Search results

  1. 84Ttop

    Oil Pump Gears Or Harmonic Balancer?

    absolutely, as far as I know MMR is the only outfit that makes a 2015+ crank sprocket in billet. The stock crank sprocket is made of the same powdered metal that the stock OPG's are made of.
  2. 84Ttop

    Holley Intake Manifold

    Actually, I'll be pretty annoyed if it doesn't make 800 hundred with the stock bottom end. How long it will last that is a whole nother story...
  3. 84Ttop

    Oil Pump Gears Or Harmonic Balancer?

    Don't forget to replace the crank sprocket too LOL
  4. 84Ttop

    Welding: How Did You Learn?

    I have countless hours of welding and am 100% self taught with zero formal training. Some instructional book throughout the years pointed me in the right direction but there will never be a replacement for thousands of hours of practice. Just this weekend I spent 6 or 7 straight hours welding...
  5. 84Ttop

    Holley Intake Manifold

    So after test fitting or trying to this intake is garbage... Unless of course I want to spend 6 hours with it clamped in a milling machine squaring the flanges, machining the fuel rail stands and throttle body mount. Nevermind reinventing the blower tubing and eliminating all of the emissions...
  6. 84Ttop

    Oil Pump Gears Or Harmonic Balancer?

    It's a real PITA to install the gears, especially being a blower car. Personally I bit the bullet and did the gears, I have reused the harmonic balancer fwiw.
  7. 84Ttop

    Resource Discussion Post Your S550 Track Times Here

    Well this is unfortunate... Time to put it on jack stands and take a look!
  8. 84Ttop

    Hellion Twin Turbo Install And Now Maf Issues

    Was the harness cut and spliced at all or is it stock length? I've also seen poor solder connections give issues when harnesses are extended. Have you tried to call Urist to see what there take is on this?
  9. 84Ttop

    Build Thread 1978 Mercury Cyclone. The pig is in the pen.

    http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&toolid=10001&campid=5335821607&icep_item=390193431094 It's a little pricier than I would have imagined but by far the right emblem for your grill Mike
  10. 84Ttop

    Gasket And Bearing Choices

    No issue in using a 4.030 bore head gasket on a 4.00 bore. The cometic gaskets are the best imho, the Ford Racing SVO MLS gaskets have also worked well for us in the past too. Keep in mind that Cometic is all built to order to there may be a wait on gaskets. Buy standard size bearings, when...
  11. 84Ttop

    Paint and Body Adjusting Rear Hood Hinge...

    ^^ This exactly, I wouldn't mess with the hinges or any body panel on a new car.
  12. 84Ttop

    Forced Induction Goodies...

    Nice! Time to get this thing tuned and shred some tires :)
  13. 84Ttop

    Moving From Porsche To Mustang, Seeking Reliability And Simplicity

    What type of changes are you looking to make that will require work? The car is very serviceable in general, what is the intended purpose of the car? Street cruiser, drag race, road course? I think you will find the S550 platform most near to the handling characteristics that your Porsche had.
  14. 84Ttop

    Hellion Twin Turbo Install And Now Maf Issues

    Is this a blow through or draw through MAF? In know in the coyote blower applications I use the stock sensor in a blow through 4" housing. I also use a honeycomb before the MAF to straighten the air for a better signal. 11psi and 676rwhp and zero issues.
  15. 84Ttop

    Build Thread My Never Ending 89 Notch Thread

    sorry for the hijack @TOOLOW91 Atleast I didn't mention Doritos Locos Tacos, oh wait... @FoxMustangLvr @mikestang63 @srtthis
  16. 84Ttop

    Build Thread My Never Ending 89 Notch Thread

    Sorry Mike, I couldn't hear you over all that HP I was making... :uzi: :burnout: Are the numbers big enough to read? I mean it was after a 30 mile drive in the heat of the summer, I don't mean to disappoint! @MikeH686 is a bully :cool: lmao
  17. 84Ttop

    Build Thread My Never Ending 89 Notch Thread

    Love me a good midget hooker... just sayin'
  18. 84Ttop

    Wheels-Tires What Are The Widest 20" Front Tires

    Niche Vicenza 20x10" and Thank you!!
  19. 84Ttop

    Build Thread My Never Ending 89 Notch Thread

    Badass for sure Jeff!! Congrats on making some moves at the track!
  20. 84Ttop

    Build Thread My Never Ending 89 Notch Thread

    Boo..
Top Bottom
Back
Forums
Menu