Search results

  1. wildmandave

    Speedometer quit working

    He is asking if the odometer is digital or analog on the dash when you are looking at it.It is quite common for these to fail as I have found out myself. The gear is cheap that runs the odometer/ speedometer but there is a kit out there with better gears (they are molded instead of being...
  2. wildmandave

    miss on 2 cylinders

    Any efi techs out there?
  3. wildmandave

    miss on 2 cylinders

    Yes
  4. wildmandave

    miss on 2 cylinders

    Yes and pulled the distributor several times to check to make sure it was on time also.
  5. wildmandave

    miss on 2 cylinders

    Pulled wires on the cap while running with insulated spark plug wire pullers and listened for the engine to drop power. If no change than theres the dead cylinder.
  6. wildmandave

    miss on 2 cylinders

    I just installed a new 351 in my car and it has a miss in 2 cylinders. I've narrowed it down to #3 and #6 cylinders that are not producing power. It has spark and there is compression at both cylinders but I don't have a gauge to check how much. This guy I work with said I may have a bent...
  7. wildmandave

    hunting for 2 lucas 38# injectors

    Found a set of 42# injectors.
  8. wildmandave

    Msd blaster coil getting no spark!

    Need more info (year,model,etc.)
  9. wildmandave

    wheel bearing issues

    Cheak the rotor for excessive wear, scoring, or turning blue from excessive heat(from the brake riding the rotor and not releasing).
  10. wildmandave

    wheel bearing issues

    Have you checked the brakes? Sounds like a caliper hanging up(not fully releasing). If you are sure the brake checks OK then replace the bearing. Usually when the bearing wears you can feel it in the steering and if you jack up the car and put it on a jack stand you can check for play by...
  11. wildmandave

    wheel bearing issues

    I've done my homework and checked the haynes manual because there is no cotter pin/castle nut and I want to torque it to spec. The book calls for 221 to 295 ft.lbs. I installed the bearing yesterday and it still clicks when I turn right! I need to source a better bearing I think.
  12. wildmandave

    wheel bearing issues

    They sound like a clicking when you take a corner like on a front wheel drive.
  13. wildmandave

    wheel bearing issues

    I bought hub assemblies from auto zone $50 each. No packing grease necessary as they come sealed. Sounds like planned obsolecence to me as I prefer to pack the bearings myself. Not sure what the torque spec is though.
  14. wildmandave

    wheel bearing issues

    I installed some Weld prostars on my car a few months ago. Since then I have gone through 2 sets of wheel bearings on the front. I must use spacers with the front wheels to clear the brake caliper. The wheels are 15x 8 on the front and I'm not sure about the backspacing (they were on the back...
  15. wildmandave

    good coil, no spark- what gives?

    replaced TFI, is fixed.
  16. wildmandave

    no spark-good coil 95 cobra

    Replaced TFI today, it was bad, car started right up! :nice: :cheers:
  17. wildmandave

    idle problems

    check for codes and go from there probably a sensor ECT,IAC, TPS or may be O2's
  18. wildmandave

    hunting for 2 lucas 38# injectors

    Please see my last post under need TFI module. Sorry to have you go to all this trouble but I'm kinda new to this and I hit new post instead of new thread. I hope to work out all the bugs in my ride soon so I can get it legal and enjoy it because I've been working so hard to make this dream...
  19. wildmandave

    need 95 tfi module

    anybody know where I can get 2 injectors? I fixed my screwed up ignition, now back to my first problem that I was trying to diagnose before the TFI went south. Let's see the engine fired up and I'm getting spark to all 8 cylinders, but I have a miss on number 3 and number 6 cylinders, so I pull...
  20. wildmandave

    need 95 tfi module

    Got TFI module worked great now I have other things to work on like 2 cylinders missing. O well, I hope its a quick fix.
Top Bottom
Back
Forums
Menu