Search results

  1. R

    Difference in stock cams??

    Hey Grover I don't know who made that chart but almost every cam spec listed on there is wrong.
  2. R

    I own the slowest h/c/i mustang in the world

    Hey I lost almost 100 HP on one cam & 50 HP on another, got to find the right cam ;)
  3. R

    E7te Heads How Many Cc's

    They are 53cc. I know this from AFR website & I called Ford Racing.
  4. R

    Pedestal mount rocker question

    Ya there is a pain staking procedure installing rockers, pedastal are harder than stud actually as pedestal it's 1/4-1 full turn from zero lash to reach 19lbs torque & you have to do every cylinder one @ a time rotating the crank each lifter on base circle on every cylinder, torqueing em down &...
  5. R

    wideband o2 sensor(s)

    Innovative lm1 is what I got, it has a digital readout with data recording & optional guage mount.
  6. R

    i need a god damn meter. what should i get?

    You can still pick them up @ ebay or a reseller that still has stock.
  7. R

    wideband o2 sensor(s)

    Widebands have nothing to do with your narrow band & even the ones that are rigged up to are not very accurate @ all, if you want a wideband you have to weld in a new bung & install it seperately from your narrow band.
  8. R

    Is an Ecam too small????

    Sorry I meant the #18 "not #19" & it's price I do beleive right now is $179.00. But for a blower cam ya the #19 is the way to go as that is the one I'm gonna buy Crane makes em & crane is on backorder right now I'm still waiting for a 19 to come available but 18's you can still buy, only...
  9. R

    Is an Ecam too small????

    B31 Has a 112 lobe seperation I do beleive & the e has a 110 so the b31 would be a better choice but if you looking to save a buck go with the Steeda #18 that's my suggestion.
  10. R

    S/C blew lower intake gasket?

    This type of thing is common even without a blower, ford recommends you use Blue RTV Silicone I would suggest that over the little rubber peices that you would get @ autozone or wherever when buying a new gasket kit, make a nice big fat beed from head to head & set the lower back on there...
  11. R

    First time driving car after h/i/c. All I have to say is... WOW

    Install a Kenne Bell :D As for the rockers you must not have installed them correctly if they tick, there is a long pain staking procedure in correctly installing roller rockers & if you got rockers ticking I would highly suggest you do not drive it untill you fixed them.
  12. R

    cam reccommendation

    Basicaly, I would suggest the e over the b though as the b will make your car feel real sluggish down low but if your into saving $ I would have to suggest the Steeda cams as they actually cheaper & better, I'd say get the Steeda #19 but the #18 would work fine aswell.
  13. R

    331 Stoker kit ?

    Well I'm seeing 10 pounds now & that's with only a 8lb pulley & I can still bump it up another few pounds aswell without exceeding the rpm of the blower, 10 pounds is actually what I was planning on running so ? I was looking @ 3 different 331 kits all of wich have forged rods & nodular iron...
  14. R

    331 Stoker kit ?

    Hmm, so your telling me a 331 stroker with my heads, cam & blower will not give me anymore power but will hurt me more than do good ? What about if I use a 342 stroker reusing stock pistons, will that maintain my stock compression ratios or be worse because it's a 342 ?
  15. R

    331 Stoker kit ?

    So a stroker will breath better than a normal 302 then ? I found 3 stroker kits to choose from, compression ratios are as follows: Keith Black 9:5, Probe 8:4 & Mahle 8:7 couldn't find anything any closer to stock so I guess I would be best to go with the Mahle kit with a 8:7 compression ratio...
  16. R

    331 Stoker kit ?

    I was talking about compression, stock is 9:01 with 64cc heads right ?
  17. R

    331 Stoker kit ?

    Well I may not really raise boost but maybe 1 pound but wouldn't ya think I'd be able to just a bit & maybe some more timing @ the top with a lower compression ratio, I don't know how low & am open for suggestions but I figure somewhere around 8.6 would be perfect considering stock is what 9.0 ?
  18. R

    331 Stoker kit ?

    Well I tried 2 cams & both of em made me loose power so I figured a 331 since I did not want to buy new heads because I just bought these y303's a few months ago & raising boost did not seem to do nothing. Hopefully someone else can chime in to the hp/tq gains from a 331 stroker over...
  19. R

    331 Stoker kit ?

    So does a 331 improve power, if so how much are we talking ?
  20. R

    331 Stoker kit ?

    What kind of #'s are you getting with your setup & how much boost are you running & is it intercooled ?
Top Bottom
Back
Forums
Menu