Search results

  1. mity2

    Bad Wheel bearing...opinions

    Well, wheel bearing on rear is located on edge of axle tube on each corner. Its a $30 parts, and bearing itself is easy to change. But to get to wheel bearing is not easy. You'll have to remove: Wheel rotor caliper Axle and to remove axle, you'll need to remove C-Clip which is...
  2. mity2

    UPR k member kit

    I agree that if your car is daily driver, then tubeler K is prolly not a best idea. I was told that in case of accident, if adjuster notice tube k member, they can deny your crame(donno how true that is tho). Mine is weekend worrior. So while I still have to remain concern about it, but less...
  3. mity2

    bbk longtubes on a 2001gt.

    They don't fit. I have BBK, but if I'm gonna do this again, I would go with Mac LT(now that you can get them in ceramic coating), and get their PC mid. I had PC before i installed LT, and oh how I miss how PC sounded:(
  4. mity2

    UPR k member kit

    I've been considering tubeler K for sometime. Weight reduction/room to work on lower engine are main reason. But i do not want to go with coilover as I hear many good story, as well as bad story. like being noisy as such. PA racing makes one that allows tubler A-arm with spring purch so that...
  5. mity2

    Highest maintenance Ford color?

    trueblue isn't much better then Black. Some wax are just impossble to get streak out from it.
  6. mity2

    Cold air kit is it worth it?

    waste of money IMO. If he feel he MUST change it, I'd just replace it with C&L tube, and dropp K&N and call it the day. It look much better that way anyhow.
  7. mity2

    My Mustang came from hell...

    I feel your pain my clutch blew apart a while back. happened between 2nd and 3rd shifting. Then after putting SPEC clutch in, TOB failed after 36miles, off comes trans again. then after that, passenger side header gasket blew about 50 miles later. that was fun summer....
  8. mity2

    5.4 swap starts tomorrow

    I thoght the big issue with 5.4 swap is that: Intake don't fit You get big torque increase, but not enough HP gains, but because most 5.4 is tuned for lowend power, you basically lowend torque monster that run out of grant as RPM increase either way, be sure to document with plenty of pics!
  9. mity2

    Trying to get a more aggressive stance

    Looks like he just noticed Rader trap up ahead:notnice:
  10. mity2

    Automatic Gauge Sweep?

    you cut the constant power to cluster, your PATS not gonna work anymore:nono:
  11. mity2

    Dome light wont turn off

    chit happens man
  12. mity2

    Just some thoughts on few things in my car

    yeah thats the odd part. both crogged at the same time... But then in 3 years, who knowz?
  13. mity2

    Just some thoughts on few things in my car

    well, mine is already cracked in 3 places from when I installed FRPP STB. THere is, however, way you can remove cowl without cracking it(I wish I knew then). Its time consuming tho. You simply remove both A-piller panel. To do this, you'll have to disassemble A, and B piller interior...
  14. mity2

    Just some thoughts on few things in my car

    I took my car out for the first time since I scraped front bumper week or so ago today. I dicided to take the car out to carwash. While I was there, I figure I'll give my wiper a workout. To those of you don't know me, I do not take my car out on rain. So i never use my wiper. But I run it...
  15. mity2

    I finally done it....

    Well, yes. If I am to fic it, it'll be less then $100 I'm sure. And if you look hard enough, you can see it from top, as edges are scuffed up. But then again, it can prolly sanded smooth. And yes Cat is at least happy(Know that by him not pissing on my loundry...)
  16. mity2

    bbk 4.6 intake manifold

    This made think that thats not an idividual throttle body. I wonder if it could be more like old variable intake like an old toyota TVIS they used to have in their mighty 4A-GE in the pre days of VTEC... My old MR2 had it, and it grately helped low end torque by manipulating intake charge...
  17. mity2

    First Tattoo...

    looks like you got pimples all over your back. Not to mention you need to work on your tan...
  18. mity2

    I finally done it....

    i know its not as bad as some of the other's. But the point of it is that I kept front bumper scratch free for 3 years. And now this...... :mad:
  19. mity2

    bbk 4.6 intake manifold

    but with individual throttle valve, its gonna need ECU tune too won't you think? stock rail prolly not gonna work either. But this one may actually produce some power(more then few like others). And being cast aluminum, I can prolly polish the hell out of it too...
  20. mity2

    I finally done it....

    my car sits about 4inch off of ground. I guess I was "just" high enough to clear bump on my driveway. 150lbs and passenger was just too much i guess...
Top Bottom
Back
Forums
Menu