Search results

  1. R

    newbie w/pics

    Stay true to your "GTS Roots." Say "NO!" to spoilers. The car looks sweet...
  2. R

    Nitrous line routing question?

    Like stated above...to be "track legal" it should be outside the car but if you're just running test and tune most tracks to 'tech' the inside of you car. I mounted my bottle to the spare tire cover in my trunk so i can take everything out of their when i need too. Its not the most "secure"...
  3. R

    spout question

    So are you guys taking the spout connector OUT and then setting your timing to 34-36 base timing by what is on the harmonic balancer? And this doesn't "jack" anything up? Interesting....no CE Light either?
  4. R

    Wheres a good place to buy 3" or 3 1/2" tailpipes?

    Don't do that. I don't have the URL but Mustang Racing Technologies has new 3 1/2" Chrome Rolled tips (you have to swap the hangars off your car's pipes to a 99 and up style though) and so does Chicane Sport Tuning. I just bought a set of the black chrome ones from MRT for my car. I think...
  5. R

    Car goes into diagnostic mode on start up.

    Any guesses? For about a week straight after putting in my C&L MAF Sensor, Throttle Body, Long tubes, Pro-Chamber, 2 Chamber Flows, Adj Fuel Press. Reg., and 24lb Injectors (yes the maf is cal'd to them), my car was throwing the check engine light at me all the time with really horrible drive...
  6. R

    EGR Tube!

    Very easy fix...if it is just the tubing itself. If you need to replace sections of it, use copper tubing from a hardware store. The EGR Tubing doesn't get nearly as hot as the headers do except for maybe where the tube comes off the header. When I put my long tubes on, i used a hack saw to...
  7. R

    Anyone put Exhaust on pass. side like Nascar?

    They don't make a "kit" persay (well spintech's side exhaust but thats both sides) but with all the stuff they have, I'm sure you can buy the parts you need. If you're handy with a welder, some madrel U-bends and tubing and you'll be money. I have seen a set up like this for a 95 Cobra R...
  8. R

    Anyone put Exhaust on pass. side like Nascar?

    Bla bla bla blackpressure. Ultimate FLOW makes top end breathing easier (I.E Open Headers, Big Tubing, etc.). The diameter of the pipe sized...JUST RIGHT...will make velocity or speed up the gasses creating a scavanging effect (similar to vaccum) which in turn will produce a nice lowend on an...
  9. R

    What sparkplugs to get?

    Platinums are garbage. Don't use'em. Go with what everyone knows...Motorcraft or Autolite. If you're feeling froggy then jump for some NGK or Denso Iridiums. The platinums may work fine in an all motor app. but I toasted 2 of them on 2 gear pull spraying 125shot. stay away from them.
  10. R

    Rear Brakes

    AHHH!!! THE BRAKES ARE THE SAME SAME SAME DAN YOU ALL. The cobra rotors are vented and the gt's are solid. SAME DIAMETER. COBRA PADS A BIT THINNER TO COMPENSATE FOR THE THICKER VENTED ROTOR...THEY ARE A DIRECT CHANGE OVER. MAYBE the calipers are different but if you still use your stock GT...
  11. R

    94 Cobra- Can I get into the 13's without major engine mods?

    If that car is in decent shape...it should hit high 13s out of the box.
  12. R

    where to buy sensors?

    I don't know where I bought my o2's from. there is a place like o2sensors.com or something like that. As for the gears and nitrous lines...well, I'm a U.S. Marine and while packing up all my crap to move out (i lived in the barracks...they don't look to highly on having car parts in your...
  13. R

    Rear Brakes

    sldghmr...to answer your question...yes to all. You can still fit a 15 incher in there. I've ran 15" v-6 wheels on my 94gt and the the brakes are the same between a cobra and a GT. its the fronts that have clearance problems on a cobra....which is why they come with a 17" space saver spare...
  14. R

    where to buy sensors?

    anyone know of a place online that i can buy under hood sensors like TPS and the intake air temp sensor? I lost my intake temp sesnor (along with my nitrous nozzle and 3.73 gears...i'm a putz). thanks!
  15. R

    Rear Brakes

    yes...the only difference is what was said above....the cobras are vented making them slightly thicker but the calipers and pads are the same. throw em on there. I researched this alot before. got different answers everywhere. finally I met a guy with a cobra and We yanked wheels side by...
  16. R

    Old magazine tests for 94-95 GT's

    14.2 at 99mph with just underdrive pullies, homemade cai, and hacked off the mufflers....on a 275 40-17 Radial Tire...with 110,000 miles on it. Is that wierd?
  17. R

    1/4 mile time for a stock 94 GT V8 5.0L?

    I know someone might nay say on this but I ran a 14.2 at 99 mph with a 5spd. Not totally stock but nothing big. Pullies, CAI, and I yanked the mufflers off at the flow tubes (I was a broke 19yr). Of course this was in good air and ice on the intake for a about 30min. Also it was done with...
  18. R

    '99&+ rear bumper on '94-'98 Possible?

    that car is HOT! Mrbodykit.com sells them. Not sure who else. You can get it from mrbodykit for less that 700 bucks right now for xmas. I can allmost promise thats going to take some adjusting though. It looks awesome though when done. I'm a fan.
  19. R

    Black around the license plate

    hey 2l8ulluz2 is that shop in Durham, NC? I saw the plate and I thought I recognized. where abouts in NC are you from? Oh yeah, I'm still staring at the black out pics to see if i like em or not. not sure yet.
  20. R

    Lets See Em. White Mustangs!

    awesome pics guys...I'm drooling over here
Top Bottom
Back
Forums
Menu