Search results

  1. 1

    cheap driveshafts

    NO YOU DO NOT. just torque the flange nut to 40 foot pounds The pinions depth is set by the shim that is under the pinion bearing all the crush collar and the pinion flange and nut do is allow you to set the correct preload on the two pinnion bearings. The crush collar sets the preload and...
  2. 1

    cheap driveshafts

    a shop local to me sells 05-06 mustang aluminum driveshafts complete kit shaft plus new pinion flange and the bolts all ford parts for 549.00 let me know if anyone would like me to hook them up with the number.
  3. 1

    KENNEBELL SUPERCHARGER 05 GT

    its not a gamble if its done right. any car that let go at 8 psi needs to have the tuner shot. i make 538 rwhp with a 11 psi intercooled novi 2k ON A MUSTANG DYNO and have for over 7000 miles now i drive my car hard all the time. these motors when tuned properly will live long lives at...
  4. 1

    KENNEBELL SUPERCHARGER 05 GT

    not gona happen at 8 psi expect 430 ish rwhp from a kb setup
  5. 1

    Vortech Supercharger

    any of them work just fine any of them will work just fine .. I sell all three and can hook you up with anyone of them. 210-655-6546 for example my car i jsut retuned it on a mustang dyno The car previously made 523 rwhp on dynojet but the timeing numbers were rediculously safe and...
  6. 1

    KENNEBELL SUPERCHARGER 05 GT

    WRONG effeciency is a measurement of how much a given compresor heats the air per psi it is compressed and centri blowers heat the air LES then a screw type compresor.. Effeciency has nothing to do with how or where in the power curve the boost is made
  7. 1

    KENNEBELL SUPERCHARGER 05 GT

    No a kenee bell is a twisted screw type superchargers that is different ( and less efficient ) then a centrifical :)
  8. 1

    2005 billet fuel door?

    im cosidering the black anodized one for a black car but only that the chrome and brushed look bad to me
  9. 1

    Rear end tubbed

    remove the rear sway bar and you can fit a 15 x 10 wheel with easily a 29 x 10.5 slick or drag radial tire.
  10. 1

    Big Brakes for Front - Best Bang For Buck?

    http://www.steeda.com/products/gt_front_brake_kit.php the bear kit is by far the best bang for the buck it uses a 14 inch rotor and a caliper off a z06 corvette wich is no joke of a caliper .. this kit cost only 1 k and will give you 99 percent of the improvment the 2500$ plus kits will...
  11. 1

    Did Evolution Performance rip off my buddy?

    there is no mass air metter option for 05 06 cars when useing a xcal2 this is only available on the SF flash device and it is not what you get when you order a custom tune and mass air kit. i personaly tune cars with xcals2 and we limit what the customer can do with his as well in order...
  12. 1

    4 gauges vs. 6 gauges

    wrong .. the temp guage is a full scale gauge.. it does reflect actual temp .. i have personaly over heated my car once by forgeting to plug in the fan when i removed it to put on my under drive pulleys and the guage did and does increase when the engine temp does i watched it slowly climb while...
  13. 1

    Last word on whether Ford can tell if software has ever been changed?

    WRONG the dealership can and some times will refuse waranty work if it feels your car has been modified .. mike murillo himself had a 4 month fight with ford over the engine in his brand new 05 f-350 wich went out at 15 k miles ! after parking it with it runing fine he came out and it...
  14. 1

    3 Valve exhaust vs. 2 Valve exhaust....Help

    the 05 cats are HUGELY sound absorbant for some reason as soonj as i went to long tubes with no cats OMG my car is is loud and mean sounding when your on it. also the cam profiles and the exhaust valve design change the dynamics of the exhaust pulse so no mater what you do it will never...
  15. 1

    bfgoodrich vs. nitto vs. pirelli

    well tire if for you size is also going to be a issue i went with the kdw because a 295 X 30 X 19 rear and a 245 X 35 X 19 front is same height as the stock tire and i couldnt find any 315xmm 19 inch tires that were the stock tire height for the rear and since NO ONE makes a 19 inch drag...
  16. 1

    Rear end tubbed

    what would you need to tub it for you can fit a HUGE tire in it with a coil over conversion the stock wheel well should hold a 29 10.5W no problem. that said there are universal kits and any competent shop would have no problem useing them on a 05
  17. 1

    turbo turbo turbo

    as has been said before.. that guy has enough mods in his motor to run a low 11 all motor.. and the kit has been modified its not a stock sts kit etc. stick a properly designed kit on a STOCK gto and it will run mid tens. and make more power then that car does on a other wise STOCK car...
  18. 1

    What trap speeds from procharger and KB?

    the kb kit will make 800-850 at the flywheel with race gas been done many times on the 4 valve cobras.. but you will need a built motor and the boost levle woudl be rediculous in the upper 20s
  19. 1

    What trap speeds from procharger and KB?

    they are not even CLOSE the saleen does not nearly have the potenti!l of the KB the inlet system on it is very restictive the intercooler is absolutly tiny as well. the saleen will NEVER make 700 rwhp you would have a hard time goign much passed 500 with it. the 9-10 psi pulleys on the...
  20. 1

    Adding a Sub to 2006 Stang

    one of the most notorized stereo shops in the country custom sounds tried to use a very nie high dollar line out converter on my car .. the stock head unit blew up and they have to give me a alpine head unit. they have no idea why it happened either. that stock head unit is finiky as all...
Top Bottom
Back
Forums
Menu