Search results

  1. TurboDoctor

    count your pesos

    just one of mexican mustangs i have ran across in just a few days http://www.mercadolibre.com.mx/jm/item?site=MLM&id=5171273
  2. TurboDoctor

    Tube chassis vs. stock frame

    I used .083" 2x3, that is what almost all after market frame rails are made of. since I dont not have a bender for rectanguler tube, I cut all the bends on a band saw. It took me a long time and some trial and error finding angles. Jiging up the frame also took some time. I had to move pieces...
  3. TurboDoctor

    Tube chassis vs. stock frame

    My frame is made from 2x3 as well. I have set the body on and it looks really good, you cant really see mush of the frame under the car unless you back up aways. I have not got a rear end yet so im noy sure yet, but looks like im going to be setting pretty low. I have pictures beeing developed...
  4. TurboDoctor

    Heddman header exhaust leak... how to get rid of it?

    Thats how I do my headers also. I Cut the mounting flanges between every tube. I also use studs not bolts. You can buy studs from anywhere and they work alot better than bolts. I had a pair of hookers on my 62 ss that would not stop leaking. So i took some flat metal and traced the gasket onto...
  5. TurboDoctor

    mounting 5" tach w/ shift light in a 66

    I mounted mine where the radio was located. I had a monster tach with shift light, one oil pressure light and one temp light. I made a bracket out of 1/2 mild steel tubbing and ran it back under the dash to the fire wall and bolted it with to 5/16 bolts. I made a plate out of 18 gauge sheet...
  6. TurboDoctor

    Need 4 link pics/opinions

    Go with the four link but be sure you buy a good kit. For the most part they take care all the chassie dynamics for you and you just have to spend some time dialing it for your needs and likes. Comp. Engineering makes a great kit for about 900 bucks. As far as aitbags go I would stay away from...
  7. TurboDoctor

    1965 Radio Repair Dash Panel

    what the hell happened here :shrug: sorry bout that
  8. TurboDoctor

    1965 Radio Repair Dash Panel

    Its a straight forward repair. Only thing I suggest is not using the whole patch. I actually cut the hole in dash where it had been cut for the radio as a square as possible with a dremel and a small cut off wheel. Then i messured the hole in the dash and cut just that from the patch and tack...
  9. TurboDoctor

    1965 Radio Repair Dash Panel

    Its a straight forward repair. Only thing I suggest is not using the whole patch. I actually cut the hole in dash where it had been cut for the radio as a square as possible with a dremel and a small cut off wheel. Then i messured the hole in the dash and cut just that from the patch and tack...
  10. TurboDoctor

    1965 Radio Repair Dash Panel

    Its a straight forward repair. Only thing I suggest is not using the whole patch. I actually cut the hole in dash where it had been cut for the radio as a square as possible with a dremel and a small cut off wheel. Then i messured the hole in the dash and cut just that from the patch and tack...
  11. TurboDoctor

    1965 Radio Repair Dash Panel

    Its a straight forward repair. Only thing I suggest is not using the whole patch. I actually cut the hole in dash where it had been cut for the radio as a square as possible with a dremel and a small cut off wheel. Then i messured the hole in the dash and cut just that from the patch and tack...
  12. TurboDoctor

    Saddam is Captured!!!!!!

    OOOOHRAHHH
  13. TurboDoctor

    Cable Clutch

    I cant get it to post for some reason, email maybe ?
  14. TurboDoctor

    Cable Clutch

    Sorry it took me so long to get it to you. I dont know if you will be able to see the picture in detial or not. Keep in mind im no artist either. Like i said, once you get all the pieces rounded up and you actually get under there and look its really simple to see what you need to do and where...
  15. TurboDoctor

    T-5 crossmember

    pinion angle has nothing to do with where you put the tail shaft, pinion angle has to deal with where the angle of the rear yoke on the differental, in simple terms. However if you dont alighn the tail shaft you will have u-joint issue and possibly vibration. But all you have to do is center it...
  16. TurboDoctor

    Front Suspension Choices

    soak all your bushings in rubbing alchohol and powder graphite for a few days before you install them. no squeaks no cracks.
  17. TurboDoctor

    Cable Clutch

    as shelbyseven said the teeth are for the stock adjustment system that sucked to begin with so you dont need them. My set up is adjustable on the rod. one end is left hand threaded and the other is right hand threads. You can adjust it with a 9/16 wrench fairly easy.
  18. TurboDoctor

    Cable Clutch

    I forgot my folder of stuff in my tool box at work. Ill be sure to get it tommorow for you though and let you see the diagrahms. It will make sence once you see it in a drawing. You can do just the cable part for about 30 bucks in parts. I was able to locate all the stuff at my local bolt...
  19. TurboDoctor

    Cable Clutch

    To bad i wasnt living in livermore anymore or i wouild give you my old setup. I built my own. I took a stock adjustable clutch cable for a fox body from auto zone. Went down to the junk yard and got a stcok clutch quadrent from a fox body. I took the pedal support out from the car. I took the...
  20. TurboDoctor

    T-5 crossmember

    You dont need specs really. Just bolt the tranny in place and jack it up under the center to where you want it to sit and messure the distane from mounting point on the frame, and the drop from the trans mount. Theres not really much to it. 3 simple messuerments and thats it. No need to get all...
Top Bottom
Back
Forums
Menu