Search results

  1. raz54

    Exhaust Leak

    Good deal, hope the epoxy holds up. If I ever have this problem I'll try liquid steel so let us know how it's holding up OK.
  2. raz54

    Exhaust Leak

    Hey '66 coupe's that's great, nice looking vert. vmurh. Did you have to remove the header to do it?
  3. raz54

    Radiator plug broken help!

    I would pull the radiator to get to it better first, then you might be able to get some needle nose pliars on it to get it out.
  4. raz54

    Exhaust Leak

    Ouch! That really sucks. Hope she has insurance.
  5. raz54

    Exhaust Leak

    Nope never heard of anyone patching them before but it is commen for the passenger side to crack and it is because of the AC dripping on it. You can always put on some good shorty headers if they keep cracking.
  6. raz54

    tranny question

    I always heard it was the same in both cars. How would you be able to tell them apart then if they have a weaker version? All it says on it is T5.
  7. raz54

    94 3.8L Need Help!

    Have you checked the fuel cut off switch, it might be tripped? Mine is in the trunk on the left side.
  8. raz54

    Having misfire issues ( I think) on 00 PLZ HELP!!!!

    Well that's a whole lot better than a burnt valve. Glad you found out what it was and it was nothing serious.
  9. raz54

    Modified Crossmember for Posi

    I think it's the same gear oil. You might check out Chip's V6 before you order. I paid $200.00 for my t-lock and friction modifier and that included shipping from them. He also sells gear sets. You're going to love the t-lock. The best mod I've done so far was that. Yep, that's the girdle I was...
  10. raz54

    Cold Air Intake Upgrade

    That is weird and I've heard that from lots of people. It seems to be mainly the K & N CAI that has that problem. My personal beliefe is the shape of the K & N is why. The K & N is not the same size, it has a wide section and I think the air moves around too much then where the other CAI's are...
  11. raz54

    Modified Crossmember for Posi

    Do you have a link for the cross member? If you are talking about a braced diff cover then yes it will make the rear end a little stronger. I would get the synthetic gear oil myself, it's #01300. Dyno test have shown a 10 hp gain at the rear wheels with all synthetic fluids. You'll need 2 qts...
  12. raz54

    Having misfire issues ( I think) on 00 PLZ HELP!!!!

    0 ? Did you remove all the plugs before testing and then crank it over several seconds? What was the readings for the other cylinders? You need to find out now if it's rings or a valve. If it wasn't smoking I would say a bad valve.
  13. raz54

    Cold Air Intake Upgrade

    My CAI worked fine without the screen too but when I went back to the stock intake and a K & N filter and no silencer I forgot the screen and it didn't run right at all. Put it back in and runs great again. I thought it was to catch anything that might get in there but it's to stabilize the air...
  14. raz54

    Modified Crossmember for Posi

    First off a "posi trac" is for Chevy's (GM), t-lock is Ford. You can either buy all the parts and have a shop install them or let the shop supply them. Basicly it's bearings, races, crush sleeve and shims. The bearings alone are about $50.00, if you get the install kit all the shims and every...
  15. raz54

    plz help

    Is it throwing a code (check engine)?
  16. raz54

    Cold Air Intake Upgrade

    OOPs
  17. raz54

    Cold Air Intake Upgrade

    The MAF is inside the big plastic housing being held in with 2 screws. Just remove it and bolt it to the CAI. Don't loose the screen though, you might need it. A lot of guys (including me) had irratic idling and stalling without the screen so you might have to reuse it.
  18. raz54

    T5 blows

    It's noy fully disengaged then, the fingers are probably bent or a spring is hanging up. Sounds like you need some clutch work.
  19. raz54

    Irritating Problem with Idle

    I see you cleaned the IAC but it still could be sticking and that will cause it to run like yours. My nephew was telling me a couple days ago that Fords had a problem with them going bad. They don't cost too much so you may want to try one.
  20. raz54

    Irritating Problem with Idle

    You didn't remove the MAF screen did you? The idle will be very irratic and can die without it.
Top Bottom
Back
Forums
Menu