Search results

  1. Numbles

    Fuel Pump Relay

    Anyone nkow where the fuel pump relay is on a 93 lx. I remember hearing it was under the passenger seat but that might have been in my sn95 days. Any help would be appreciated. BTW, there is non under my passenger seat so it has to be somewhere else. The only thing under there is the amp for the...
  2. Numbles

    Can you use the 1998 mustang spindle's on a fox

    You can. However dont run wider than an 8" rim in the front or it will most likely rub on the back of the control arm. The 96+ spindles have an 8mm wider front track. I have them on my fox and the work fine.
  3. Numbles

    Brake Proportioning Valve

    WIL-220-0628 I found these on summit. Its the only 1/8 npt fitting available. Is it the correct fitting for FMS brake Prop. valve on a 93 lx.
  4. Numbles

    Brake Proportioning Valve

    I just tried installing the FMS brake prop. valve in my 93 lx and the lines thread in but dont seal. Does anyone know the adapter fittings needed to get this to bolt up and seal properly. The valve doesn't use an inverted flare (?) wheras the stock lines do.
  5. Numbles

    How is the steering supposed to feel on a 5.0?

    The difference is like you stated. Better feel for an autocross driver or roadcorse driver. They bolt right up but you need new steering shaft or a wrag joint adapter.
  6. Numbles

    How is the steering supposed to feel on a 5.0?

    If you want alittle more road feel and effort with your steering then you need to switch to an sn95 rack. Usually you need to do this anyways if you go to a 5-lug setup with 96+ spindles.
  7. Numbles

    recommended lph fuel pump?

    How much does it heat it up?
  8. Numbles

    Fuel Line Question

    ttt, anyone?
  9. Numbles

    Fuel Line Question

    What are the return and feed line sizes for a 93 fox car. I remember them being -6 for return and -8 for feed but cant remember. On summet I came up with a few but couldn't figure which ones I needed to connect to the factory hardlines. RUS-640870 -6 RUS-640880 -8 Would I need...
  10. Numbles

    Need New PS Rack. AGR Any Good???

    ttt interested in the same info.
  11. Numbles

    how much hp through stock T5 and with what clutch?

    Dont power-shift and you will be alright. My stock trans went 200 miles after a King cobra clutch was installed with power shifting. On a bone stock car with ntto street tires.
  12. Numbles

    1995 Cobra 5.0

    They run about the same. It will come down to driver and who gets the jump on the starting line.
  13. Numbles

    Lightweight rims?

    I dont think you will see a gain at all with lighter wheels with the exception of going to a slick and 15" welds like stangfreak mentioned. Pick what you think looks good and if your wooried about performance the ride on slicks and skinnies all day.
  14. Numbles

    What does Index the bellhousing mean?

    Take killer's advise. I even had to index my mcleud as it had .011 runout. And the indexing sticker on the bell had the numbers at .01 and .005. They were wrong.
  15. Numbles

    When do you need to upgrade cooling system?

    Maybe. Youll have to sit in traffic to find out. If the temp rises while sitting or cruising and the cooling system cant keep it cool then you need to upgrade. FWIW I have an aluminum radiator im looking to sell if your interested. PM me if interested.
  16. Numbles

    Rear main seal

    In my experience if it isn't leaking just leave it. But yeah you can do it while the motor is in the car.
  17. Numbles

    QA1 A-arm and QA1 k-member alignment help

    Go to maximum motorsports website. They have a full write up with pictures.
  18. Numbles

    Twin kit progress pics.

    lol i was just going to post that link. hows the fit on that hood. go-stang50 got a CF hood from them and it didn't line up well with the fenders (sn95). But keep in mind that isn't their production hood. That hood on ebay will only be able to be pinned on. No hood latch or hinges.
  19. Numbles

    cobra brakes...

    13" Cobra brakes fit behind all 17" factory ford wheels.