interior out of a 90 GT. The dash is black and red. I also have a gloss black roll cage installed. Should I go with a black or red carpet? Anybody have any pics of these color combos?
  16. N

    Got my 4cyl conversion running. Have a few questions

    I will give these diagrams a shot. I was wondering that if the car is a 93 and I used the starter and wire out of a 90 like shown above, wouldnt the car still start? Another words its a 93 but the starter is wired like a 90.
  17. N

    Got my 4cyl conversion running. Have a few questions

    All of the switches are plugged into the safety switch. I did some thinking and looking and heres what I came up with. When I put the car back together I used the starter from my parts car which is a 1990. I also used the one wire that goes from the starter to the solenoid. Now on the 93 cars...
  18. N

    Got my 4cyl conversion running. Have a few questions

    still wont start from the key. I put the tranny harness in and plugged it in to the neutral safety switch and plugged in the harness to the last plug in the back of the tranny which I believe is the safety switch. Still no start with the key. Gauges turn on so does the fuel pump but no crank...
  19. N

    Plugging coolant crossover tube that runs to throttle body

    Ok I know this has no effect on horsepower. Basically I put my car back together and realized that the coolant line that runs from the back of the intake to the rear of the throttle body is blocked off. It is plugged at the rear of the GT40 intake. I do not want to take everythign apart...
  20. N

    Adjustable Brake proportioning valve recomendations

    I am going to be doing MJbobbits 3-2 conversion and it says I need a adjustable brake proprtioning valve. I know where to mount it just not sure which one to get, I want to make sure the lines all have the same thread when I bolt it up. Any help?
Top Bottom
Back
Forums
Menu