Search results

  1. F

    Oil?

    It has been proven that synthetic oil will not cause leaks. If you put in a engine that already has leaks the leak will get worst, but who would want to waste money putting good oil in a leaker anyway.
  2. F

    Oil?

    I use Amsoil. They are the ones who invented synthetic oil and they say there oil will beat any other oils on the 4 ball bearing test. Check them out at www.amsoil.com
  3. F

    What colour is "Parchment"?...

    I had Parchment colored interior in my 66 GTO and it was white with a tint of gold in it.
  4. F

    Polyurethane Lower Control Arm Bushings

    I tried the bushing in the freezer trick and it only partially worked I put the bushing in the freezer overnight and then put the sleeve in the oven at 300 degrees for 5 minutes,then gresed the frozen bushing and tried to press it in with the vise. It went in 3/4 of the way and then stopped...
  5. F

    Remove Quarter or cut out?

    See the January edition of Mustangs & Fords. The article name is Sheetmetal Mania. This should help you make up your mind.
  6. F

    66 wont crank, acts like battery is dead

    Check all your grounds and make sure they are tight and clean.
  7. F

    saginaw steering rebuild

    Try this website for steering box parts. They had everything I needed for my 66 Mustang. http://www.alamoclassicmustang.com/
  8. F

    ****attention**** all 4x4'ers..... TIRE CHAINS, pics and description of what to buy!!

    What does this have to do with classic Mustangs?
  9. F

    Polyurethane Lower Control Arm Bushings

    Has anyone ever installed polyurethane lower control arm bushings in a 1966 Mustang? The new bushings are made to press in the old bushing sleeve, so you have to remove the old rubbber out of the sleeve. I am having a problem pressing in the new poly. bushing, it keeps wanting to smush down...
  10. F

    upper control arm shaft replacement

    Thank you, I will try that.
  11. F

    upper control arm shaft replacement

    I got the old ones out and the threads are fine in the control arm, but my question is how to install the new shaft & bushings ? The shaft has threads and the control arm has threads also. Do you have to thread each cap on at the same time?
  12. F

    upper control arm shaft replacement

    I already have the springs & control arms out. I would like to know how to replace the control arm shaft & bushings?
  13. F

    upper control arm shaft replacement

    On a 66 Mustang , how do you replace the upper control arm shaft & bushings ? Is there a procedure or trick? :shrug:
  14. F

    66 Mustang lower control arm bushings

    I am replacing the lower control arm bushings and the old ones are offset. Shouldn't they be centered in the control arm? Also I am replacing them with the poly. bushings and the instructions says to leave the outer sleeve in and remove only the rubber & center sleeve. Does anyone know how I can...
View older results
Top Bottom
Back
Forums
Menu