Search results

  1. dastang2

    misfire after intake install(heater hose nipple broke)

    i thought that this could be the issue on cylinder 5 since it was next to the water port and the head had some pitting but #2 is not near a water port so i don't believe that is the issue here. thanks.
  2. dastang2

    misfire after intake install(heater hose nipple broke)

    misfiring 4.6 bad head gasket or rings go to this link and check out the thread
  3. dastang2

    The end all be all cam thread.........

    so if you are using stock uncut pistons on a 98 with those 274 cams, can i do that with the 274ah cams on a 2000. will these cams work good with a blower and can i degree them without adj. gears.
  4. dastang2

    99 cobra overheating when getting on it

    the entire engine is what i am after. do you mean this motor or that year all together. i am wary on this one. that is why i want to go check it out before i do anything. i want to put it in my convertable. if i could just find somebody with some stage 2 cams that i don't have to cut pistons for...
  5. dastang2

    putting a stall and long tubes on 2000

    i am thinking about getting the cobra motor and dropping it in.what gears should i get for a blown 4 valve with this stall
  6. dastang2

    99 cobra overheating when getting on it

    i have not seen it yet, i asked about water in the oil but he failed to tell me that again. i am awaiting a phone call. i also asked if it made any engine noises and he said it makes a slight tap for a second when first started. is this bearings, or do these motors do this. who it may have been...
  7. dastang2

    99 cobra overheating when getting on it

    there is a 99 cobra motor for sell near me but he said the head gasket is blown because when he gets on it, water gets pushed out and temp rises quick. how easy do these blocks/heads warp and crack. what are the odds that i can just throw gaskets on it and it be fixed. he saids it still runs great.
  8. dastang2

    putting a stall and long tubes on 2000

    i dod all my own work, it's what i do. i also do sidework if any of you are in my area. houston tx
  9. dastang2

    putting a stall and long tubes on 2000

    if i was to put a 99 cobra motor in this, would this stall still be good to use or would i need a lower stall speed what about ported heads and a cam swap with aftermarket intake.
  10. dastang2

    Exhaust Tip Size

    i had some 4 x9 or 10's on mine, looked great
  11. dastang2

    putting a stall and long tubes on 2000

    what is wrong with the shift kit. i did the j mod on my trans now and like it. but my trans is going on his car and i am getting his along with the stall. also i have not been on a dyno. on a b&m shift kit does it keep the stock seperator plates or no
  12. dastang2

    putting a stall and long tubes on 2000

    410s are the plan
  13. dastang2

    need help notchback stalling.

    you need to check fuel pressure and check cats for any clogs.
  14. dastang2

    putting a stall and long tubes on 2000

    i just pulled the trans yesterday. i am putting a 3600 stall and long tubes with o/r h on the car in a few weeks. i the trans has a b&m shiftkit in it and not sure what else has been done. i have stock 3.27's on a full weight convertable. what can i expect of the performance i will gain. i have...
  15. dastang2

    just visiting with pics

    awesome you know i was in liberty yesterday at txdot doing some work to the trucks. i went to the mexican food place next to sonic. the chips there suck. you should come out to the shiner cruise that westside mustangs has put together. it is today but got to be in katy by 745 am.
  16. dastang2

    just visiting with pics

    i live in shepherd which is north on 59 of houston but work all over houston. i have a service truck and do road calls on trucks. i go to the 2920 meet and texas borders on fry road on thursdays.
  17. dastang2

    just visiting with pics

    i am thinkin it's a dragonfly
  18. dastang2

    just visiting with pics

    i just bought an hid kit for the h1 bulbs in the projectors. the halo's are awesome at night
  19. dastang2

    just visiting with pics

    i am going to remove spoiler and see what it loks like without it. not realy sure a convertable would look good without one.
  20. dastang2

    just visiting with pics

    these are cheap ebay headlights and suck ass because the wiring inside them is not that good. they are flush though and look cool. these pics from a phone to though.
Top Bottom
Back
Forums
Menu