Search results

  1. bradfier

    Nitrous Window Switch tunning

    Yes you can change the rev limit with a tuner, but why do you want to do that if you spraying? And that is the point of the switch usually set from 3000 to 6000, you may still be making power at 5500rpm just make sure you don't spray at low rpms
  2. bradfier

    Geting Butt Kicked By Z28!?

    It's not very often you line up against stock cars, if you have a lightly modified 4.6 pick your battles carefully, like 4.6s strength is high rpm ie roll races, red light races you'll lose most of the time because of the tremendous low end torque of the 350. and if you line up against a formula...
  3. bradfier

    Plasti Dip

    Yes I did the trunk to clean it up a little for the nitrous setup, I'll be covering it up but still not sure what I want to do.
  4. bradfier

    Plasti Dip

    Thought I’d show off what a little Plasti Dip. And this is the trunk of the stang, prepping it for N2O
  5. bradfier

    Spring mod thread

    ^^I bet he was thinking about some 33's and going mudding As for the spring mods ...
  6. bradfier

    back in the game...got some questions

    Congrats on the car, if it sounds like a ppiisssshhhh every time you push the clutch in check for a turbo :rlaugh:
  7. bradfier

    Lowering springs installed + new wheels

    Beautiful car! I wouldnt worry about the badges and the spoiler looks nice.
  8. bradfier

    Wipers Wont work and stock headunit will only show time (wont play radio/cds)

    Good info wmburns
  9. bradfier

    a/c blows dust in my eyes

    sorry dude no easy answers for this, I had a 96 that did the same thing, I think it was the foam stuff they put between the dash and the vents, it started to deteriorate and break away. It wasnt bad enough for me to worry about it, so I never fixed it.
  10. bradfier

    pecking noise???

    It's not very ofter someone describes their noise as pecking, and from that video it sounds a lot worst than a minor peck LOL. +1 Rod bearing
  11. bradfier

    Custom License Plate Ideas

    I was thinking about "3111a" its the section in the Pa vehicle code that doesnt carry points on your license.
  12. bradfier

    Time for a dyno tune?

    Glad you got a good tune! Did it take care of you spark knock? When are you taking it to the track, it would be interesting to see what the real difference is.
  13. bradfier

    weird engine tick

    +1
  14. bradfier

    weird engine tick

    I thought once you have a valve tap you always have it, but not sure. Did it start after you ran it hard, like at the track or something? If so, that is possible, but I never really worried about tapping that came and went, if it gets loader and more consistant I'd start thinking about bearings...
  15. bradfier

    weird engine tick

    How is your oil? Do you have good pressure, whenever I think of a ticking in the top of the motor I think of Lifters / Lash adjusters, but if you already replaced them and Tensioners, I'd keep an eye on the oil, you dont want to spin a bearing. And Welcome to Stangnet!
  16. bradfier

    SC with shaker system?

    Nahh Its cool, I'm fortunate enough to be able to play whenever I want, but I remember when I was fresh out of High School with a 95 v6 every penny I made went to that car. If only I knew what I know now, I would have done things a lot differently
  17. bradfier

    Time for a dyno tune?

    If BAMA starts blowing up cars they will get a bad reputation, most tuners error on the side of caution and run a little richer, but that's the problem with mail order tunes, you dont really know what you get. Look into a wideband air/fuel gauge, it will tell you what your motors doing at each...
  18. bradfier

    Time for a dyno tune?

    I know it sounds dumb but you’re putting in the correct fuel with the tune right? I had a 93 octane Dyno Tune by Johnny Lighting Performance and noticed detonation when I lugged the motor, I started mixing in 100 octane fuel and the detonation went away. I know you already said it but it sounds...
  19. bradfier

    SC with shaker system?

    Live it up while you can kid cause there will come a day of mortgage and diapers that will ruin all your fun ... err um (I just got smacked by my wife)
  20. bradfier

    4.10 gears installed... No traction?

    Comes with the territory, either lighten up on the pedal or uninstall all your bolt ons.
Top Bottom
Back
Forums
Menu