Search results

  1. RedBullitt

    Tremec 3650--what engines will fit?

    its a built in bellhousing im pretty sure, not an easy option to change it
  2. RedBullitt

    PO 136 CODE AFTER BUMP ?

    yeah its an annoying problem, you sensor should be fine. have you swapped the mid pipe, also, are the wires leading from the sensor up to the harness loose, hanging? i had the same problem for a long time, noticed my wires were not secured the way they were before the pipe swap, so i wired...
  3. RedBullitt

    saw a new stang with a blown engine, ouch

    i wouldnt think so either, either bad luck or the tune. maybe a little of both
  4. RedBullitt

    auto to manual swap

    gotta get the tranny harness, ecu (not necessary, you can remove the shift points if im thinking right,but if you can get one cheap may as well), clutch pivot ball, might need the little square dust boot for the bottom of the tranny over the fork, interior boot and rubber boot under that would...
  5. RedBullitt

    Which cowl hood is this?

    first pic looks more bulged in front, maybe its the angle
  6. RedBullitt

    Shaker!

    i say save the cash, i mean thats like 1/4 of a small blower. does look good though, i have to admit that . nice car ponyrocks
  7. RedBullitt

    methonol or intercooler??? can you guys explain?

    why not run both methanol and and front mount?
  8. RedBullitt

    Electronic PCV Valve?

    huh didnt know that, glad mine is just a regular one. try cleaning it maybe?
  9. RedBullitt

    Flywheel help...

    i have never had a problem with my aluminum one... but any you WILL pay for any aftermarket one. You can gain strenght with steel etc, but under any normal circumstances it is not necessary at all. really your stocker, like he said, will be fine. keep the cash for now and save up for some stuff...
  10. RedBullitt

    Gears and no calibration

    Hey everyone I have 410 gears installed and my speedo is set for them. thing is i am going to sell my predator (had a custom tune with it for everything) before i get my kenne bell and tune this spring :flag: . Will there be any adverse effects from running the car without the tuner, just in...
  11. RedBullitt

    First time at the track with Kenne Bell

    what kind of psi are you running, 9 or 14?
  12. RedBullitt

    side scoop inserts

    the inserts probably go in over top of the existing ones... but i will say you will have to take the existing black ones out in order to anchor the new pieces in. use a long flat tool, or screw driver to pop the pins holding the scoop on, be very careful of the paint and be patient, just feel...
  13. RedBullitt

    How much will it cost?

    no reason to, if you are smart you will not have issues with it. get a wet shot, gears tires and suspension. withought the spray, get gears, tires/wheels,minor induction mods or exhaust. Suspension and weight reduction are you your best friends.
  14. RedBullitt

    Does anyone make a smooth hood for 99-04 GT?

    that would be a cool look, different. i dont think i have seen one, but it should not be too hard with some filling and sanding before paint, just add work.
  15. RedBullitt

    Dealer says new intake gasket, how can he tell?

    never can tell with a dealer... lol has to be throwing some code (unless he actually looked at the intake) that is normally associated with a leak there etc. I dont know your dealer, so i cant knock him, but ill tell you i dont trust the ones around here one bit. Kinda funny, but scary: dads...
  16. RedBullitt

    anybody running a bassani catback with a offroad midpipe?

    i have bassani all the way back and i couldnt be happier with it, fits perfect, sounds great
  17. RedBullitt

    Engine has trouble Starting sometimes

    i have had some issues like this , but i think mine was tune related. before you started, turn the ignition on for like 3 or 5 seconds, it always started up for me right away when i did that lol. i dunno, worth a shot, may point you in the right direction
  18. RedBullitt

    Good 1/4 mile parts?

    tires/drag wheels, lower control arms, gears, any possible weightloss, drag shocks/springs, suspension is your friend. fairly cheap stuff, but consider nitrous, best bang for the buck
  19. RedBullitt

    clutch cable install

    its really an easy job, i dont have a write up or anything, but there is no reason you cant do it. one end of the cable loops over the quadrant and hooks into a notch, the other end below the car in a notch on the lever, beneath the dust boot on the drivers side of the tranny. its easy to get...
  20. RedBullitt

    Good UCA's and LCA's for the money?

    yeah i agree, after market uppers cause binding in many cases. definately go for the lowers, they do make a difference
Top Bottom
Back
Forums
Menu